Una storia moderna

Team S 55: riscoprire un progetto del passato per proiettarlo nel futuro. Il gruppo di lavoro sta progettando un aeromodello a propulsione elettrica in scala 1:8, del Savoia Marchetti S55, propedeutico per lo sviluppo di competenze su metodi di analisi e indagine sulla possibilità di utilizzo di nuove tecnologie e processi produttiv

How future surgery will benefit from SARS-COV-2-related measures: a SPIGC survey conveying the perspective of Italian surgeons

COVID-19 negatively affected surgical activity, but the potential benefits resulting from adopted measures remain unclear. The aim of this study was to evaluate the change in surgical activity and potential benefit from COVID-19 measures in perspective of Italian surgeons on behalf of SPIGC. A nationwide online survey on surgical practice before, during, and after COVID-19 pandemic was conducted in March-April 2022 (NCT:05323851). Effects of COVID-19 hospital-related measures on surgical patients' management and personal professional development across surgical specialties were explored. Data on demographics, pre-operative/peri-operative/post-operative management, and professional development were collected. Outcomes were matched with the corresponding volume. Four hundred and seventy-three respondents were included in final analysis across 14 surgical specialties. Since SARS-CoV-2 pandemic, application of telematic consultations (4.1% vs. 21.6%; p < 0.0001) and diagnostic evaluations (16.4% vs. 42.2%; p < 0.0001) increased. Elective surgical activities significantly reduced and surgeons opted more frequently for conservative management with a possible indication for elective (26.3% vs. 35.7%; p < 0.0001) or urgent (20.4% vs. 38.5%; p < 0.0001) surgery. All new COVID-related measures are perceived to be maintained in the future. Surgeons' personal education online increased from 12.6% (pre-COVID) to 86.6% (post-COVID; p < 0.0001). Online educational activities are considered a beneficial effect from COVID pandemic (56.4%). COVID-19 had a great impact on surgical specialties, with significant reduction of operation volume. However, some forced changes turned out to be benefits. Isolation measures pushed the use of telemedicine and telemetric devices for outpatient practice and favored communication for educational purposes and surgeon-patient/family communication. From the Italian surgeons' perspective, COVID-related measures will continue to influence future surgical clinical practice

Laparoscopic right hemicolectomy: a SICE (Società Italiana di Chirurgia Endoscopica e Nuove tecnologie) network prospective study on the approach to right colon lymphadenectomy in Italy: is there a standard?—CoDIG 2 (ColonDx Italian Group)

Background: Colon cancer is a disease with a worldwide spread. Surgery is the best option for the treatment of advanced colon cancer, but some aspects are still debated, such as the extent of lymphadenectomy. In Japanese guidelines, the gold standard was D3 dissection to remove the central lymph nodes (203, 213, and 223), but in 2009, Hoenberger et al. introduced the concept of complete mesocolic excision, in which surgical dissection follows the embryological planes to remove the mesentery entirely to prevent leakage of cancer cells and collect more lymph nodes. Our study describes how lymphadenectomy is currently performed in major Italian centers with an unclear indication on the type of lymphadenectomy that should be performed during right hemicolectomy (RH). Methods: CoDIG 2 is an observational multicenter national study that involves 76 Italian general surgery wards highly specialized in colorectal surgery. Each center was asked not to modify their usual surgical and clinical practices. The aim of the study was to assess the preference of Italian surgeons on the type of lymphadenectomy to perform during RH and the rise of any new trends or modifications in habits compared to the findings of the CoDIG 1 study conducted 4 years ago. Results: A total of 788 patients were enrolled. The most commonly used surgical technique was laparoscopic (82.1%) with intracorporeal (73.4%), side-to-side (98.7%), or isoperistaltic (96.0%) anastomosis. The lymph nodes at the origin of the vessels were harvested in an inferior number of cases (203, 213, and 223: 42.4%, 31.1%, and 20.3%, respectively). A comparison between CoDIG 1 and CoDIG 2 showed a stable trend in surgical techniques and complications, with an increase in the robotic approach (7.7% vs. 12.3%). Conclusions: This analysis shows how lymphadenectomy is performed in Italy to achieve oncological outcomes in RH, although the technique to achieve a higher lymph node count has not yet been standardized. Trial registration (ClinicalTrials.gov) ID: NCT05943951

Global disparities in surgeons’ workloads, academic engagement and rest periods: the on-calL shIft fOr geNEral SurgeonS (LIONESS) study

: The workload of general surgeons is multifaceted, encompassing not only surgical procedures but also a myriad of other responsibilities. From April to May 2023, we conducted a CHERRIES-compliant internet-based survey analyzing clinical practice, academic engagement, and post-on-call rest. The questionnaire featured six sections with 35 questions. Statistical analysis used Chi-square tests, ANOVA, and logistic regression (SPSS® v. 28). The survey received a total of 1.046 responses (65.4%). Over 78.0% of responders came from Europe, 65.1% came from a general surgery unit; 92.8% of European and 87.5% of North American respondents were involved in research, compared to 71.7% in Africa. Europe led in publishing research studies (6.6 ± 8.6 yearly). Teaching involvement was high in North America (100%) and Africa (91.7%). Surgeons reported an average of 6.7 ± 4.9 on-call shifts per month, with European and North American surgeons experiencing 6.5 ± 4.9 and 7.8 ± 4.1 on-calls monthly, respectively. African surgeons had the highest on-call frequency (8.7 ± 6.1). Post-on-call, only 35.1% of respondents received a day off. Europeans were most likely (40%) to have a day off, while African surgeons were least likely (6.7%). On the adjusted multivariable analysis HDI (Human Development Index) (aOR 1.993) hospital capacity > 400 beds (aOR 2.423), working in a specialty surgery unit (aOR 2.087), and making the on-call in-house (aOR 5.446), significantly predicted the likelihood of having a day off after an on-call shift. Our study revealed critical insights into the disparities in workload, access to research, and professional opportunities for surgeons across different continents, underscored by the HDI

Experimental and numerical vibration analysis of plates with curvilinear sub-stiffeners

Curvilinear stiffened panels are being developed for aerospace structures and other applications. This paper presents an experimental and numerical study into the vibration response of three curvilinear stiffened square plates clamped at the edges. The experimental modal analysis was performed using laser Doppler vibrometry (LDV) and an impact hammer test. Two of the three plates was constructed with curvilinear stiffener geometry, while the third was a straight stiffened plate with the stiffeners oriented at an angle to the edge of the plate. Even though the natural frequencies of the plates are similar, the different stiffening patterns was sufficient in providing unique directional properties and therefore distinct mode shapes. The numerical modal analysis of the plates was performed using finite element analysis (FEA). A comparison of the experimental and numerical results was carried out in terms of natural frequencies and mode shapes, using relative differences and modal assurance criterion (MAC), respectively. The experimental and numerical results were in good agreement for all the three plates. The difference between experimental and numerical natural frequencies was typically less than 5% and the diagonal MAC values typically ranged from 0.8 to 1. This is in line with previously published results in the literature. The reasons for differences between the experimental and numerical results, and the practical significance of the findings, are also discussed

Parathyroid Carcinoma: An Up-to-Date Retrospective Multicentric Analysis

Parathyroid carcinoma (PC) is a rare disease responsible for about 1% of primary hyperparathyroidism (PHPT) cases. PC usually has an indolent course, tough to differentiate from the benign causes of PHPT, and the only certain diagnosis is histologic. The gold standard surgical treatment is the en bloc resection associated with the homolateral thyroid loboistmectomy. The aim of this study was to underline the main differences between PC and benign PHPT, along with gathering epidemiological knowledge relative to PC in our region. Data from the regional cancer network (Rete Oncologica del Piemonte e della Valle d’Aosta) since 2007 have been reported, including 21 patients from three hospitals (AO S. Croce e Carle of Cuneo, AOU Città della Salute of Turin, and ASL Città di Torino). The incidence of the disease, gender, age at time of diagnosis, presence of renal and bone symptoms, serum calcium and PTH levels, surgical technique performed, and percentage of recurrence were analysed. PC data were than compared with a series of patients affected by benign PHPT, referred to ASL Città di Torino, Maria Vittoria Hospital, from 2007 to 2019. A PC incidence of 0.05 cases per 100,000 inhabitants was found in our region. Benign forms occurred more frequently in females (p=0.0002), while PC equally occurred in males and females and affected younger patients (p=0.026). Serum calcium and PTH levels were significantly higher in PC patients; accordingly, typical PHPT symptoms were more frequently reported in PC than in benign PHPT. In the PC group, the en bloc resection shows a 13 times lower risk for relapse compared with all the other surgical techniques. PC is equally gender distributed, and the average patients’ age is in the fifth decade of life. It is usually functioning, with greater biochemical activity and multiple symptoms. A not-radical surgical resection is associated with a higher recurrence rate. A meticulous presurgical evaluation of PHPT patients showing PC’s evocative features is mandatory to obtain a complete disease extirpation

Design And Manufacturing Through Additive Manufacturing Of RPAV Fastening And Components

The methodology used in designing and manufacturing of some components of an RC airplane replica of the historical seaplane S55 X designed by A. Marchetti in 1923 is presented. Advantages in designing joining components by using all the utilities of CAD design and topology optimization coupled with the benefit of SLM (Selective Laser Melting) method are presente

FEM Simulation of AlSi10Mg Artifact for Additive Manufacturing Process Calibration with Industrial-Computed Tomography Validation

Dimensional accuracy of selective laser melting (SLM) parts is one of manufacturers’ major concerns. The additive manufacturing (AM) process is characterized by high-temperature gradients, consolidation, and thermal expansion, which induce residual stress on the part. These stresses are released by separating the part from the baseplate, leading to plastic deformation. Thermo-mechanical finite elements (FE) simulation can be adopted to determine the effect of process parameters on final geometrical accuracy and minimize non-compliant parts. In this research, a geometry for process parameter calibration is presented. The part has been manufactured and then analyzed with industrial computed tomography (iCT). An FE process simulation has been performed considering material removal during base plate separation, and the computed distortions have been compared with the results of the iCT, revealing good accordance between the final product and its digital twin