Heat-barrier coatings for combustion chambers

Arc-plasma-sprayed layered coating of graded Inconel and zirconia protects film-coolant ring below injector plate of rocket engine combustion chamber. Interfacial temperature is designed for minimum buildup of stress and to avoid melting of the metal phase in the graded layers

Granular two-phase insulation systems

Easily prepared system, consisting of matrix of hollow zirconia microspheres containing dispersed tungsten powder, produces minimum-cost, prototype test specimen. Combination represents basic concept of highly reflective dispersed phase in low density insulative matrix and is stable at 2200 K. Other combinations of materials are suggested

Intergranular metal phase increases thermal shock resistance of ceramic coating

Dispersed copper phase increases the thermal shock resistance of a plasma-arc-sprayed coating of zirconia used as a heat barrier on a metal substrate. A small amount of copper is deposited on the granules of the zirconia powder before arc-spraying the resultant powder composite onto the substrate

Ceramics for advanced O2/H2 application

Ceramics are prime candidate materials for advanced rocket engines because they possess high-temperature capability, a tolerance for aggressive environments, and low density. A program was conducted to assess the applicability of structural ceramics to advanced versions of the Space Shuttle main engine (SSME). Operating conditions of ceramic turbine components were defined and each component in the hot-gas path was assessed in regard to materials selection, manufacturing process and feasibility, and relative structural reliability. The conclusion is that ceramic components would be viable in advanced SSME turbopumps

Remote sensing of geologic mineral occurrences for the Colorado mineral belt using LANDSAT data

The author has identified the following significant results. LANDSAT imagery was examined as a practical and productive tool for mineral exploration along the Colorado Mineral Belt. An attempt was made to identify all large, active and/or abandoned mining districts on the imagery which initially were discovered by surface manifestations. A number of strong photolinements, circular features, and color anomalies were identified. Some of these form a part of the structural and igneous volcanic framework in which mineral deposits occur. No specific mineral deposits such as veins or porphyries were identified. Promising linear and concentric features were field checked at several locations. Some proved to be fault zones and calderas; others were strictly topographic features related to stream or glacial entrenchment. The Silverton Caldera region and the Idaho Springs-Central City district were chosen and studied as case histories to evaluate the application of LANDSAT imagery to mineral exploration. Evidence of specific mineralization related to ore deposits in these two areas were observed only on low level photography

Remote sensing in mineral exploration from LANDSAT (ERTS) imagery. Test site no. 2 (Colorado)

There are no author-identified significant results in this report

F-region drift velocities from incoherent-scatter measurements at Millstone Hill

F-region drift velocities measured at Millstone Hill from 1968 to 1974 are presented in tabular form. A brief description of the measurement procedures is also given

Calculation of conductivities and currents in the ionosphere

Formulas and procedures to calculate ionospheric conductivities are summarized. Ionospheric currents are calculated using a semidiurnal E-region neutral wind model and electric fields from measurements at Millstone Hill. The results agree well with ground based magnetogram records for magnetic quiet days

Growth mechanisms of perturbations in boundary layers over a compliant wall

The temporal modal and nonmodal growth of three-dimensional perturbations in the boundary-layer flow over an infinite compliant flat wall is considered. Using a wall-normal velocity/wall-normal vorticity formalism, the dynamic boundary condition at the compliant wall admits a linear dependence on the eigenvalue parameter, as compared to a quadratic one in the canonical formulation of the problem. This greatly simplifies the accurate calculation of the continuous spectrum by means of a spectral method, thereby yielding a very effective filtering of the pseudospectra as well as a clear identification of instability regions. The regime of global instability is found to be matching the regime of the favorable phase of the forcing by the flow on the compliant wall so as to enhance the amplitude of the wall. An energy-budget analysis for the least-decaying hydroelastic (static-divergence, traveling-wave-flutter and near-stationary transitional) and Tollmien--Schlichting modes in the parameter space reveals the primary routes of energy flow. Moreover, the flow exhibits a slower transient growth for the maximum growth rate of a superposition of streamwise-independent modes due to a complex dependence of the wall-boundary condition with the Reynolds number. The initial and optimal perturbations are compared with the boundary-layer flow over a solid wall; differences and similarities are discussed. Unlike the solid-wall case, viscosity plays a pivotal role in the transient growth. A slowdown of the maximum growth rate with the Reynolds number is uncovered and found to originate in the transition of the fluid-solid interaction from a two-way to a one-way coupling. Finally, a term-by-term energy budget analysis is performed to identify the key contributors to the transient growth mechanism

Simple bonding technique for high-temperature ceramic coatings

Coatings, consisting of zirconia powder bonded with orthophosphoric acid and a small amount of hydrofluoric acid, are hard, strong, and refractory, resist thermal shock, and provide good thermal protection. After the aqueous coating is applied to a metallic surface, only a 600 deg F cure is required before service