Bone lengthening using fitbone(r) motorized intramedullary nail: the first experience in France.

INTRODUCTION: Intramedullary limb lengthening systems include mechanical systems (the Albizzia nail and the ISKD nail) as well as motorized systems with the Fitbone(®) (Wittenstein, Igersheim, Germany) and the Precice(®) (Ellipse Technologies, Irvine, CA, USA) nails. We hypothesized that limb lengthening using the Fitbone(®) nail was reliable, reproducible, and comfortable for the patient. PATIENTS AND METHODS: Between 2010 and 2013, a prospective single-center, single-operator (FA) study was conducted on patients who had undergone limb lengthening using the Fitbone(®) nail. The inclusion criteria were length discrepancy of the limbs equal to or greater than 25 mm or a short stature. The exclusion criteria were indications for cosmetic reasons and/or growth plates that were still open. The lengthening parameters were assessed postoperatively and at the last follow-up. Lengthening was considered achieved when the lengthening objective did not differ by more than 5 mm. All complications were noted. A statistical analysis was performed. RESULTS: Twenty-six Fitbone(®) nails were implanted in 23 patients, in the femur in 15 cases and the tibia in 11 cases. The patients' mean age was 22.5 years (range: 15-53 years) and the mean follow-up was 3.4 years (range: 2-5.3 years). The limb lengthening targeted was obtained in 23 cases (88%) and the mean lengthening was 45.3±18 mm (range: 20-80 mm). The mean time to healing was 277±167 days (range: 86-638 days). The mean healing index was 73±57 days/cm for the femurs and 83.5±65 days/cm for the tibias. The mean complication rate was 15.4%. DISCUSSION: This study emphasizes the good short-term results of this motorized intramedullary lengthening system. An evaluation over the longer term and with a higher number of patients remains necessary. LEVEL OF EVIDENCE: IV: uncontrolled, prospective, continuous study

Biomechanical study of ACL reconstruction grafts

There are no published studies describing the strength quadrupled gracilis tendon alone and quadrupled semitendinosus tendon alone in the configuration used for anterior cruciate ligament (ACL) reconstruction. The primary objective was to compare the mechanical properties of grafts used for ACL reconstruction during a tensile failure test. The secondary objective was to evaluate the effect of uniform suturing on graft strength. Fifteen pairs of knees were used. The mechanical properties of five types of ACL grafts were evaluated: patellar tendon (PT), sutured patellar tendon (sPT), both hamstring tendons (GST4), quadrupled semitendinosus (ST4), and quadrupled gracilis (G4). Validated methods were used to perform the tensile tests to failure and to record the results. Student's t-test was used to compare the various samples. The maximum load to failure was 630.8N (± 239.1) for the ST4, 473.5N (± 176.9) for the GST4, 413.3N (± 120.4) for the sPT, and 416.4N (± 187.7) for the G4 construct. Only the ST4 had a significantly higher failure load than the other grafts. The sPT had a higher failure load than the PT. The ST4 construct had the highest maximum load to failure of all the ACL graft types in the testing performed here. Uniform suturing of the grafts improved their ability to withstand tensile loading

Cadaveric study comparing the biomechanical properties of grafts used for knee anterolateral ligament reconstruction

Purpose: To measure the biomechanical properties (maximum load, stiffness, and elongation) of the anterolateral ligament (ALL), gracilis, and iliotibial band (ITB) within the same subject. METHODS: Thirteen unpaired knees were used (7 women, 6 men). The donors had a mean age at death of 54 years (range: 37 to 70 years). The mechanical properties of two types of ALL grafts were evaluated: ITB and two-strand gracilis. The mechanical properties of ALL were also measured. Validated methods were used to perform the tensile tests to failure and to record the results. Student's t-test was used to compare the various samples. RESULTS: The maximum load to failure was 141 N (±40.6) for the ALL, 200.7 N (±48.7) for the gracilis, and 161.1 N (±27.1) for the ITB. Only the gracilis had a significantly higher failure load than ITB and ALL (P = .001 and P = .03). The stiffness was 21 N mm-1 (±8.2) for the ALL, 131.7 N mm-1 (±43.7) for the gracilis, and 39.9 N mm-1 (±6) for the ITB. The elongation at failure was 6.2 mm (±3.2) for the ALL, 19.9 mm (±6.5) for the gracilis, and 20.8 mm (±14.7) for the ITB. CONCLUSIONS: The gracilis had the highest maximum load to failure. The ITB's mechanical properties most closely resemble those of the ALL. CLINICAL RELEVANCE: The biomechanical properties of each potential ALL graft can be factored in when deciding which type of graft to use

Triple osteotomy of the pelvis for Legg-Calve-Perthes disease: a mean fifteen year follow-up.

PURPOSE: This study presents the results of a prospective consecutive cohort of patients with Legg-Calvé-Perthes disease (LCPD) operated with triple osteotomy of the pelvis (TOP) between 1989 and 2005. We attempted to determine whether the results of TOP remain stable with time and consequently lower the risk of subsequent osteoarthritis. The primary study aims were to determine the maintenance of head coverage and joint congruity, and functional outcomes of this surgery. METHODS: Forty-five patients with a mean follow-up of 15.2 years (range eight to 24) were included. RESULTS: At latest follow-up, two patients were lost to follow-up, and two required a surgical reoperation. Cumulative maintenance of head coverage and joint congruity rate for all TOP was 84.6 % (95 % CI: 82.3-90.6 %) at 15 years. Factors significantly associated with poor long-term results were the age at diagnosis and Greene index. CONCLUSION: TOP in LCPD provides satisfactory and reproducible long-term clinical results

Can the gracilis replace the anterior cruciate ligament in the knee? A biomechanical study

Purpose The purpose of this study was to determine whether a four-strand gracilis-only construct possesses the biomechanical properties needed to act as an anterior cruciate ligament (ACL) reconstruction graft. Methods This was a pilot study with 32 cadaver specimens. The biomechanical properties of three types of grafts were determined using validated tensile testing methods: patellar tendon (BTB), both hamstring tendons together (GST4) and gracilis alone (G4). Results The maximum load at failure of the G4 was 416.4 N (±187.7). The GST4 and BTB had a maximum load at failure of 473.5 N (±176.9) and 413.3 N (±120.4), respectively. The three groups had similar mean maximum load and stiffness values. The patellar tendon had significantly less elongation at failure than the other two graft types. Conclusions The biomechanical properties of a four-strand gracilis construct are comparable to the ones of standard grafts. This type of graft would be useful in the reconstruction of the anteromedial bundle in patients with partial ACL ruptures

Is the prognosis the same for periprosthetic joint infections due to Staphylococcus aureus versus coagulase-negative staphylococci? A retrospective study of 101 patients with 2-year minimum follow-up.

BACKGROUND: Staphylococcus aureus (SA) and Coagulase-negative staphylococci (CoNS) are often responsible for infections of total hip arthroplasty (THA) and total knee arthroplasty (TKA). One of the main differences between these two microorganisms is their virulence, with SA presumed to be more virulent; however, few studies have specifically investigated the impact of this virulence. This inspired us to carry out a retrospective study to evaluate whether the healing rate differed between SA and CoNS infections. HYPOTHESIS: We hypothesised that the healing rate is lower for SA prosthetic joint infections. MATERIALS AND METHODS: This was a retrospective study of 101 consecutive Staphylococcus infection cases that occurred between 2007 and 2011. There were 56 men and 45 women with an average age of 69 years (range 23-95). The infection was associated with TKA in 38 cases and THA in 63 cases. Thirty-two percent of patients had one or more comorbidities with infectious potential. In our cohort, there were 32 SA infections (31.7 %) and 69 CoNS infections (68.3 %) with 58 of the infections being methicillin-resistant (15 SA and 43 CoNS); there were 27 polymicrobial infections (26.7 %). RESULTS: With a minimum 24-month follow-up after the end of antibiotic treatment, the healing rate was 70.3 % overall (71 patients). The healing rate was 75 % in the SA group (24 patients) versus 68.1 % (47 patients) in the CoNS group (P = 0.42). CONCLUSION: Our hypothesis was not confirmed: the healing rate of SA prosthetic joint infections was not lower than that of CoNS infections. LEVEL OF EVIDENCE: III, retrospective case-control study

Results of non-operative treatment of olecranon fracture in over 75-year-olds

INTRODUCTION: Surgery is the gold-standard treatment of displaced olecranon fracture, but is associated with numerous complications, especially in the elderly. Functional results of non-operative treatment in this population have never been analyzed in a prospective study. STUDY HYPOTHESIS: Non-operative treatment of isolated olecranon fracture with stable elbow-joint in over 75-year-olds gives functional results comparable to those of surgery as reported in the literature, with fewer complications. MATERIAL AND METHODS: A prospective study analyzed functional results of non-operative treatment of isolated closed Mayo I and II olecranon fracture with stable elbow, in patients aged ≥75 years. The principal assessment criterion was functional recovery on the Mayo Elbow Performance Score (MEPS) and QuickDASH at 6 months. RESULTS: Twenty-two fractures in 21 patients were included. Mean MEPS was 95.26/100 (range, 85-100), and mean QuickDASH 4.3 (range, 0-29.55). Eighteen fractures showed osteoarthritis of the olecranon. There were no cases of elbow instability. There were no complications. DISCUSSION: Non-operative treatment of olecranon fracture in patients aged ≥75 years provided excellent functional results at 6 months, without associated complications. TYPE OF STUDY: Single-center prospective observation cohort study

Cryotherapy With Dynamic Intermittent Compression Improves Recovery From Revision Total Knee Arthroplasty

BACKGROUND: The goal of this study was to assess the efficacy of cryotherapy with dynamic intermittent compression (CDIC) in relieving postoperative pain, decreasing blood loss, and improving functional scores after revision total knee arthroplasty (rTKA). METHODS: We conducted a prospective case-control study (level of evidence: I) to evaluate the efficacy of CDIC on postoperative bleeding, pain, and functional outcomes after rTKA. Forty-three cases were included at a single institution and divided in 2 groups: a control group without CDIC (n = 19) and an experimental group with CDIC (n = 24). Bleeding was evaluated by calculating total blood loss, pain at rest was evaluated with a visual analog scale on postoperative day 3, and function was assessed using the Oxford score at 6 months postoperatively. The comparative analysis was performed using the Fisher exact test. RESULTS: The CDIC group had significantly lower total blood loss (260 vs 465 mL; P < .05), significantly less pain on day 3 (1 vs 3; P < .05), and a significantly higher functional score (42 vs 40; P < .05) than the control group. CONCLUSION: This is the first report dealing with the use of CDIC after rTKA. According to our results, it improves the recovery of patients who underwent rTKA; thus, it should be integrated into our daily practice

Proximal femoral fractures in centenarians. A retrospective analysis of 39 patients

BACKGROUND: A corollary of the current population ageing in France is an increase in proximal femoral fractures (PFFs), particularly among centenarians. The outcomes of PFFs in centenarians in France are unknown. We therefore conducted a retrospective study of centenarians with PFFs both to assess: (1) assess clinical outcomes according to geriatric and trauma scores, (2) and to determine whether routine surgery is warranted. HYPOTHESIS: Morbidity and mortality in a single-centre cohort of centenarians with surgically treated PFFs are consistent with previous reports. MATERIAL AND METHOD: We retrospectively reviewed the data of 33 women and 6 men aged 100 years or over who were treated surgically for PFFs at a single-centre between 2008 and 2014. Of the 39 patients, 15 were living at home and 24 in an institution at the time of the injury. Mean (range) values were 3.30 (0-7) for the Parker Mobility Score, 5.84 (0-12) for the Katz index, and 7.46 (2-12) for the Mini Nutritional Assessment (MNA). Mean time from injury to surgery was 1.7 days (0-12). The 26 extra-capsular fractures were managed by internal fixation and the 13 intra-capsular fractures by hip arthroplasty (n=12) or screw fixation (n=1). RESULTS: After a mean follow-up of 23±14 months (6-60 months), 29 patients had died, including 3 within 48h, 10 within 3 months, and 15 within 1 year. Sequential mortality rates were 33.3% within the first 3 months, 26.9% from months 4 to 9, and 42.2% within the first year. Early dislocation occurred in 3 patients and surgical-site infection in 2 patients. Other complications were heart failure (n=1), confusional state (n=2), pneumonia (n=2), and pyelonephritis (n=2). DISCUSSION: A PubMed search identified five studies of PFFs in more than 10 centenarians, of which only 2 provided detailed information on postoperative general and local morbidity related to the surgical treatment. Our hypothesis was confirmed for 3-month and 1-year mortality rates, which were at the lower ends of previously reported ranges. Local complications related directly to surgery were considerably more common in our study. PFFs in centenarians carry a high risk of death. Despite the absence of a control group, our data support surgery as the best treatment option. LEVEL OF EVIDENCE: IV, retrospective study

Etude de la variabilité en fonction du sexe, de l'âge et de l'origine géographique de l'extrémité distale du fémur

The shape of human bones varies based on age, sex and ethnicity. This variability in human anatomy can be used to determine a person's age, sex and ethnicity. Historically, the tools used for such analyses are osteometric methods (length, angle, length ratio) that can be plagued by analysis or interpretation biases. Three-dimensional geometric morphometric analysis (3D GM) can limit the impact of these biases. It is used to describe and compare the general shape of one or more objects by eliminating any size-related effects. To the best of our knowledge, this method has never been used to analyse the sexual dimorphism, ethnicity-related and age-related differences in the distal femur. The femur is one of the longest human bones and is often well preserved in human remains. The goal of this study was to demonstrate differences in the shape of the distal femur according to age, sex and ethnicity using GM. We carried out 3D GM on 482 CT scans of the distal femur of adults living in the South of France and in the Chongqing region of China. Subjects with bone or joint pathologies were excluded. Ten landmarks were defined on 3D reconstructions of the distal femur. A standard osteometric analysis was performed in addition to the GM analysis to evaluate the plausibility of our results. The data were analysed by two observers at two different times. This allowed us to calculate the inter- and intra-observer variability for each landmark. The chosen landmarks were used to characterise the shape of the distal femur. The first step consisted of a generalized Procrustes analysis (GPA). The landmarks' coordinates in space were analysed using a principal component analysis (PCA). A discriminant analysis was performed to determine the percentage of cases in which the sex, age or ethnicity was correctly estimated. The GPA found a statistically significant difference in the distal femur shape between different sexes, ethnicity groups and age groups. The PCA found that age, sex and ethnicity accounted for 54.4%, 58.6% and 61.9% of the observed variability in distal femur shape, respectively. Using this method, 80% of cases were assigned the correct age, 77.3% the correct sex and 82% the correct ethnic group. The results of the osteometric analysis were comparable to published values. The percentage error for the intra- and interobserver comparisons for all the landmarks was always less than 2%. In this study, MG analysis of the distal femur revealed age-related, sex-related and ethnicity-related variability in the distal femur. The high reproducibility and plausibility of our results validate our methodology. These shape differences have direct implications for anthropobiology and also orthopaedics. Although this method is not sufficiently accurate to be used alone, it has the advantage of being usable in the context of virtual or in vivo autopsy cases. Moreover, this study has updated the morphometric data for a modern population in the south of France and the Chongqing region of China. This reliable and accurate methodology can be used to perform diachronic and interethnic comparisons. Validation of this medical imaging modality opens new avenues in physical anthropology research. In the orthopaedics field, this variability means that the shape of implants used for knee arthroplasty should be re-assessed regularly and brings into question the need for gender-specific or ethnicity-specific implants.La morphologie des os humains varie en fonction du sexe, de l'âge et de l'ethnie. Cette variabilité de l'anatomie humaine peut aider à déterminer le sexe, l'âge et l'ethnie. Les outils utilisés pour de telles analyses sont classiquement des méthodes ostéométriques (longueur, angle, rapport de longueur) qui peuvent être sujettes à des biais d'analyse ou d'interprétation. L'analyse morphométrique géométrique 3D (MG) permet de limiter ces biais. Elle étudie et compare la forme d'un ou plusieurs objets en éliminant les effets liés à la taille de celui-ci. Nous n'avons pas retrouvé d'analyse du dimorphisme sexuel, ethnique et lié à l'âge de l'extrémité distale du fémur à l'aide de cette méthode. Le fémur est pourtant un des plus gros os du corps et il est souvent bien conservé dans les restes humains. L'objectif de ce travail était de montrer qu'il existe une différence de forme du fémur distal en fonction de l'âge, du sexe et de l'ethnie visualisable grâce à MG. Nous avons réalisé une MG de 482 scanners d'extrémité distale de fémur de sujets vivant dans le sud de la France et dans la région de Chongqing (chine). Les sujets présentant une pathologie osseuse ou articulaires ont été exclus. Dix landmarks ont été positionnés sur des reconstructions tridimentionelles. Nous avons également réalisé une analyse ostéométrique " classique " en plus de MG afin d'évaluer la vraisemblance de nos résultats. Les données ont été analysées par deux observateurs à deux temps différents. Nous avons calculé pour chaque landmark la variabilité inter et intraobservateur. Les landmarks choisis permettaient de caractériser la forme de l'extrémité distale du fémur. La première étape a consisté en la réalisation d'une analyse généralisée procrustre (GPA). Les coordonnées dans l'espace des landmarks ont été analysées en utilisant une analyse en composant principal (PCA). Une analyse discriminante a permis de vérifier le pourcentage de cas dans lequel le sexe, l'âge ou l'ethnie estimés étaient les bons. GPA retrouve une différence de forme statistiquement significative entre les sexes, en fonction de l'âge et entre les ethnies. PCA retrouve une différence de forme en fonction de l'âge, du sexe ou de l'ethnie qui représente respectivement 54,4 ;58,6 et 61,9% de la variabilité observée. Les taux d'assignement correct avec cette méthode étaient de 80% (âge) ; 77,3% (sexe) et 82 % (l'ethnie). L'analyse ostéométrique " classique " retrouvait des valeurs comparables à celles retrouvées dans la littérature. Le pourcentage d'erreur intra et inter observateur pour l'ensemble des landmarks n'excédait jamais 2%. Nous avons démontré que l'analyse MG du fémur distal permettait de mettre en évidence une variabilité en fonction du sexe, de l'âge et de l'ethnie de ce segment osseux. La reproductibilité élevée et la vraisemblance des résultats valident notre méthodologie. Cette différence de forme a des retombées directes en anthropobiologie mais aussi en orthopédie. Cette méthode d'assignation ne donne pas de résultats suffisamment précis pour être utilisée seule. Cependant, elle a l'avantage de pouvoir être utilisée dans des contextes d'autopsie virtuelle ou in vivo. Par ailleurs, par la présente étude nous réactualisons les données morphométriques de population contemporaine du sud de la France et aussi de la région de Chongqing en chine. Cette méthodologie adéquate et reproductible va permettre de réaliser des comparaisons diachroniques ainsi qu'inter ethnique. La validation de l'utilisation d'examen d'imagerie médicaux ouvre un champ nouveau en anthropologie physique. En ce qui concerne l'aspect orthopédique, cette variabilité questionne sur la nécessité ou non d'implant spécifique et surtout sur la nécessité de réévaluer de manière régulière la forme des prothèses de genou