1,372 research outputs found
General practice registrars’ intentions for future practice: Implications for rural medical workforce planning
The models of practice that general practice registrars (GPRs) envisage undertaking will affect workforce supply. The aim of this research was to determine practice intentions of current GPRs in a regional general practice training program (Coast City Country General Practice Training). Questionnaires were circulated to 220 GPRs undertaking general practice placements to determine characteristics of ideal practice models and intentions for future practice. Responses were received for 99 participants (45%). Current GPRs intend to work an average of less than eight half-day sessions/week, with male participants intending to work more hours (t(91) = 3.528, P = 0.001). More than one-third of this regional cohort intends to practice in metropolitan centres. Proximity to family and friends was the most important factor influencing the choice of practice location. Men ranked remuneration for work as more important (t (88) = –4.280, P \u3c 0.001) and women ranked the ability to work part-time higher (t(94) = 3.697, P \u3c 0.001). Fee-for-service payment alone, or in combination with capitation, was the preferred payment system. Only 22% of Australian medical graduates intend to own their own practice compared with 52% of international medical graduates (χ2(1) = 8.498, P = 0.004). Future general practitioners (GPs) intend to work fewer hours than current GPs. Assumptions about lifestyle factors, practice models and possible professional roles should be carefully evaluated when developing strategies to recruit GPs and GPRs into rural practice
High fidelity imaging and high performance computing in nonlinear EIT
We show that nonlinear EIT provides images with well defined characteristics when smoothness of the image is used as a constraint in the reconstruction process. We use the gradient of the logarithm of resistivity as an effective measure of image smoothness, which has the advantage that resistivity and conductivity are treated with equal weight. We suggest that a measure of the fidelity of the image to the object requires the explicit definition and application of such a constraint. The algorithm is applied to the simulation of intra-ventricular haemorrhaging (IVH) in a simple head model. The results indicate that a 5% increase in the blood content of the ventricles would be easily detectable with the noise performance of contemporary instrumentation. The possible implementation of the algorithm in real time via high performance computing is discussed
Phase and coherence analysis of VHF scintillation over Christmas Island
This short paper presents phase and coherence data from the cross-wavelet
transform applied on longitudinally separated very high frequency (VHF) equatorial ionospheric
scintillation observations over Christmas Island. The phase and coherence
analyses were employed on a pair of scintillation observations, namely, the
east-looking and west-looking VHF scintillation monitors at Christmas Island.
Our analysis includes 3 years of peak season scintillation data from
2008, 2009 (low solar activity), and 2011 (moderate solar activity). In
statistically significant and high spectral coherence regions of the
cross-wavelet transform, scintillation observations from the east-looking
monitor lead those from the west-looking monitor by about 20 to 60 (40 ±
20) min (most frequent lead times). Using several years (seasons and
solar cycle) of lead (or lag) and coherence information of the cross-wavelet
transform, we envisage construction of a probability model for forecasting
scintillation in the nighttime equatorial ionosphere
The Burden of Motherhood: The Effect of Reproductive Load on Female Lizard Locomotor, Foraging, and Social Behavior
The costs of reproduction, involving demands associated with both current and future reproductive efforts, may place a substantial burden on females. However, animals may minimize these costs by modifying their behavior across the reproductive cycle. We examined the effects of reproductive load on three types of behavior (locomotion, foraging, and social displays) in green anole lizards (Anolis carolinensis) by comparing egg, follicle, and oviduct mass and volume with field observational data. We found that female locomotor and social display behaviors decreased as reproductive load increased, suggesting behavioral modification in these traits, but we detected no relationship between foraging and reproductive load. We also examined these relationships across eight Anolis species using a phylogenetically informed analysis and found no associations between the evolution of reproductive load and any of the three behaviors. These results suggest that the evolution of increased reproductive load is not associated with the interspecific variation in behavior across the anoles and may result from varying life history traits or selective ecological pressures across species
Recommended from our members
Coal-water slurry atomization characteristics
The overall objective of this work was to fully characterize the CWS fuel sprays of a medium-speed diesel engine injection system. Specifically, the spray plume penetration as a function of time was determined for a positive-displacement fuel injection system. The penetration was determined as a function of orifice diameter, coal loading, gas density in the engine, and fuel line pressure. Preliminary droplet information also was obtained. The results of this study will assist CWS engine development by providing much needed insight about the fuel spray. In addition, the results will aid the development and use of CWS engine cycle simulations which require information on the fuel spray characteristics
Scaling and root planing with and without periodontal flap surgery
. Complete removal of calculus is a primary part of achieving a “biologically acceptable” tooth surface in the treatment of periodontitis. Rabbani et al. reported that a single episode of scaling did not completely remove subgingival calculus and that the deeper the periodontal pocket, the less complete the calculus removal. The purpose of the present study was to evaluate the effectiveness of scaling relative to calculus removal following reflection of a periodontal flap. Each of 21 patients who required multiple extractions had 2 teeth scaled, 2 teeth scaled following the reflection of a periodontal flap, and 2 teeth serve as controls. Local anesthesia was used. Following extraction, the % of subgingival tooth surfaces free of calculus was determined using the method described by Rabbani with a stereomicroscope. Results showed that while scaling only (SO) and scaling with a flap (SF) increased the % of root surface without calculus, scaling following the reflection of a flap aided calculus removal in pockets 4 mm and deeper. Comparison of SO versus SF at various pocket depths for % of tooth surfaces completely free of calculus showed 1 to 3 mm pockets to be 86% versus 86%, 4 to 6 mm pockets to be 43% versus 76% and >6 mm pockets to be 32% versus 50%. The extent of residual calculus was directly related to pocket depth, was greater following scaling only, and was greatest at the CEJ or in association with grooves, fossae or furcations. No differences were noted between anterior and posterior teeth or between different tooth surfaces.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/73823/1/j.1600-051X.1986.tb01461.x.pd
Signatures of the disk-jet coupling in the Broad-line Radio Quasar 4C+74.26
Here we explore the disk-jet connection in the broad-line radio quasar
4C+74.26, utilizing the results of the multiwavelength monitoring of the
source. The target is unique in that its radiative output at radio wavelengths
is dominated by a moderately-beamed nuclear jet, at optical frequencies by the
accretion disk, and in the hard X-ray range by the disk corona. Our analysis
reveals a correlation (local and global significance of 96\% and 98\%,
respectively) between the optical and radio bands, with the disk lagging behind
the jet by days. We discuss the possible explanation for this,
speculating that the observed disk and the jet flux changes are generated by
magnetic fluctuations originating within the innermost parts of a truncated
disk, and that the lag is related to a delayed radiative response of the disk
when compared with the propagation timescale of magnetic perturbations along
relativistic outflow. This scenario is supported by the re-analysis of the
NuSTAR data, modelled in terms of a relativistic reflection from the disk
illuminated by the coronal emission, which returns the inner disk radius
. We discuss the global energetics in
the system, arguing that while the accretion proceeds at the Eddington rate,
with the accretion-related bolometric luminosity erg s , the jet total kinetic energy
erg s, inferred from the dynamical
modelling of the giant radio lobes in the source, constitutes only a small
fraction of the available accretion power.Comment: 9 pages and 6 figures, ApJ accepte
Recommended from our members
Coal-water slurry spray characteristics of a positive displacement fuel injection system
Experiments have been completed to characterized coal-water slurry sprays from a modified positive displacement fuel injection system of a diesel engine. The injection system includes an injection jerk pump driven by an electric motor, a specially designed diaphragm to separate the abrasive coal from the pump, and a single-hole fuel nozzle. The sprays were injected into a pressurized chamber equipped with windows. High speed movies and instantaneous fuel line pressures were obtained. For injection pressures of order 30 MPa or higher, the sprays were similar for coal-water slurry, diesel fuel and water. The time until the center core of the spray broke-up (break-up time) was determined from both the movies and from a model using the fuel line pressures. Results from these two independent procedures were in good agreement. For the base conditions, the break-up time was 0.58 and 0.50 ms for coal-water slurry and diesel fuel, respectively. The break-up times increased with increasing nozzle orifice size and with decreasing chamber density. The break-up time was not a function of coal loading for coal loadings up to 53%. Cone angles of the sprays were dependent on the operating conditions and fluid, as well as on the time and location of the measurement. For one set of cases studied, the time-averaged cone angle was 15.9{degree} and 16.3{degree} for coal-water slurry and diesel fuel, respectively
- …