Preparation and Carbonization of Glucose and Pyromellitic Dianhydride Crosslinked Polymers

In this work, four types of nanosponges were prepared from pyromellitic dianhydride (PMDA) and D-glucose (GLU) with different molar ratios (1.5:1, 2:1, 2.5:1 and 3:1). The obtained PMDA/GLU nanosponges were then pyrolyzed at 800 °C for 30 min under N2 gas flow. The prepared polymeric nanosponges were investigated by FTIR spectroscopy, elemental and thermogravimetric analyses to unravel the role played by the different molar ratio of the precursors in the formation of the polymer. The pyrolyzed nanosponges were investigated by means of porosity measurements, X-ray diffraction analysis, Raman spectroscopy and high-resolution transmission electron microscopy. Notably, no significant correlation of the amounts of used precursors with the porous texture and structure was evidenced. The results corroborate that PMDA and GLU can be easily combined to prepare nanosponges and that the carbon materials produced by their pyrolysis can be associated with glassy carbons with a microporous texture and relatively high surface area. Such hard carbons can be easily obtained and shrewdly used to segregate relatively small molecules and organic contaminants; in this study methylene blue adsorption was investigated

Sustainable mechanochemical synthesis of β-cyclodextrin polymers by twin screw extrusion

Cyclodextrin nanosponges (CD-NS) are cross-linked cyclodextrin polymers characterized by a nanostructured three-dimensional network. CD-NSs in the last years found many different applications in the pharmaceutical field for the controlled release of drugs and for the absorption of undesired substances from physiological media, food, and wastewater. Most of CD-NS syntheses involve the solubilization of the chosen CD in closed batch, using a suitable organic polar aprotic liquid, which may affect potential environmental or biomedical applications. Since the research is now moving towards more sustainable approaches, new and greener syntheses of CD-NS are now being developed. Here, it is reported a new eco-friendly and efficient synthesis of nanosponges through mechanochemistry. Mechanochemistry involves the application of mechanical forces to drive and control chemical reactions by transferring energy to chemical bonds. The mechanochemical approach involves the use of a twin-screw extruder (TSE) as a chemical reactor: TSE are capable of fine temperature control and, furthermore, TS Extrusion is a continuous process and not a batch process. Among the many available CD-NS syntheses, we tested our solvent-free approach on a β-CD/citric acid (CA) system. Moreover, using TSE, the same polymer was obtained in a considerably shorter time. The so obtained NSs were used for the adsorption and removal of probe molecules, in comparison with NSs prepared by cross-linking β-CD with CA in batch. GRAPHICAL ABSTRACT: [Image: see text] SUPPLEMENTARY INFORMATION: The online version contains supplementary material available at 10.1007/s11356-021-15187-5

In Situ Assembly of Well-Defined MoS2 Slabs on Shape-Tailored Anatase TiO2 Nanostructures: Heterojunctions Role in Phenol Photodegradation

MoS2/TiO2-based nanostructures have attracted extensive attention due to their high performance in many fields, including photocatalysis. In this contribution, MoS2 nanostructures were prepared via an in situ bottom-up approach at the surface of shape-controlled TiO2 nanoparticles (TiO2 nanosheets and bipyramids). Furthermore, a multi-technique approach by combining electron microscopy and spectroscopic methods was employed. More in detail, the morphology/structure and vibrational/optical properties of MoS2 slabs on TiO2 anatase bipyramidal nanoparticles, mainly exposing {101} facets, and on TiO2 anatase nanosheets exposing both {001} and {101} facets, still covered by MoS2, were compared. It was shown that unlike other widely used methods, the bottom-up approach enabled the atomic-level growth of well-defined MoS2 slabs on TiO2 nanostructures, thus aiming to achieve the most effective chemical interactions. In this regard, two kinds of synergistic heterojunctions, namely, crystal face heterojunctions between anatase TiO2 coexposed {101} and {001} facets and semiconductor heterojunctions between MoS2 and anatase TiO2 nanostructures, were considered to play a role in enhancing the photocatalytic activity, together with a proper ratio of (101), (001) coexposed surfaces

Effect of injection molding conditions on crystalline structure and electrical resistivity of PP/MWCNT nanocomposites

Polypropylene (PP) / multi-walled carbon nanotube (MWCNT) nanocomposites were prepared by melt-mixing and used to manufacture samples by injection molding. The effect of processing conditions on the crystallinity and electrical resistivity was studied. Accordingly, samples were produced varying the mold temperature and injection rate, and the DC electrical resistivity was measured. The morphology of MWCNT clusters was studied by optical and electron microscopy, while X-ray diffraction was used to study the role of the crystalline structure of PP. As a result, an anisotropic electrical behavior induced by the process was observed, which is further influenced by the injection molding processing condition. It was demonstrated that a reduction of electrical resistivity can be obtained by increasing mold temperature and injection rate, which was associated to the formation of the γ-phase and the related inter-cluster morphology of the MWCNT conductive network

Morphology and electrical properties of injection-molded PP carbon-based nanocomposites

The aim of this work was to investigate the influence of the process condition on the morphology of PP/MWCNT nanocomposites and its effect on the electrical properties, experimentally developed in this study. Electrical and morphological characterization was performed in order to analyze the multilayered morphology skin-core-skin, validated by a theoretical model

Society for Immunotherapy of Cancer clinical and biomarkers data sharing resource document: Volume I—conceptual challenges

The sharing of clinical trial data and biomarker data sets among the scientific community, whether the data originates from pharmaceutical companies or academic institutions, is of critical importance to enable the development of new and improved cancer immunotherapy modalities. Through data sharing, a better understanding of current therapies in terms of their efficacy, safety and biomarker data profiles can be achieved. However, the sharing of these data sets involves a number of stakeholder groups including patients, researchers, private industry, scientific journals and professional societies. Each of these stakeholder groups has differing interests in the use and sharing of clinical trial and biomarker data, and the conflicts caused by these differing interests represent significant obstacles to effective, widespread sharing of data. Thus, the Society for Immunotherapy of Cancer (SITC) Biomarkers Committee convened to identify the current barriers to biomarker data sharing in immuno-oncology (IO) and to help in establishing professional standards for the responsible sharing of clinical trial data. The conclusions of the committee are described in two position papers: Volume I-conceptual challenges and Volume II-practical challenges, the first of which is presented in this manuscript. Additionally, the committee suggests actions by key stakeholders in the field (including organizations and professional societies) as the best path forward, encouraging the cultural shift needed to ensure responsible data sharing in the IO research setting