Properties of a new poly-ether-glycol copolymer.

Triblock copolymers are made of monomer segments, being the central part usually hydrophobic and the outer parts hydrophilic. By varying sizes, molecular weights and monomer types of the segments one obtains different final molecules, with different physico-chemical properties, which are directly related to the performance of the final product. Looking for new products to be used, among other possibilities, in biological applications, a new polymer (Figure 1) was synthesized by the Dow Chemical and studied by Size Exclusion Chromatography, Fourier Transformed Infrared Spectrometry, Small-angle X-ray Scattering (SAXS) and its cloud point was determined by measuring light transmittance. The studies showed low molecular polydispersivety, but different polarities in the macromolecules fractions. Due to the low solubility of Diol in water, a mixture of water/butyl diglycol was used as solvent. An extensive analysis by SAXS was performed for concentrations from 50 wt% to 80 wt% of Diol in solution. Small concentrations showed very low signal to noise ratio, making it impossible to be analysed. The scattering intensity including the form factor of polydisperse non-homogeneous spheres, and the structure factor of interacting hard spheres was fitted to the curves. As the polymer concentration is high, the fitting of form factors of direct and reverse micelles were compared. The results for direct micelles were better up to 80 wt%, whereas at 90 wt% and 95 wt% the curves were better fitted by reverse micelles. It might seem odd that direct micelles are present up to such high concentrations, but it might have been caused by the presence of butyl diglycol, which increases the solubility of Diol in water. The inner and outer radius of the micelles, electron density distribution, and interaction radius of the micelles were obtained. The polydispersivety increases with Diol concentration. Besides, the interaction radius increases with solvent concentration, even when reversed micelles are present. In the last case, accompanied by an increase of inner radius (water content), as there are fewer Diol molecules to involve the water nuclei, which become larger, further apart, and in less number

Using crystallography tools to improve vaccine formulations

This article summarizes developments attained in oral vaccine formulations based on the encapsulation of antigen proteins inside porous silica matrices.These vaccine vehicles show great efficacy in protecting the proteins from the harsh acidic stomach medium, allowing the Peyer s patches in the small intestine to be reached and consequently enhancing immunity. Focusing on the pioneering research conducted at the Butantan Institute in Brazil, the optimization of the antigen encapsulation yield is reported, as well as their distribution inside the meso and macroporous network of the porous silica. As the development of vaccines requires proper inclusion of antigens in the antibody cells, X ray crystallography is one of the most commonly used techniques to unveil the structure of antibody combining sites with protein antigens. Thus structural characterization and modelling of pure antigen structures, showing different dimensions, as well as their complexes, such as silica with encapsulated hepatitis B virus like particles and diphtheria anatoxin, were performed using small angle X ray scattering, X ray absorption spectroscopy, X ray phase contrast tomography, and neutron and X ray imaging. By combining crystallography with dynamic light scattering and transmission electron microscopy, a clearer picture of the proposed vaccine complexes is shown. Additionally, the stability of the immunogenic complex at different pH values and temperatures was checked and the efficacy of the proposed oral immunogenic complex was demonstrated. The latter was obtained by comparing the antibodies in mice with variable high and low antibody response

Retention at room temperature of the tetragonal t ``-form in Sc(2)O(3)-doped ZrO(2) nanopowders

Synchrotron X-ray powder diffraction was applied to the study of the effect of crystallite size on the crystal structure of ZrO(2)-10 mol% Sc(2)O(3) nanopowders synthesized by a nitrate-lysine gel-combustion route Nanopowders with different average crystallite sizes were obtained by calcination at several temperatures, ranging from 650 to 1200 degrees C The metastable t""-form of the tetragonal phase, exhibiting a cubic unit cell and tetragonal P4(2)/nmc spatial symmetry, was retained at room temperature in fine nanocrystalline powders, completely avoiding the presence of the stable rhombohedral beta phase. Differently, this phase was identified in samples calcined at high temperatures and its content increased with increasing crystallite size The critical maximum crystallite size for the retention of the mestastable t""-form resulted of about 35 nm (C) 2009 Elsevier B.V All rights reserve

Metastable Phase Diagram of Nanocrystalline ZrO(2)-Sc(2)O(3) Solid Solutions

We have investigated the crystal structures and phase transitions of nanocrystalline ZrO(2)-1 to -13 mol % Sc(2)O(3) by synchrotron X-ray powder diffraction and Raman spectroscopy. ZrO(2)-Sc(2)O(3) nanopowders were synthesized by using a stoichiometric nitrate-lysine get-combustion route. Calcination processes at 650 and at 850 degrees C yielded nanocrystalline materials with average crystallite sizes of (10 +/- 1) and (25 +/- 2) nm, respectively. Only metastable tetragonal forms and the cubic phase were identified, whereas the stable monoclinic and rhombohedral phases were not detected in the compositional range analyzed in this work. Differently from the results of investigations reported in the literature for ZrO(2)-Sc(2)O(3) materials with large crystallite sizes, this study demonstrates that, if the crystallite sizes are small enough (in the nanometric range), the metastable t ``-form of the tetragonal phase is retained. We have also determined the t`-t `` and t ``-cubic compositional boundaries at room temperature and analyzed these transitions at high temperature. Finally, using these results, we built up a metastable phase diagram for nanocrystalline compositionally homogeneous ZrO(2)-Sc(2)O(3) solid solutions that strongly differs from that previously determined from compositionally homogeneous ZrO(2)-Sc(2)O(3), Solid solutions with much larger crystallite sizes.Brazilian Synchrotron Light Laboratory (LNLS)Brazilian Synchrotron Light Laboratory (LNLS)CNPq-CONICETConsejo Nacional de Investigaciones Científicas y Técnicas de Argentina (CONICET)Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)SECyT (Argentina)Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)CAPES-SECyT (Brazil-Argentina)Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)CNPq (Brazil)[490289/2005-3]Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)CNPq (Brazil)[490580/2008-4]ANPCyT Agencia Nacional de Promocion Cientifica y Tecnologica[14268]Agencia Nacional de Promoción Científica y Tecnológica (ANPCyT)ANPCyT Agencia Nacional de Promocion Cientifica y Tecnologica[38309]Agencia Nacional de Promoción Científica y Tecnológica (ANPCyT)Agencia Nacional de Promoción Científica y Tecnológica (ANPCyT)ANPCyT Agencia Nacional de Promocion Cientifica y Tecnologica[01152]Consejo Nacional de Investigaciones Científicas y Técnicas de Argentina (CONICET)CONICET[6559]Latin-American Centre for Physics (CLAF)Latin-American Centre for Physics (CLAF)Fundacion YPFFundacion YPF[D10B-XPD-5364][6723][7296

Synchrotron X-ray powder diffraction study of the tetragonal-cubic phase transition in nanostructured ZrO2-Sc2O3 solid solutions

The transition between tetragonal and cubic phases in nanostructured ZrO2-Sc2O3 solid solutions by high-temperature X-ray powder diffraction using synchrotron radiation is presented. ZrO2-8 and 11 mol% Sc2O3 nanopowders that exhibit the t'- and t ''-forms of the tetragonal phase, respectively, were synthesized by a stoichiometric nitrate-lysine gel-combustion route. The average crystallite size treated at 900 degrees C was about 25 nm for both compositions. Our results showed that t'-t '' and t ''-cubic transitions take place for the 8 and 11 mol% Sc2O3 samples, respectively. (C) 2008 International Centre for Diffraction Data

Effects of synthesis conditions on the nanostructre of CexZr1-xO2 mesoporous ceramics.

CexZr1-xO2 (0.5 ≤ x ≤ 0.9) were synthesized with Zr and Ce chloride precursors, using the triblock\ud copolymer Pluronic P123 and HCl (2 mol/L). The pH adjustment was performed in two ways: synthesis\ud A used 11.4 mL of a NH4OH solution added at once to the initial mixture, composed by metal precursors\ud and template in HCl; synthesis B was done by dripping slowly until the change of pH value (between 3\ud and 6). In this work, CexZr1-xO2 samples synthesized by these two processes are compared. The effects of\ud pH values in materials characteristics were also evaluated. These samples were analysed by X-Ray\ud Diffraction (XRD) with Rietveld refinement, and Nitrogen Adsorption/Desorption. In both processes, the\ud studied materials presented two crystalline phases of CexZr1-xO2 solid solution: cubic and tetragonal. The\ud synthesis A also presented a tetragonal phase of ZrO2. The average crystallite size and the Brunauer-\ud Emmett-Teller (BET) surface area are bigger in process A. Both processes give samples with a\ud mesoporous structure.FAPES

Local atomic structure in tetragonal pure ZrO(2) nanopowders

The local atomic structures around the Zr atom of pure (undoped) ZrO(2) nanopowders with different average crystallite sizes, ranging from 7 to 40 nm, have been investigated. The nanopowders were synthesized by different wet-chemical routes, but all exhibit the high-temperature tetragonal phase stabilized at room temperature, as established by synchrotron radiation X-ray diffraction. The extended X-ray absorption fine structure (EXAFS) technique was applied to analyze the local structure around the Zr atoms. Several authors have studied this system using the EXAFS technique without obtaining a good agreement between crystallographic and EXAFS data. In this work, it is shown that the local structure of ZrO(2) nanopowders can be described by a model consisting of two oxygen subshells (4 + 4 atoms) with different Zr-O distances, in agreement with those independently determined by X-ray diffraction. However, the EXAFS study shows that the second oxygen subshell exhibits a Debye-Waller (DW) parameter much higher than that of the first oxygen subshell, a result that cannot be explained by the crystallographic model accepted for the tetragonal phase of zirconia-based materials. However, as proposed by other authors, the difference in the DW parameters between the two oxygen subshells around the Zr atoms can be explained by the existence of oxygen displacements perpendicular to the z direction; these mainly affect the second oxygen subshell because of the directional character of the EXAFS DW parameter, in contradiction to the crystallographic value. It is also established that this model is similar to another model having three oxygen subshells, with a 4 + 2 + 2 distribution of atoms, with only one DW parameter for all oxygen subshells. Both models are in good agreement with the crystal structure determined by X-ray diffraction experiments.LNLS[D04B-XAFS1-4204] - Brazilian Synchrotron Light LaboratoryLNLS[D10B-XPD-4276] - Brazilian Synchrotron Light LaboratoryLNLS[D04B-XAFS1-7248] - Brazilian Synchrotron Light LaboratoryCNPq (Brazil)[490289/2005-3]CNPq (Brazil)[490580/2008-4]FONCyT - Agencia Nacional de Promocion Cientifica y Tecnologica (Argentina)[38309]FONCyT - Agencia Nacional de Promocion Cientifica y Tecnologica (Argentina)[01152]CONICET (Argentina)[6559]Latin-American Centre for PhysicsFundacion YP

In situ gelling liquid crystalline system as local siRNA delivery system

\u3cp\u3eAn effective short interfering RNA (siRNA) delivery system protects the siRNA from degradation, facilitates its cellular uptake, and promotes its release into the cytoplasm. Local administration of siRNA presents advantages over systemic administration, such as the possibility to use lower doses and allow local and sustained release. In this context, in situ solidifying organogels based on monoglycerides (MO), polyethylenimine (PEI), propylene glycol (PG) and tris buffer are an attractive strategy for intratumoral delivery of siRNA. In this study, precursor fluid formulation (PFF) composed of MO/PEI/PG/tris buffer at 7.85:0.65:76.5:15 (w/w/w/w) was used to deliver siRNA to tumor cells. The internal structure of the gel obtained from PFF was characterized using small angle X-ray scattering (SAXS). In addition, its ability to complex siRNA, protect it from degradation, and functionally deliver it to tumor cells was investigated. Moreover, in vivo gel formation following intratumoral injection was evaluated. The gel formed in excess water from PFF was found to comprise a mixture of hexagonal and cubic phases. The system was able to complex high amounts of siRNA, protect it from degradation, promote siRNA internalization, and induce gene silencing in vitro in a variety of tumor cell lines. Moreover, a gel formed in situ following intratumoral injection in a murine xenograft model. In conclusion, PFF is a potential delivery system for local and sustained delivery of siRNA to tumor tissue after intratumoral administration.\u3c/p\u3

Immobilization of glucose oxidase enzyme (GOD) in large pore ordered mesoporous cage-like FDU-1 silica

Large pore ordered mesoporous silica FDU-1 with three-dimensional (3D) face-centered cubic, Fm3m arrangement of rnesopores, was synthesized under strong acid media using B-50-6600 poly(ethylene oxide)-poly(butylene oxide)-poly(ethylene oxide) triblock copolymer (EO(39)BO(47)EO(39)), tetraethyl orthosilicate (TEOS) and trimethyl-benzene (TMB). Large pore FDU-1 silica was obtained by using the following gel composition 1TEOS:0.00735B50-6600:0.00735TMB:6HCl:155H(2)O. The pristine material exhibited a BET specific surface area of 684 m(2) g(-1), total pore volume of 0.89 cm(3) g(-1), external surface area of 49 m(2) g(-1) and microporous volume of 0.09 cm(3) g(-1). The enzyme activity was determined by the Flow Injection Analysis-Chemiluminescence (FIA-CL) method. For GOD immobilized on the FDU-1 silica, GOD supernatant and GOD solution, the FIA-CL results were 9.0, 18.6 and 34.0 U, respectively. The value obtained for the activity of the GOD solution with FIA-CL method is in agreement with the 35 U, obtained by spectrophotometry. (C) 2011 Elsevier B.V. All rights reserved.Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)FAPESP[2007/07646-2]FAPESP[2008/09284-3]Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)CNPqConselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)CAPESCoordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES