Connecting the global H-mode power threshold to the local radial electric field at ASDEX Upgrade

The relation between the macroscopic input power required at ASDEX Upgrade to access the H-mode Pthr and the microscopic E x B shear has been investigated via fast charge-exchange recombination spectroscopy (CXRS) measurements at various toroidal magnetic fields, different electron densities, and in both hydrogen and deuterium plasmas. For the H-mode onset, a threshold in the v E x B minimum, an approximation of the E x B shear, has been found. This identifies v E x B and not Er as the important player for the L-H transition. A database of measurements including CXRS, Doppler reflectometry measurements and comparison to neoclassical approximations shows a threshold v E x B of (6.7 ± 1.0) km/s ranging over a factor of three in Pthr. Using these findings, a simple derivation of the Pthr scaling is proposed giving a physics interpretation of the Bt, density and surface dependence of Pthr.EUROfusion Consortium Grant Agreement No. 63305

Pedestal and Er profile evolution during an edge localized mode cycle at ASDEX Upgrade

The upgrade of the edge charge exchange recombination spectroscopy diagnostic at ASDEX Upgrade has enabled highly spatially resolved me asurements of the impurity ion dynamics during an edge-localized mode cycle ( ELM ) with unprecedented temp oral resolution, i.e. 65 μ s. The increase of transport during an ELM induces a relaxation of the ion, electron edge gradients in impurity density and fl ows. Detailed characterization of the recovery of the edge temperature gradients reveals a difference in the ion and electron channe l: the maximum ion temperature gradient T i is re-established on similar timescales as n e , which is faster than the recovery of T e .Afterthe clamping of the maximum gradient, T i and T e at the pedestal top continue to rise up to the next ELM while n e stays constant which means that the temperatur e pedestal and the resu lting pedestal pressure widen until the next ELM. The edge radial electric fi eld E r at the ELM crash is found to reduce to typical L-mode values and its ma ximum recovers to its pre-ELM conditions on a similar time scale as for n e and T i . Within the uncertainties, the measurements of E r align with their neoclassical predictions E r,neo for most of the ELM cycle, thus indicating that E r is dominated by collisional processes. However, between 2 and 4 ms af ter the ELM crash, other contributions to E B ́ fl ow, e.g. zonal fl ows or ion orbit effects, could not be excluded within the uncertainties.European Commission (EUROfusion 633053

Dynamics of the pedestal transport during edge localized mode cycles at ASDEX Upgrade

The dynamic behaviour of the ion and electron energy, particle and momentum transport measured during type-I edge localized mode (ELM) cycles at ASDEX Upgrade is presented. Fast measurements of the ion and electron temperature profiles revelead that the ion and electron energy transport recover on different timescales, with the electrons recovering on a slower timescale (Cavedon et al 2017 Plasma Phys. Control. Fusion 59 105007). The dominant mechanism for the additional energy transport in the electron channel that could cause the delay in the electron temperature gradient (VTe) recovery is attributed to the depletion of energy caused by the ELM. The local sources and sinks for the electron channel in the steep gradient region are much smaller compared to the energy flux arriving from the pedestal top, indicating that the core plasma may dictate the local dynamics of the VTe recovery during the ELM cycle. A model for the edge momentum transport based on toroidal torque balance that takes into account the existence of poloidal impurity asymmetries has been developed. The analysis of the profile evolution during the ELM cycle shows that the model captures the dynamics of the rotation both before the ELM crash and during the recovery phase.European Commission (Euratom) Grant agreement No. 633053H2020 Marie-Sklodowska Curie programme (grant agreement No. 708257)European Union’s Horizon 2020 (grant agreement No. 805162

Experimental conditions to suppress edge localised modes by magnetic perturbations in the ASDEX Upgrade tokamak

Access conditions for full suppression of Edge Localised Modes (ELMs) by Magnetic Perturbations (MP) in low density high confinement mode (H-mode) plasmas are studied in the ASDEX Upgrade tokamak. The main empirical requirements for full ELM suppression in our experiments are: 1. The poloidal spectrum of the MP must be aligned for best plasma response from weakly stable kink-modes, which amplify the perturbation, 2. The plasma edge density must be below a critical value, $3.3 \times 10^{19}$~m$^{-3}$. The edge collisionality is in the range $\nu^*_i = 0.15-0.42$ (ions) and $\nu^*_e = 0.15-0.25$ (electrons). However, our data does not show that the edge collisionality is the critical parameter that governs access to ELM suppression. 3. The pedestal pressure must be kept sufficiently low to avoid destabilisation of small ELMs. This requirement implies a systematic reduction of pedestal pressure of typically 30\% compared to unmitigated ELMy H-mode in otherwise similar plasmas. 4. The edge safety factor $q_{95}$ lies within a certain window. Within the range probed so far, $q_{95}=3.5-4.2$, one such window, $q_{95}=3.57-3.95$ has been identified. Within the range of plasma rotation encountered so far, no apparent threshold of plasma rotation for ELM suppression is found. This includes cases with large cross field electron flow in the entire pedestal region, for which two-fluid MHD models predict that the resistive plasma response to the applied MP is shielded

Qualification and implementation of line ratio spectroscopy on helium as plasma edge diagnostic at ASDEX Upgrade

A new thermal helium beam diagnostic has been implemented as plasma edge diagnostic at the ASDEX Upgrade (AUG) tokamak. The helium beam is built to measure the electron density ne and temperature Te simultaneously with high spatial and temporal resolution in order to investigate steady-state as well as fast transport processes in the plasma edge region. For the thermal helium beam emission line ratio spectroscopy, neutral helium is locally injected into the plasma by a piezo valve. This enabled the measurement of the line resolved emission intensities of seven He i lines for different plasma scenarios in AUG. The different line ratios can be used together with a collisional-radiative model (CRM) to reconstruct the underlying electron temperature and density. Ratios from the same spin species are used for the electron density reconstruction, whereas spin mixed ratios are sensitive to electron temperature changes. The different line ratios as well as different CRMs are tested for their suitability for diagnostic applications. Furthermore their consistency in calculating identical parameters is validated and the resulting profiles are compared to other available diagnostics at AUG.EUROfusion Consortium 633053US Department of Energy DE-SC00013911 and DE-SC001421

The role of radial electric field and neoclassical transport in the establishment and sustainment of the edge transport barrier in the ASDEX Upgrade tokamak

EUROfusion Consortium 63305

Inner versus outer E×B shear layer: an attempt to radially localize the L-H transition

EUROfusion Consortium 63305

Investigation of inter-ELM ion heat transport in the H-mode pedestal of ASDEX Upgrade plasmas

The ion heat transport in the pedestal of H-mode plasmas is investigated in various H-mode discharges with different pedestal ion collisionalities. Interpretive modelling suggests that in all analyzed discharges the ion heat diffusivity coefficient, χ i , in the pedestal is close to the neoclassical prediction within the experimental uncertainties. The impact of changing the deposition location of the electron cyclotron resonance heating on the ion heat transport has been studied. The effect on the background profiles is small. The pre-ELM (edge localized modes) edge profiles as well as the behaviour of the electron temperature and density, ion temperature and impurity toroidal rotation during the ELM cycle are very similar in discharges with on- and off-axis ECRH heating. No significant deviation of χ i from neoclassics is observed when changing the ECRH deposition location to the plasma edge.European Commission (EUROfusion 633053)European Union (EUROfusion Grant WP14-FRF-IPP