Influence of Residual Water Traces on the Electrochemical Performance of Hydrophobic Ionic Liquids for Magnesium‐Containing Electrolytes

A trace amount of water is typically unavoidable as an impurity in ionic liquids, which is a huge challenge for their application in Mg-ion batteries. Here, we employed molecular sieves of different pore diameters (3, 4, and 5 Å), to effectively remove the trace amounts of water from 1-methyl-1-propylpiperidinium bis(trifluoromethylsulfonyl)imide (MPPip-TFSI) and 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide (BMP-TFSI). Notably, after sieving (water content <1 mg ⋅ L$^{−1}$), new anodic peaks arise that are attributed to the formation of different anion-cation structures induced by minimizing the influence of hydrogen bonds. Furthermore, electrochemical impedance spectroscopy (EIS) reveals that the electrolyte resistance decreases by ∼10 % for MPPip-TFSI and by ∼28 % for BMP-TFSI after sieving. The electrochemical Mg deposition/dissolution is investigated in MPPip-TFSI/tetraglyme (1 : 1)+100 mM Mg(TFSI)$_2$+10 mM Mg(BH$_4$)$_2$ using Ag/AgCl and Mg reference electrodes. The presence of a trace amount of water leads to a considerable shift of 0.9 V vs. Mg$^{2+}$/Mg in the overpotential of Mg deposition. In contrast, drying of MPPip-TFSI enhances the reversibility of Mg deposition/dissolution and suppresses the passivation of the Mg electrode

Electrodeposition of Zinc onto Au(111) and Au(100) from the Ionic Liquid [MPPip][TFSI]

The improvement of rechargeable zinc/air batteries was a hot topic in recent years. Predominantly, the influence of water and additives on the structure of the Zn deposit and the possible dendrite formation were studied. However, the effect of the surface structure of the underlying substrate was not focused on in detail, yet. We now show the differences in electrochemical deposition of Zn onto Au(111) and Au(100) from the ionic liquid N-methyl-N-propylpiperidinium bis(trifluoromethanesulfonyl)imide. The fundamental processes were initially characterized via cyclic voltammetry and in situ scanning tunnelling microscopy. Bulk deposits were then examined using Auger electron spectroscopy and scanning electron microscopy. Different structures of Zn deposits are observed during the initial stages of electrocrystallisation on both electrodes, which reveals the strong influence of the crystallographic orientation on the metal deposition of zinc on gold

Influence of Chloride and Nitrate Anions on Copper Electrodeposition onto Au(111) from Deep Eutectic Solvents

Copper electrodeposition on Au(111) from deep eutectic solvents (DESs) type III was investigated employing cyclic voltammetry as well as chronoamperometry. It was further examined on Au(poly) using the electrochemical quartz crystal microbalance (EQCM). The employed DESs are mixtures of choline chloride (ChCl) or choline nitrate (ChNO$_{3}$) with ethylene glycol (EG) as hydrogen bond donor (HBD), each in a molar ratio of 1 : 2. CuCl, CuCl$_{2}$, or Cu(NO$_{3}$)$_{2}$ ⋅ 3H$_{2}$O were added as copper sources. Underpotential deposition (UPD) of Cu precedes bulk deposition in chloride as well as nitrate electrolytes. Cu deposition from Cu$^{+}$ in chloride media is observed as a one-electron reaction, whereas deposition from Cu$^{2+}$ occurs in two steps since Cu$^{+}$ is strongly stabilized by chloride. Cu$^{+}$ is less stabilized by nitrate and the beginning of bulk deposition in the nitrate-containing DES with Cu$^{2+}$ is shifted by several hundred mV to more positive potentials compared to the chloride DES. A diffusion-controlled, three-dimensional nucleation and growth mechanism is found by chronoamperometric measurements and analysis based on the model of Scharifker and Mostany

Conjugated Polyimidazole Nanoparticles as Biodegradable Electrode Materials for Organic Batteries

Conjugated polymers are promising active materials for batteries. Batteries not only need to have high energy density but should also combine safe handling with recyclability or biodegradability after reaching their end-of-life. Here, π-conjugated polyimidazole particles are developed, which are prepared using atom economic direct arylation adapted to a dispersion polymerization protocol. The synthesis yields polyimidazole nanoparticles of tunable size and narrow dispersity. In addition, the degree of crosslinking of the polymer particles can be controlled. It is demonstrated that the polyimidazole nanoparticles can be processed together with carbon black and biodegradable carboxymethyl cellulose binder as an active material for organic battery electrodes. Electrochemical characterization shows that a higher degree of crosslinking significantly improves the electrochemical performance and leads to clearer oxidation and reduction signals of the polymer. Polyimidazole as part of the composite electrode shows complete degradation by exposure to composting bacteria over the course of 72 h

Electrodeposition of Cu onto Au(111) from Deep Eutectic Solvents: Molar Ratio of Salt and Hydrogen Bond Donor

The electrodeposition of copper onto Au(111) from Deep Eutectic Solvents (DESs) type III has been studied by cyclic voltammetry. Investigations were carried out with mixtures of choline chloride (ChCl) and ethylene glycol (EG) or trifluoroacetamide (TFA). The eutectic compositions and temperatures were determined by differential scanning calorimetry (DSC). For the ChCl/EG DES, a eutectic ratio of 16 : 84 (ChCl:EG) was found instead of the previously reported ratio of 33 : 67. The electrodeposition of copper was studied for electrolytes with different ratios of ChCl to hydrogen bond donor (HBD) to resolve the influence of the composition on the deposition behavior. Both CuCl and CuCl$_{2}$ were used as Cu salts. Underpotential deposition (UPD) is followed by bulk deposition with the diffusion rate of Cu species being dependent on the ratio of ChCl to HBD. With CuCl$_{2}$, both Cu$^{+}$ and Cu$^{2+}$ species are reduced and deposited, whereby the two-electron reduction is more dominant with higher chloride content and presence of EG. However, the properties of the Cu electrodeposition do not result from the freezing-point depression of the DESs, but from the high concentration of ions