Ethyl Zinc β-Ketoiminates and β-Amidoenoates: Influence of Precursor Design on the Properties of Highly Conductive Zinc Oxide Thin Films from Aerosol-Assisted Chemical Vapour Deposition

Highly transparent (>85 %) and conductive (1.086×10-3  Ω cm) zinc oxide thin films have been deposited from specifically selected precursors allowing us to establish a direct correlation between their molecular structure and the optoelectronic properties of the deposited films. Mono-ligated ethyl zinc compounds of varying steric bulk: [EtZn(OC(Me)CH(Me)N(i Pr))]2 (1), [EtZn(OC(OEt)CH(Me)N(i Pr))]2 (2) and [EtZn(OC(OEt)CH(CH3 )N(Dipp))]2 (3) were compared with the related bis-ligated zinc complexes [Zn(OC(Me)CH(Me)N(i Pr))2 ] (4), [Zn(OC(OEt)CH(Me)N(i Pr))2 ] (5) and [Zn(OC(OEt)CH(Me)N(Dipp))2 ] (6). In all cases bulkier ligands resulted in poorer electronic properties of deposited films, whilst all mono-ligated compounds were shown as superior precursors. All complexes were characterised by 1 H and 13 C{1 H} NMR and elemental analysis, with the structure of 6 determined by single crystal X-ray diffraction. Zinc oxide films were deposited from single and dual source (with methanol) reactions of these precursors, and analysed via XRD, XPS and EDX. Optoelectronic properties were investigated through UV/vis spectroscopy and Hall effect measurements, and morphology was examined via SEM. Tauc plots from UV/vis data indicated that Film A showed the lowest band gap of 3.31 eV. Varying the elemental composition of the precursors led to changes in the elemental composition of the resultant films, as well as changes in their structural and optoelectronic properties. Using this approach of precursor design, we have been able to tune single source precursors towards zinc oxide to deposit films with specific properties

Room Temperature Electronic Functionalization of Thermally Sensitive Substrates by Inkjet Printing of a Reactive Silver‐Based MOD Ink

The developments in inkjet printing technology and the printed electronics industry in the past two decades have provided cost-effective, environment-friendly, and reliable alternates to traditional methods of fabricating electrical devices. However, most commercial metallic inks require high sintering temperatures to form desired functional patterns, which limits the applications of printed electronics in scenarios that require electrical devices on thermally sensitive substrates, like biomaterials or bio-synthetic composite materials. This study has provided the synthetic route of a novel silver-based metal organic decomposition (MOD) ink which has been used to form highly conductive silver films on the thermally sensitive skin-inspired silk/epoxy composite substrates by directly inkjet printing with accurate pattern control, whilst self-decomposing and sintering at room temperature. The fabricated silver patterns on the thermally sensitive silk/epoxy composite substrate were highly conductive with conductivity of 4.65 × 104 S m−1. These silver patterns also showed impressive malleability as bulk silver films, which could be further developed into motion sensors for wearable devices or medical applications. Our strategy provides a general platform for electronic functionalization without temperature constraints. The particle-free, reactive silver-precursor, and lower sintering temperature of the ink also widen the choices of substrates, as exemplified herein with outstanding printing quality and high electrical conductivity (1.20 × 106 S m−1) also achieved on paper

Deposition of metallic silver from versatile amidinate precursors for use in functional materials

Silver (Ag) amidinate metal organic decomposition precursors of the type: [Ag2((ArN)2C(H))2] (Ar = 2,6-dimethylphenyl (1), 2,6-diethylphenyl (2) and 2,6-diisopropylphenyl (3)) have been used for the first time in the deposition of Ag films on glass with multiple functionalities with potential application in optical/biological sensors or for use in electronic circuitry. Precursors 1–3 were isolated from the reaction of silver acetate with the appropriate ligand in a 1:2 stoichiometry and were characterized by 1H and 13C{1H} NMR, thermal gravimetric analysis and single crystal X-ray diffraction for 2. Single-layer depositions at 200 °C on glass substrates via spin coating produced transparent (>90% transmittance) coatings, with well-defined Ag nanoparticles. Multi-layer depositions at 200 °C on glass had a metallic lustre and were found to be conductive ( ρ = 0.916–1.83 × 10−6 Ωm). All films were strongly adhered and displayed excellent coverage of the substrate. Ag films deposited from 1 to 3 were analysed by grazing incidence X-ray diffraction, X-ray photoelectron spectroscopy, energy-dispersive X-ray analysis and scanning electron microscopy, with optical properties determined by UV-Vis spectroscopy

Tris(β‐ketoiminate) Aluminium(III) Compounds as Aluminium Oxide Precursors

Precursor design is the crucial step in tailoring the deposition profile towards a multitude of functional materials. Most commercially available aluminium oxide precursors require high processing temperatures (>500 °C). Herein, we report the tuning of the decomposition profile (200–350 °C) of a range of octahedrally coordinated tris(β-ketoiminate) aluminium complexes of the type [Al(MeCN(R)CHC=OMe)3], by varying the R substituents in the ligands. The complexes are derived from the reaction of trimethylamine alane (TMAA) and a series of N-substituted β-ketoiminate ligands (R-acnacH, R=Me, Et, iPr, Ph) with varying R-substituents sizes. When the more sterically encumbered ligand (R=Mes) was used, the Al atom became five-coordinate, therefore representing the threshold to octahedral coordination around the metal in these type of compounds, which, consequently, lead to a change of decomposition profile. The resulting compounds have been characterised by NMR spectroscopy, mass spectrometry, elemental analysis and single crystal X-ray diffraction. [Al(MeCN(Me)CHC=OMe)3] has been used as a single source precursor for the deposition of Al2O3. Thin films were deposited via aerosol assisted chemical vapour deposition (AACVD), with toluene as the solvent, and were analysed using SEM, EDX and XPS

Mixed Valence {Ni²⁺Ni¹⁺} Clusters as Models of Acetyl Coenzyme ASynthase Intermediates

Acetyl coenzyme A synthase (ACS) catalyzes the formation and deconstruction of the key biological metabolite, acetyl coenzyme A (acetyl-CoA). The active site of ACS features a {NiNi} cluster bridged to a [Fe4S4]n+ cubane known as the A-cluster. The mechanism by which the A-cluster functions is debated, with few model complexes able to replicate the oxidation states, coordination features, or reactivity proposed in the catalytic cycle. In this work, we isolate the first bimetallic models of two hypothesized intermediates on the paramagnetic pathway of the ACS function. The heteroligated {Ni2+Ni1+} cluster, [K(12-crown-4)2][1], effectively replicates the coordination number and oxidation state of the proposed “Ared” state of the A-cluster. Addition of carbon monoxide to [1]− allows for isolation of a dinuclear {Ni2+Ni1+(CO)} complex, [K(12-crown-2)n][2] (n = 1–2), which bears similarity to the “ANiFeC” enzyme intermediate. Structural and electronic properties of each cluster are elucidated by X-ray diffraction, nuclear magnetic resonance, cyclic voltammetry, and UV/vis and electron paramagnetic resonance spectroscopies, which are supplemented by density functional theory (DFT) calculations. Calculations indicate that the pseudo-T-shaped geometry of the three-coordinate nickel in [1]– is more stable than the Y-conformation by 22 kcal mol–1, and that binding of CO to Ni1+ is barrierless and exergonic by 6 kcal mol–1. UV/vis absorption spectroscopy on [2]− in conjunction with time-dependent DFT calculations indicates that the square-planar nickel site is involved in electron transfer to the CO π*-orbital. Further, we demonstrate that [2]− promotes thioester synthesis in a reaction analogous to the production of acetyl coenzyme A by ACS

Comparison of general population, patient, and carer utility values for dementia health states.

Utility values to estimate quality-adjusted life years (QALYs) for use in cost-utility analyses are usually elicited from members of the general population. Public attitudes and understanding of dementia in particular may mean that values elicited from the general population may differ from patients and carers for dementia health states. This study examines how the population impacts utility values elicited for dementia health states using interviewer-administered time tradeoff valuation of health states defined by the dementia-specific preference-based measures DEMQOL-U (patient-report) and DEMQOL-Proxy-U (carer-report). Eight DEMQOL-U states were valued by 78 members of the UK general population and 71 patients with dementia of mild severity. Eight DEMQOL-Proxy-U states were valued by 77 members of the UK general population and 71 carers of patients with dementia of mild severity. Random-effects generalized least squares regression estimated the impact of population, dementia health state, and respondent sociodemographic characteristics on elicited values, finding that values for dementia health states differed by population and that the difference varied across dementia health states. Patients with dementia and carers of patients with dementia gave systematically lower values than members of the general population that were not due to differences in the sociodemographic characteristics of the populations. Our results suggest that the population used to produce dementia health state values could impact the results of cost-utility analyses and potentially affect resource allocation decisions; yet, currently, only general population values are available for usage

Metal β-diketoiminate precursor use in aerosol assisted chemical vapour deposition of gallium- and aluminium-doped zinc oxide

Aerosol assisted chemical vapour deposition (AACVD) has been used to deposit thin films of ZnO from the single-source precursor [Zn(OC(Me)CHC(Me)N(iPr))2] (1) affording highly transparent (>80%) and conductive films (sheet resistance ∼70 KΩ/sq). Extension of this AACVD method whereby related precursors of the type, [R2M(OC(Me)CHC(Me)N(iPr))] (R = Et, M = Al (2); R = Me, M = Ga (3)), isolated as oils, were added to the precursor solution allowed for the deposition of aluminium- and gallium-doped ZnO (AZO and GZO) films, respectively. Complexes 1–3 were characterised by elemental analysis, NMR and mass spectrometry. Films were deposited in under 30 min at 400 °C, from CH2Cl2/toluene solutions with a N2 carrier gas. Herein we report the bulk resistivity, ρ, of AZO (0.252 Ω cm) and GZO (0.756 Ω cm) films deposited from this novel approach. All the films transparency exceeded 80% in the visible, X-ray diffraction (XRD) showed all films to crystallise in the wurtzite phase whilst X-ray photoemission spectroscopy (XPS) confirmed the presence of the Al and Ga dopants in the films, and highlighted the low C-contamination (<5%) this route offers. Investigation of a mechanism analogous to the Kirkendall effect confirmed that heating of GZO films at 1000 °C produced the spinel structure GaZn2O4

Reactivity of vanadium oxytrichloride with [beta]-diketones and diesters as precursors for vanadium nitride and carbide

Vanadium(V) oxytrichloride was reacted with 2,4-pentanedione, diethyl malonate, and diethyl succinate under inert conditions, forming compounds: dichloro(oxo)(2,4-pentanedione) vanadium(V) [1], dichloro(oxo)(diethyl malonate) vanadium(IV) [2] and dichloro(oxo)(diethyl succinate) vanadium(IV) [3]. Compounds 1–3 are coordinated to the vanadium centre through the two carbonyl oxygen atoms of the bidentate ligand. It was determined by X-ray crystallography that the structures of the resulting complexes were significantly different, resulting in a monomeric complex (1), a tetrameric ring (2) and a 1D coordination polymer (3). Following the synthesis and isolation of 1–3, they were tested as precursors for vanadium nitride and vanadium carbide by annealing under nitrogen and argon respectively at 1200 °C for 24 h. The resulting materials were characterised by: XRD, EDS, XPS and TEM

Unraveling the Steric Link to Copper Precursor Decomposition: A Multi-Faceted Study for the Printing of Flexible Electronics

The field of printed electronics strives for lower processing temperatures to move toward flexible substrates that have vast potential: from wearable medical devices to animal tagging. Typically, ink formulations are optimized using mass screening and elimination of failures; as such, there are no comprehensive studies on the fundamental chemistry at play. Herein, findings which describe the steric link to decomposition profile: combining density functional theory, crystallography, thermal decomposition, mass spectrometry, and inkjet printing, are reported. Through the reaction of copper(II) formate with excess alkanolamines of varying steric bulk, tris-co-ordinated copper precursor ions: "[CuL3 ]," each with a formate counter-ion (1-3) are isolated and their thermal decomposition mass spectrometry profiles are collected to assess their suitability for use in inks (I1-3 ). Spin coating and inkjet printing of I1,2 provides an easily up-scalable method toward the deposition of highly conductive copper device interconnects (ρ = 4.7-5.3 × 10-7 Ω m; ≈30% bulk) onto paper and polyimide substrates and forms functioning circuits that can power light-emitting diodes. The connection among ligand bulk, coordination number, and improved decomposition profile supports fundamental understanding which will direct future design

Metal–organic frameworks and their derivatives for optimizing lithium metal anodes

Lithium metal anodes (LMAs) have been considered the ultimate anode materials for next-generation batteries. However, the uncontrollable lithium dendrite growth and huge volume expansion that can occur during charge and discharge seriously hinder the practical application of LMAs. Metal–organic framework (MOF) materials, which possess the merits of huge specific surface area, excellent porosity, and flexible composition/structure tunability, have demonstrated great potential for resolving both of these issues. This article first explores the mechanism of lithium dendrite formation as described by four influential models. Subsequently, based on an in-depth understanding of these models, we propose potential strategies for utilizing MOFs and their derivatives to suppress lithium dendrite growth. We then provide a comprehensive review of research progress with respect to various applications of MOFs and their derivatives to suppress lithium dendrites and inhibit volume expansion. The paper closes with a discussion of perspectives on future modifications of MOFs and their derivatives to achieve stable, dendrite-free lithium metal batteries