522 research outputs found
Obstacles to Internationalizing American High School Curricula: Teacher Perspectives on Teaching World Literature in Hawai‘i.
Ph.D. Thesis. University of Hawaiʻi at Mānoa 2017
Interlayer Magnetic Frustration in Quasi-stoichiometric Li1-xNi1+xO2
Susceptibility, high-field magnetization and submillimeter wave electron spin
resonance measurements of layered quasi-stoichiometric Li1-xNi1+xO2 are
reported and compared to isomorphic NaNiO2. A new mechanism of magnetic
frustration induced by the excess Ni ions always present in the Li layers is
proposed. We finally comment on the possible realization of an orbital liquid
state in this controversial compound.Comment: 4 pages, 5 figures, submitted to Phys.Rev.B, Rapid Com
Drug Delivery Micropump with Built-In Monitoring
AbstractWe report on the fabrication of the first MEMS micropump including an integrated pressure sensor. The signal of this sensor allows direct insight into the pump's operating dynamics and enables real-time self-monitoring. We demonstrate the changes in the sensor signal under different pumping conditions, including the presence of air in the pumping chamber and a downstream occlusions. Deviations from normal operating conditions create clear and characteristic deviations from the normal signal. These deviations will be exploited to detect extraordinary or faulty pumping conditions during use
ND1 COST-EFFECTIVENESS OF DISEASE-MODIFYING THERAPY FOR MULTIPLE SCLEROSIS: A POPULATION-BASED EVALUATION
Quantitative features of multifractal subtleties in time series
Based on the Multifractal Detrended Fluctuation Analysis (MFDFA) and on the
Wavelet Transform Modulus Maxima (WTMM) methods we investigate the origin of
multifractality in the time series. Series fluctuating according to a qGaussian
distribution, both uncorrelated and correlated in time, are used. For the
uncorrelated series at the border (q=5/3) between the Gaussian and the Levy
basins of attraction asymptotically we find a phase-like transition between
monofractal and bifractal characteristics. This indicates that these may solely
be the specific nonlinear temporal correlations that organize the series into a
genuine multifractal hierarchy. For analyzing various features of
multifractality due to such correlations, we use the model series generated
from the binomial cascade as well as empirical series. Then, within the
temporal ranges of well developed power-law correlations we find a fast
convergence in all multifractal measures. Besides of its practical significance
this fact may reflect another manifestation of a conjectured q-generalized
Central Limit Theorem
Purification and properties of the native form of rabbit liver aldolase. Evidence for proteolytic modification after tissue extraction
Infusion Micro-Pump Development Using MEMS Technology
International audienceDiabetes is a chronic condition that occurs when the pancreas does not produce enough insulin or when the body cannot effectively use the insulin it produces. People having type 1 diabetes require insulin (10% of all diabetics). People with type 2 diabetes can be treated with oral medication, but may also require insulin; 10% of all type 2 diabetics require insulin. Among the actual different methods to administer insulin (syringes, pens and conventional infusion pumps) a possibility to increase infuser performances is offered by the utilization of silicon based MEMS pumps (Micro- Electro Mechanical Systems). The main two pump families are classified as mechanical and non-mechanical pumps. The former contains check-valve, peristaltic, rectification without valves and rotary ones (“Displacement Pumps”) or Ultrasonic and Centrifugal (“Dynamic Pumps”); the latter consists in Pressure, Concentration, Electrical Potential gradients and Magnetic Potential micro-pumps. The micro-pump described here is an electro-mechanical device actuated with a piezoelectric-element and based on MEMS technology, able to minimize size and costs, offering a high precision pharmacological dispense. Three slices are bonded to reach the final results: top and bottom caps and an intermediate SOI. In case of anodic bonding, top and bottom caps are constituted of micromachined borophosphosilicate wafers, whereas in case of metallic bonding three silicon slices are used. The paper deals with the fabrication evolution of the device according to the different items that had to be faced during development: design, fluidic, mechanical and electrical simulations and characterization, safety requirements and final testing. Built-in reliability is ensured by two inner sensors able to detect any occlusion or malfunctioning and informing so the patient. The result is a compact, core pump chip that can deliver from 0.02 Units of insulin up to 3.6 Units per minute with accuracy better than 5%
3D-Printed Low-Profile Single-Substrate Multi-Metal Layer Antennas and Array With Bandwidth Enhancement
This paper presents a few single-substrate multi-metal layer antennas using additively manufactured electronics (AME) solution based on piezoelectric additive fabrication. By vertically stacking metal layers in a 3D printed single substrate, the designed antenna prototype exhibits the advantages of wide bandwidth and ultra-low profile. For proof-of-concept, multi-layer linear polarization (LP) patch antenna elements and 2×2 LP antenna arrays are designed, fabricated, and measured. It verifies that the feeding network can be integrated into the same substrate of the antenna array element without increasing the size and profile of the array. Compared with the traditional single-layer LP patch antenna, the proposed LP patch antenna can improve the impedance bandwidth from 5.9% to 10.6% (three layers) and 83% (seven layers), respectively. All these designs can be fabricated in a single substrate with a thickness of 1.5 mm ( 0.031 λg ), which is an ideal solution for the applications where ultra-low profile and wideband patch antenna are expected. Finally, circular polarization (CP) patch antenna elements and 2×2 CP antenna arrays are fabricated and measured. Good agreements between the simulated and the measured results verify that wider impedance bandwidth and broader frequency range of under 3-dB axial ratio can be obtained by vertically stacking metal layers. The antennas are designed at sub-6GHz, which have great potentials for 5G consumer mobile electronics
Pre-exposure prophylaxis for preventing acquisition of HIV: A cross-sectional study of patients, prescribers, uptake, and spending in the United States, 2015-2016
BACKGROUND: In 2015, there were approximately 40,000 new HIV diagnoses in the United States. Pre-exposure prophylaxis (PrEP) is an effective strategy that reduces the risk of HIV acquisition; however, uptake among those who can benefit from it has lagged. In this study, we 1) compared the characteristics of patients who were prescribed PrEP with individuals newly diagnosed with HIV infection, 2) identified the specialties of practitioners prescribing PrEP, 3) identified metropolitan statistical areas (MSAs) within the US where there is relatively low uptake of PrEP, and 4) reported median amounts paid by patients and third-party payors for PrEP.
METHODS AND FINDINGS: We analyzed prescription drug claims for individuals prescribed PrEP in the Integrated Dataverse (IDV) from Symphony Health for the period of September 2015 to August 2016 to describe PrEP patients, prescribers, relative uptake, and payment methods in the US. Data were available for 75,839 individuals prescribed PrEP, and findings were extrapolated to approximately 101,000 individuals, which is less than 10% of the 1.1 million adults for whom PrEP was indicated. Compared to individuals with newly diagnosed HIV infection, PrEP patients were more likely to be non-Hispanic white (45% versus 26.2%), older (25% versus 19% at ages 35-44), male (94% versus 81%), and not reside in the South (30% versus 52% reside in the South).Using a ratio of the number of PrEP patients within an MSA to the number of newly diagnosed individuals with HIV infection, we found MSAs with relatively low uptake of PrEP were concentrated in the South. Of the approximately 24,000 providers who prescribed PrEP, two-thirds reported primary care as their specialty. Compared to the types of payment methods that people living with diagnosed HIV (PLWH) used to pay for their antiretroviral treatment in 2015 to 2016 reported in the Centers for Disease Control and Prevention (CDC) HIV Surveillance Special Report, PrEP patients were more likely to have used commercial health insurance (80% versus 35%) and less likely to have used public healthcare coverage or a publicly sponsored assistance program to pay for PrEP (12% versus 45% for Medicaid). Third-party payors covered 95% of the costs of PrEP. Overall, we estimated the median annual per patient out-of-pocket spending on PrEP was approximately US$72. Limitations of this study include missing information on prescription claims of patients not included in the database, and for those included, some patients were missing information on patient diagnosis, race/ethnicity, educational attainment, and income (34%-36%).
CONCLUSIONS: Our findings indicate that in 2015-2016, many individuals in the US who could benefit from being on PrEP were not receiving this HIV prevention medication, and those prescribed PrEP had a significantly different distribution of characteristics from the broader population that is at risk for acquiring HIV. PrEP patients were more likely to pay for PrEP using commercial or private insurance, whereas PLWH were more likely to pay for their antiretroviral treatment using publicly sponsored programs. Addressing the affordability of PrEP and otherwise promoting its use among those with indications for PrEP represents an important opportunity to help end the HIV epidemic
- …