Heat to electricity thermoacoustic-magnetohydrodynamic conversion

In this work, a new concept for the conversion of heat into electricity is presented. The conversion is based on the combined effects of a thermoacoustic prime mover coupled with a magnetohydrodynamic generator, using different working fluids in each process. The results of preliminary experiments are also presented.Comment: Short article, 5 figures, 5 page

The self-stimulated capillary jet

Inspired by a Savart’s pioneering work, we study the self-stimulated dynamics of a capillary jet. The feedback loop is realised by extracting surface perturbations from a section of the jet itself via a laser–photodiode pair, whose amplified signal drives an electromechanical actuator which, in turn, produces pressure perturbations at the exit chamber. Under specific conditions, this loop establishes phase-locked stimulation regimes that overcome the otherwise random natural breakup. For each laser position along the jet, the gain of the amplifier acts as a selector across a discrete set of observable frequencies. The main observed features are explained by a linear theory which combines the transfer function of each stage in the loop. Our findings are relevant to continuous inkjet technologies for the production of equally sized droplets

A simple levitated-drop tensiometer

A reliable, simple, and affordable liquid tensiometer is presented in this paper. The instrument consists of 72 ultrasonic transmitters in a tractor beam configuration that levitates small liquid samples (droplets) in air. Under operation, the instrument imparts a pressure instability that causes the droplet to vibrate while still levitating. Droplet oscillations are then detected by a photodiode, and the signal is recorded by an oscilloscope. The frequency of these oscillations is obtained and then used to obtain the effective surface tension of the sample. The instrument operates at the millisecond scale time (t < 12.5 ms), with very small liquid volumes (∼0.5 μl), and the sample is recoverable after testing. The instrument has been experimentally validated with acetone, ethanol, Fluorinert FC-40, water, and whole milk

An adaptive solver for viscoelastic incompressible two-phase problems applied to the study of the splashing of slightly viscoelastic droplets

We propose an adaptive numerical solver for the study of viscoelastic 2D two-phase flows using the volume-of-fluid method. The scheme uses the robust log conformation tensor technique of Fattal & Kupferman (2004,2005} combined with the time-split scheme proposed by Hao & Pan (2007}. The use of this time-split scheme has been proven to increase the stability of the numerical computation of two-phase flows. We show that the adaptive computational technique can be used to simulate viscoelastic flows efficiently. The solver is coded using the open-source libraries provided by the \basilisk \cite{Basilisk} platform. In particular, the method is implemented for Oldroyd-B type viscoelastic fluids and related models (FENE-P and FENE-CR). The numerical scheme is then used to study the splashing of weakly viscoelastic drops. The solvers and tests of this work are freely available on the Basilisk web sit

Dynamics of wrinkling in ultrathin elastic sheets

The wrinkling of thin elastic objects provides a means of generating regular patterning at small scales in applications ranging from photovoltaics to microfluidic devices. Static wrinkle patterns are known to be governed by an energetic balance between the object's bending stiffness and an effective substrate stiffness, which may originate from a true substrate stiffness or from tension and curvature along the wrinkles. Here we investigate dynamic wrinkling, induced by the impact of a solid sphere onto an ultra-thin polymer sheet floating on water. The vertical deflection of the sheet's centre induced by impact draws material radially inwards, resulting in an azimuthal compression that is relieved by the wrinkling of the entire sheet. We show that this wrinkling is truly dynamic, exhibiting features that are qualitatively different to those seen in quasi-static wrinkling experiments. Moreover, we show that the wrinkles coarsen dynamically because of the inhibiting effect of the fluid inertia. This dynamic coarsening can be understood heuristically as the result of a dynamic stiffness, which dominates the static stiffnesses reported thus far, and allows new controls of wrinkle wavelength.Comment: 8 pages, 4 figures. Please see published version for supplementary movies and SI Appendi

Novel designs for Penning ion traps

We present a number of alternative designs for Penning ion traps suitable for quantum information processing (QIP) applications with atomic ions. The first trap design is a simple array of long straight wires which allows easy optical access. A prototype of this trap has been built to trap Ca+ and a simple electronic detection scheme has been employed to demonstrate the operation of the trap. Another trap design consists of a conducting plate with a hole in it situated above a continuous conducting plane. The final trap design is based on an array of pad electrodes. Although this trap design lacks the open geometry of the traps described above, the pad design may prove useful in a hybrid scheme in which information processing and qubit storage take place in different types of trap. The behaviour of the pad traps is simulated numerically and techniques for moving ions rapidly between traps are discussed. Future experiments with these various designs are discussed. All of the designs lend themselves to the construction of multiple trap arrays, as required for scalable ion trap QIP.Comment: 11 pages, 10 figure

Electrophoretic molecular communication with piecewise constant electric field

This paper studies a novel electrophoretic molecular communication (EMC) framework utilizing a piecewise constant electric field. EMC is a particular type of molecular communication that exploits electric fields to induce the movement of charged particles to enhance communication performance. Our previous work proposed an EMC framework utilizing a time-varying electric field that exponentially changes; however, the field with such a complicated shape might be challenging to be implemented in practice. Thus, this paper proposes a new EMC approach exploiting a piecewise constant electric field that can be readily implemented via, e.g., an on/off switch method. We formulate two optimization problems to design the electric field based on different objectives: minimizing a mean squared error and minimizing a bit interval. The solutions of each, such as optimal on-off timings and corresponding strengths of the constant electric fields, are obtained through the Lagrange multiplier approach and the geometric programming, respectively. The Monte Carlo simulation results verify that the proposed piecewise constant electric field significantly reduces the bit error rate relative to the constant field benchmark while performing less well, but not significantly, than the exponential field benchmark

Three dimensional ink-jet printing of biomaterials using ionic liquids and co-solvents

1-Ethyl-3-methylimidazolium acetate ([C2C1Im][OAc]) and 1-butyl-3-methylimidazolium acetate ([C4C1Im][OAc]) have been used as solvents for the dissolution and ink-jet printing of cellulose from 1.0 to 4.8 wt%, mixed with the co-solvents 1-butanol and DMSO. 1-Butanol and DMSO were used as rheological modifiers to ensure consistent printing, with DMSO in the range of 41–47 wt% producing samples within the printable range of a DIMATIX print-head used (printability parameter < 10) at 55 °C, whilst maintaining cellulose solubility. Regeneration of cellulose from printed samples using water was demonstrated, with the resulting structural changes to the cellulose sample assessed by scanning electron microscopy (SEM) and white light interferometry (WLI). These results indicate the potential of biorenewable materials to be used in the 3D additive manufacture process to generate single-component and composite materials