6 research outputs found
Process Modelling Applied to Aluminium-Steel Butt Welding by Hybrid Metal Extrusion and Bonding (HYB)
publishedVersio
FIB-SEM investigation and uniaxial compression of flexible graphite
Flexible graphite (FG) with 1 - 1.2 g/cm density is employed as beam
energy absorber material in the CERN's Large Hadron Collider (LHC) beam dumping
system. However, the increase of energy deposited expected for new HL-LHC
(High-Luminosity LHC) design demanded for an improvement in reliability and
safety of beam dumping devices, and the need for a calibrated material model
suitable for high-level FE simulations has been prioritized. This work sets the
basic knowledge to develop a material model for FG suitable to this aim. A
review of the FG properties available in literature is first given, followed by
FIB-SEM (Focused Ion Beam - Scanning Electron Microscopy) microstructure
investigation and monotonic and cyclic uniaxial compression tests. Similarities
with other well-known groups of materials such as crushable foams, crumpled
materials and compacted powders have been discussed. A simple 1D
phenomenological model has been used to fit the experimental stress-strain
curves and the accuracy of the result supports the assumptions that the
graphite-like microstructure and the crumpled meso-structure play the major
role under out-of-plane uniaxial compression.Comment: Pre-print template, 57 pages, 14 figure
Process Modelling Applied to Aluminium-Steel Butt Welding by Hybrid Metal Extrusion and Bonding (HYB)
In the present investigation, the numerical code WELDSIM is used to simulate butt welding of 4 mm thick plates of S355 steel and AA6082-T6 by Hybrid Metal Extrusion and Bonding (HYB). This is a new solid state joining process using continuous extrusion as a technique to enable aluminium filler metal additions. In WELDSIM, the finite element heat flow model is coupled to a frictional heating model, an isokinetic diffusion model for the interfacial intermetallic compound (IMC) formation and a nanostructure model for simulating reversion and re-precipitation of hardening phases inside the aluminium part of the joints during welding and subsequent natural ageing. The HYB process model is validated by comparison with experimental data obtained from in-situ thermocouple measurements and hardness testing carried out on three different Al-steel butt welds. Furthermore, scanning electron microscope examinations of the Al-steel interfaces have been conducted to check the predicted power of the IMC diffusion model. It is concluded that the process model is sufficiently relevant and comprehensive to be used in simulations of both the thermal, microstructure, and strength evolutions fields in these dissimilar butt welds. Some practical applications of the process model are described toward the end of the article, where particularly its potential for optimising the load-bearing capacity of the joints, is highlighte
Process Modelling Applied to Aluminium-Steel Butt Welding by Hybrid Metal Extrusion and Bonding (HYB)
publishedVersio
Preliminary in-situ study of FIB-assisted method for aluminium solid-state welding at the microscale
In situ studies allow real time monitoring and deep comprehension of phenomena. This approach has been applied to the current research for the development of a novel solid-state welding technique at the microscale. The downscaling of the process has been inspired by Cold Pressure Welding (CPW) working principles and it has been carried out by a tailored setup of a high-resolution Focused Ion Beam – Scanning Electron Microscope (FIB-SEM). This work is primarily aimed at showing how FIB functionalities can be expanded and discussing the challenges that may be encountered by doing that. Therefore, a preliminary FIB-assisted methodology for cold bonding of AA1070 and AA6082 aluminium alloys at the microscale is presented. In situ cross-sectioning of the weld and proper scanning-electron imaging have revealed that, under certain pressure conditions, oxide-free aluminium interfaces are able to be joined at room temperature even at the microscale. Experimental technique improvement and testing of the obtained joints are the next steps needed in this research
FIB-SEM investigation and uniaxial compression of flexible graphite
Flexible graphite (FG) with 1 - 1.2 g/cm density is employed as beam energy absorber material in the CERN's Large Hadron Collider (LHC) beam dumping system. However, the increase of energy deposited expected for new HL-LHC (High-Luminosity LHC) design demanded for an improvement in reliability and safety of beam dumping devices, and the need for a calibrated material model suitable for high-level FE simulations has been prioritized. This work sets the basic knowledge to develop a material model for FG suitable to this aim. A review of the FG properties available in literature is first given, followed by FIB-SEM (Focused Ion Beam - Scanning Electron Microscopy) microstructure investigation and monotonic and cyclic uniaxial compression tests. Similarities with other well-known groups of materials such as crushable foams, crumpled materials and compacted powders have been discussed. A simple 1D phenomenological model has been used to fit the experimental stress-strain curves and the accuracy of the result supports the assumptions that the graphite-like microstructure and the crumpled meso-structure play the major role under out-of-plane uniaxial compression