Synthesis and Photovoltaic Performance of Pyrazinoquinoxaline Containing Conjugated Thiophene-Based Dendrimers and Polymers

Pyrazinoquinoxaline-based building blocks were incorporated into both π-conjugated dendrimers and polymers. The dendrimers were synthesized using a convergent/divergent approach whereas the donor/acceptor copolymers were synthesized via Stille cross-coupling reactions. The structurally defined dendrimers and the π-conjugated polymers were investigated with respect to their optical and electronic properties as well as their performance in photovoltaic devices. Because of the presence of the electron-deficient pyrazinoquinoxaline moiety, the absorption spectra of the materials under investigation were red-shifted with respect to the all thiophene-containing materials. Power conversion efficiencies up to 1.7 and 0.8% were obtained from blends of second-generation dendrimers and polymers with PC₇₁BM, respectively

Silane-Capped ZnO Nanoparticles for Use as the Electron Transport Layer in Inverted Organic Solar Cells

Zinc oxide (ZnO) nanoparticles are widely used as electron- transport layer (ETL) materials in organic solar cells and are considered to be the candidate with the most potential for ETLs in roll-to-roll (R2R)-printed photovoltaics. However, the tendency of the nanoparticles to aggregate reduces the stability of the metal oxide inks and creates many surface defects, which is a major barrier to its printing application. With the aim of improving the stability of metal oxide nanoparticle dispersions and suppressing the formation of surface defects, we prepared 3-aminopropyltrimethoxysilane (APTMS)-capped ZnO (ZnO@APTMS) nanoparticles through surface ligand exchange. The ZnO@APTMS nanoparticles exhibited excellent dispersibility in ethanol, an environmentally friendly solvent, and remained stable in air for at least one year without any aggregation. The capping of the ZnO nanoparticles with APTMS also reduced the number of surface-adsorbed oxygen defects, improved the charge transfer efficiency, and suppressed the light-soaking effect. The thickness of the ZnO@APTMS ETL could reach 100 nm without an obvious decrease in the performance. Large-area APTMS-modified ZnO films were successfully fabricated through roll-to-roll microgravure printing and exhibited good performance in flexible organic solar cells. This work demonstrated the distinct advantages of this ZnO@APTMS ETL as a potential buffer layer for printed organic electronics

Power Conversion Efficiency and Device Stability Improvement of Inverted Perovskite Solar Cells by Using a ZnO:PFN Composite Cathode Buffer Layer

We have demonstrated in this article that both power conversion efficiency (PCE) and performance stability of inverted planar heterojunction perovskite solar cells can be improved by using a ZnO:PFN nanocomposite (PFN: poly­[(9,9-bis­(3′-(<i>N</i>,<i>N</i>-dimethylamion)­propyl)-2,7-fluorene)-<i>alt</i>-2,7-(9,9-dioctyl)-fluorene]) as the cathode buffer layer (CBL). This nanocomposite could form a compact and defect-less CBL film on the perovskite/PC₆₁BM surface (PC₆₁BM: phenyl-C₆₁-butyric acid methyl ester). In addition, the high conductivity of the nanocomposite layer makes it works well at a layer thickness of 150 nm. Both advantages of the composite layer are helpful in reducing interface charge recombination and improving device performance. The power conversion efficiency (PCE) of the best ZnO:PFN CBL based device was measured to be 12.76%, which is higher than that of device without CBL (9.00%), or device with ZnO (7.93%) or PFN (11.30%) as the cathode buffer layer. In addition, the long-term stability is improved by using ZnO:PFN composite cathode buffer layer when compare to that of the reference cells. Almost no degradation of open circuit voltage (<i>V</i>_OC) and fill factor (FF) was found for the device having ZnO:PFN, suggesting that ZnO:PFN is able to stabilize the interface property and consequently improve the solar cell performance stability

Fully Coated Semitransparent Organic Solar Cells with a Doctor-Blade-Coated Composite Anode Buffer Layer of Phosphomolybdic Acid and PEDOT:PSS and a Spray-Coated Silver Nanowire Top Electrode

In the aim to realize high performance semitransparent fully coated organic solar cells, printable electrode buffer layers and top electrodes are two important key technologies. An ideal ink for the preparation of the electrode buffer layer for printed top electrodes should have good wettability and negligible solvent corrosion to the underlying layer. This work reports a novel organic–inorganic composite of phosphomolybdic acid (PMA) and PEDOT:PSS that features excellent wettability with the active layer and printed top Ag nanowires and high resistibility to solvent corrosion. This composite buffer layer can be easily deposited on a polymer surface to form a smooth, homogeneous film via spin-coating or doctor-blade coating. Through the use of this composite anode buffer layer, fully coated semitransparent devices with doctor-blade-coated functional layers and spray-coated Ag nanowire top electrodes showed the highest power conversion efficiency (PCE) of 5.01% with an excellent average visible-light transmittance (AVT) of 50.3%, demonstrating superior overall characteristics with a comparable performance to and a much higher AVT than cells based on a thermally evaporated MoO₃/Ag/MoO₃ thin film electrode (with a PCE of 5.77% and AVT of 19.5%). The current work reports the fabrication of fully coated inverted organic solar cells by combining doctor-blade coating and spray coating and, more importantly, demonstrates that a nanocomposite of a polyoxometalate and conjugated polymer could be an excellent anode buffer layer for the fully coated polymer solar cells with favorable interfacial contact, hole extraction efficiency, and high comparability with full printing