PERFORMANCE EVALUATION OF HYBRID SOLAR AIRWATER HEATER WITH VARIOUS INLET AIR TEMPERATURE DURING HEATING PROCESS

Research about hybrid solar air-water heater that can heating both air and liquid has been conducted for enhancing the usage of solar thermal energy. In the previous study, thermal efficiency of this collector was investigated with many operating and external conditions, but all of previous experiment conducted using outdoor air as inlet air of collector. Thus, in this study, the performance change of hybrid solar air-water heater was investigated with change of inlet air temperature during air and liquid were heated simultaneously. As a result, thermal efficiency for liquid heating was increased with increment of the inlet air temperature. On the contrary to this, thermal efficiency for air heating of collector was decreased with increment of inlet air temperature. In case of total thermal efficiency of collector considered air and liquid heat gain, it was also decreased with increment of inlet air temperature. From these results, it was confirmed that using outdoor air directly as inlet air of collector is better for the use of solar energy. However it is hard to conclude that which is better between using outdoor air and heated air on the perspective of energy saving of building because heat storage performance was increased if the return air or any heated air is used as inlet air of hybrid solar air-water heater when air and liquid was heated simultaneously even air and total thermal efficiency is decreased. Thus, the necessity of more profound study and consideration about this as a further study was also confirmed

Advanced Technologies for Large-Sized OLED Display

Five years have passed, since the first 55″ full high-definition (FHD) OLED TV fabricated on Gen 8.5 glass was successfully launched into the TV market. For the time being, the size of OLED TV became diverse from 55″ to 77″, and the resolution was doubled into ultrahigh definition (UHD). The brightness and color gamut were enhanced, while the lower power consumption was realized. Utmost picture quality and slim form factor of OLED TV as well as the improved performance have made OLED TV recognized as the best premium TV. In this chapter, we describe the recent progress in three key technologies, which enable such an enhancement of performance in OLED TV, i.e., oxide thin-film transistor (TFT) and white organic light-emitting diode (WOLED), compensation circuit, and method to compensate the nonuniformity of oxide TFTs, OLED devices, and luminance

Acute dystonia by droperidol during intravenous patient-controlled analgesia in young patients.

Patient-controlled analgesia (PCA) is an important means for postoperative analgesia with parenteral opioid. However, postoperative nausea and vomiting (PONV) remains a major problem with a PCA system. Droperidol is used in PCA to prevent PONV. Extrapyramidal reactions by droperidol are, however, occasionally induced. We describe two cases of severe extrapyramidal hypertonic syndrome with an intravenous administration of droperidol in PCA in young patients, following orthopedic surgery

Improvement of Mechanical Properties of UV-curable Resin for High-aspect Ratio Microstructures Fabricated in Microstereolithography

Recently, microstructures fabricated using microstereolithography technology have been used in the biological, medical and mechanical fields. Microstereolithography can fabricate real 3D microstructures with fine features, although there is presently a limited number of materials available for use in the process. Deformation of the fine features on a fabricated microstructure remains a critical issue for successful part fabrication, and part deformation can occur during rinsing or during fabrication as a result of fluid flow forces that occur during movement of mechanical parts of the system. Deformation can result in failure to fabricate a particular feature by breaking the feature completely, spatial deflection of the feature, or attaching the feature to neighboring microstructures. To improve mechanical strength of fabricated microstructures, a clay nanocomposite can be used. In particular, a high-aspect ratio microstructure can be fabricated without distortion using photocurable liquid resin containing a clay nanocomposite. In this paper, a clay nanocomposite was blended with a photocurable liquid resin to solve the deformation problem that occurs during fabrication and rinsing. An optimal mixture ratio of a clay nanocomposite was found through tensile testing and the minimal allowable distance between microstructures was found through fabrication experimentation. Finally, using these results, high-aspect ratio microstructures were fabricated using a clay nanocomposite resin without distortion

Moisture Content Prediction Below and Above Fiber Saturation Point by Partial Least Squares Regression Analysis on Near Infrared Absorption Spectra of Korean Pine

This study was performed to predict the surface moisture content of Korean pine (Pinus koraiensis) with low moisture content (approximately 0%) and high moisture content above the FSP using near IR spectroscopy. Near IR absorbance spectra of circular specimens were acquired at various moisture contents at 25°C. To enhance the precision of the regression model, mathematical preprocessing was performed by determining the three-point moving average and Norris second derivatives. After preprocessing, partial least squares regression was carried out to establish the surface moisture content prediction model. We divided the specimens into two groups based on their moisture contents. For the first group, which possessed moisture contents less than 30%, the R2 values and root mean squared error of prediction (RMSEP) of the model were 0.96 and 1.48, respectively. For the second group, which possessed moisture contents greater than 30%, the R2 values and RMSEP of the model were 0.94 and 4.88, respectively. For all moisture contents, the R2 and RMSEP were 0.96 and 5.15, respectively. As the range of moisture contents included in the prediction model was expanded, the error of the model increased. In addition, the peak positions of the water absorption band (1440 and 1930 nm) shifted to longer wavelengths at higher moisture contents

Calcium-binding Protein Calretinin Immunoreactivity in the Dog Superior Colliculus

We studied calretinin-immunoreactive (IR) fibers and cells in the canine superior colliculus (SC) and studied the distribution and effect of enucleation on the distribution of this protein. Localization of calretinin was immunocytochemically observed. A dense plexus of anti-­calretinin-IR fibers was found within the upper part of the superficial gray layer (SGL). Almost all of the labeled fibers were small in diameter with few varicosities. The intermediate and deep layers contained many calretinin-IR neurons. Labeled neurons within the intermediate gray layer (IGL) formed clusters in many sections. By contrast, labeled neurons in the deep gray layer (DGL) did not form clusters. Calretinin-IR neurons in the IGL and DGL varied in morphology and included round/oval, vertical fusiform, stellate, and horizontal neurons. Neurons with varicose dendrites were also labeled in the IGL. Most of the labeled neurons were small to medium in size. Monocular enucleation produced an almost complete reduction of calretinin-IR fibers in the SC contralateral to the enucleation. However, many calretinin-IR cells appeared in the contralateral superficial SC. Enucleation appeared to have no effect on the distribution of calretinin-IR neurons in the contralateral intermediate and deep layers of the SC. The calretinin-IR neurons in the superficial dog SC were heterogeneous small- to medium-sized neurons including round/oval, vertical fusiform, stellate, pyriform, and ­horizontal in shape. Two-color immunofluorescence revealed that no cells in the dog SC ­expressed both calretinin and GABA. Many horseradish peroxidase (HRP)-labeled retinal ganglion cells were seen after injections into the superficial layers. The vast majority of the double-labeled cells (HRP and calretinin) were small cells. The present results indicate that antibody to calretinin labels subpopulations of neurons in the dog SC, which do not express GABA. The results also suggest that the calretinin-IR afferents in the superficial layers of the dog SC originate from small class retinal ganglion cells. The expression of calretinin might be changed by the cellular activity of selective superficial collicular neurons. These results are valuable in delineating the basic neurochemical architecture of the dog visual system

Newly developed post-operative atrial fibrillation is associated with an increased risk of late recurrence of atrial fibrillation in patients who underwent open heart surgery: Long-term follow up

Background: Herein is sought to determine whether the occurrence of post-operative atrial fibrillation (POAF) increases the risk of late recurrence of atrial fibrillation (AF) in patients undergoing open heart surgery (OHS). Methods: This study included 938 patients (56.7 ± 13.1 years old, 550 males) with no history of AF who underwent OHS. All patients were monitored continuously for development of POAF after surgery until the time of hospital discharge and received clinical follow up with serial evaluation of rhythm status. Results: Among the total population, POAF occurred in 207 (22.1%) patients and late AF in 88 (9.4%) patients during the mean follow up period of 78.1 ± 39.1 months. Development of late AF oc¬curred more frequently in patients with POAF than in those without [29.0% (60/207) vs. 3.8% (28/731), p < 0.01]. Higher septal E/e’ ratio (HR 1.04, 95% CI 1.00–1.08, p = 0.04) was an independent predic¬tor of late occurrence of AF and an episode of POAF (HR 27.12, 95% CI 8.46–86.96, p < 0.01) was the most powerful predictor. Conclusions: POAF is significantly associated with an increased risk of late AF recurrence during long-term follow up. Careful concern regarding late recurrence of AF with serial evaluation of rhythm status is required in patients with POAF