Fracture liaison programs

In view of the high imminent risk of having subsequent fractures after a fracture, early evaluation and treatment decisions to prevent subsequent fractures are advocated. After a hip fracture, the fracture liaison service (FLS) and orthogeriatric care are considered the most appropriate organisational approaches for secondary fracture prevention following a recent fracture.Their introduction and implementation have been shown to increase evaluation and treatment of patients at high risk for subsequent fracture. Of real-world cohort studies, most, but not all studies, indicate a lower incidence of fracture and longer survival after treatment with nitrogen-containing bisphosphonates. (C) 2019 Elsevier Ltd. All rights reserved.</p

Quantification of 3D microstructural parameters of trabecular bone is affected by the analysis software

Over the last decades, the use of high-resolution imaging systems to assess bone microstructural parameters has grown immensely. Yet, no standard defining the quantification of these parameters exists. It has been reported that different voxel size and/or segmentation techniques lead to different results. However, the effect of the evaluation software has not been investigated so far. Therefore, the aim of this study was to compare the bone microstructural parameters obtained with two commonly used commercial software packages, namely IPL (Scanco, Switzerland) and CTan (Bruker, Belgium). We hypothesized that even when starting from the same segmented scans, different software packages will report different results. Nineteen trapezia and nineteen distal radii were scanned at two resolutions (20 mu m voxel size with microCT and HR-pQCT 60 mu m). The scans were segmented using the scanners' default protocol. The segmented images were analyzed twice, once with IPL and once with CTan, to quantify bone volume fraction (BV/TV), trabecular thickness (Tb.Th), trabecular separation (Tb.Sp), trabecular number (Tb.N) and specific bone surface (BS/BV). Only small differences between IPL and CTan were found for BV/TV. For Tb.Th, Tb.Sp and BS/BV high correlations (R-2 >= 0.99) were observed between the two software packages, but important relative offsets were observed. For microCT scans, the offsets were relative constant, e.g., around 15% for Tb.Th. However, for the HR-pQCT scans the mean relative offsets ranged over the different bone samples (e.g., for Tb.Th from 14.5% to 19.8%). For Tb.N, poor correlations (0.43 We conclude that trabecular bone microstructural parameters obtained with IPL and CTan cannot be directly compared except for BV/TV. For Tb.Th, Tb.Sp and BS/BV, correction factors can be determined, but these depend on both the image voxel size and specific anatomic location. The two software packages did not produce consistent data on Tb.N. The development of a universal standard seems desirable

High-Resolution Cone-Beam Computed Tomography is a Fast and Promising Technique to Quantify Bone Microstructure and Mechanics of the Distal Radius

Obtaining high-resolution scans of bones and joints for clinical applications is challenging. HR-pQCT is considered the best technology to acquire high-resolution images of the peripheral skeleton in vivo, but a breakthrough for widespread clinical applications is still lacking. Recently, we showed on trapezia that CBCT is a promising alternative providing a larger FOV at a shorter scanning time. The goals of this study were to evaluate the accuracy of CBCT in quantifying trabecular bone microstructural and predicted mechanical parameters of the distal radius, the most often investigated skeletal site with HR-pQCT, and to compare it with HR-pQCT. Nineteen radii were scanned with four scanners: (1) HR-pQCT (XtremeCT, Scanco Medical AG, @ (voxel size) 82 mu m), (2) HR-pQCT (XtremeCT-II, Scanco, @60.7 mu m), (3) CBCT (NewTom 5G, Cefla, @75 mu m) reconstructed and segmented using in-house developed software and (4) microCT (VivaCT40, Scanco, @19 mu m-gold standard). The following parameters were evaluated: predicted stiffness, strength, bone volume fraction (BV/TV) and trabecular thickness (Tb.Th), separation (Tb.Sp) and number (Tb.N). The overall accuracy of CBCT with in-house optimized algorithms in quantifying bone microstructural parameters was comparable (R-2 = 0.79) to XtremeCT (R-2 = 0.76) and slightly worse than XtremeCT-II (R-2 = 0.86) which were both processed with the standard manufacturer's technique. CBCT had higher accuracy for BV/TV and Tb.Th but lower for Tb.Sp and Tb.N compared to XtremeCT. Regarding the mechanical parameters, all scanners had high accuracy (R-2 >= 0.96). While HR-pQCT is optimized for research, the fast scanning time and good accuracy renders CBCT a promising technique for high-resolution clinical scanning

Integrated nutritional intervention in the elderly after hip fracture. A process evaluation

SummaryBackground & aimsWithin a multicentre randomized controlled trial aimed at improving the nutritional status and increase the speed of recovery of elderly hip fracture patients, we performed a process evaluation to investigate the feasibility of the intervention within the present Dutch health care system.MethodsPatients in the intervention group received nutritional counseling during 10 contacts. Oral nutritional supplements were advised as needed until three months after hip fracture surgery. The intervention was evaluated with respect to dieticians’ adherence to the study protocol, content of nutritional counseling, and patients’ adherence to recommendations given.ResultsWe included 66 patients (mean age of 76, range 55–92 years); 74% women. Eighty-three percent of patients received all 10 contacts as planned, but in 62% of the patients one or more telephone calls had to be replaced by face to face contacts. Nutritional counseling was complete in 91% of contacts. Oral nutritional supplementation was needed for a median period of 76 days; 75% of the patients took the oral nutritional supplements as recommended.ConclusionsNutritional counseling in elderly hip fracture patients through face to face contacts and telephone calls is feasible. However, individual tailoring of the intervention is recommended. The majority of hip fracture patients needed >2 months oral nutritional supplements to meet their nutritional requirements.The trial was registered at clincialtrails.gov as NCT00523575

Efficacy and cost-effectiveness of nutritional intervention in elderly after hip fracture: design of a randomized controlled trial

Background: Hip fracture patients often have an impaired nutritional status at the time of fracture, which can result in a higher complication rate, prolonged rehabilitation time and increased mortality. A study was designed to evaluate the effect of nutritional intervention on nutritional status, functional status, total length of stay, postoperative complications and cost-effectiveness. Methods: Open-labelled, multi-centre, randomized controlled trial in hip fracture patients aged 55 years and above. The intervention group receives dietetic counselling (by regular home visits and telephone calls) and oral nutritional supplementation for three months after surgery. The control group receives usual dietetic care as provided by the hospital. Outcome assessment is performed at three and six months after hip fracture. Discussion: Patient recruitment has started in July 2007 and has ended in December 2009. First results are expected in 2011. Trial registration: ClinicalTrials.gov NCT00523575Mechanical, Maritime and Materials Engineerin

Evaluation of patients with a recent clinical fracture and osteoporosis, a multidisciplinary approach

The aetiology of osteoporotic fractures is multifactorial, but little is known about the way to evaluate patients with a recent clinical fracture for the presence of secondary osteoporosis

Frailty is associated with in-hospital mortality in older hospitalised COVID-19 patients in the Netherlands:the COVID-OLD study

BACKGROUND: During the first wave of the coronavirus disease 2019 (COVID-19) pandemic, older patients had an increased risk of hospitalisation and death. Reports on the association of frailty with poor outcome have been conflicting. OBJECTIVE: The aim of the present study was to investigate the independent association between frailty and in-hospital mortality in older hospitalised COVID-19 patients in the Netherlands. METHODS: This was a multicentre retrospective cohort study in 15 hospitals in the Netherlands, including all patients aged ≥70 years, who were hospitalised with clinically confirmed COVID-19 between February and May 2020. Data were collected on demographics, co-morbidity, disease severity and Clinical Frailty Scale (CFS). Primary outcome was in-hospital mortality. RESULTS: A total of 1,376 patients were included (median age 78 years (interquartile range 74-84), 60% male). In total, 499 (38%) patients died during hospital admission. Parameters indicating presence of frailty (CFS 6-9) were associated with more co-morbidities, shorter symptom duration upon presentation (median 4 versus 7 days), lower oxygen demand and lower levels of C-reactive protein. In multivariable analyses, the CFS was independently associated with in-hospital mortality: compared with patients with CFS 1-3, patients with CFS 4-5 had a two times higher risk (odds ratio (OR) 2.0 (95% confidence interval (CI) 1.3-3.0)) and patients with CFS 6-9 had a three times higher risk of in-hospital mortality (OR 2.8 (95% CI 1.8-4.3)). CONCLUSIONS: The in-hospital mortality of older hospitalised COVID-19 patients in the Netherlands was 38%. Frailty was independently associated with higher in-hospital mortality, even though COVID-19 patients with frailty presented earlier to the hospital with less severe symptoms

Can predicting COVID-19 mortality in a European cohort using only demographic and comorbidity data surpass age-based prediction: An externally validated study.

peer reviewedOBJECTIVE: To establish whether one can build a mortality prediction model for COVID-19 patients based solely on demographics and comorbidity data that outperforms age alone. Such a model could be a precursor to implementing smart lockdowns and vaccine distribution strategies. METHODS: The training cohort comprised 2337 COVID-19 inpatients from nine hospitals in The Netherlands. The clinical outcome was death within 21 days of being discharged. The features were derived from electronic health records collected during admission. Three feature selection methods were used: LASSO, univariate using a novel metric, and pairwise (age being half of each pair). 478 patients from Belgium were used to test the model. All modeling attempts were compared against an age-only model. RESULTS: In the training cohort, the mortality group's median age was 77 years (interquartile range = 70-83), higher than the non-mortality group (median = 65, IQR = 55-75). The incidence of former/active smokers, male gender, hypertension, diabetes, dementia, cancer, chronic obstructive pulmonary disease, chronic cardiac disease, chronic neurological disease, and chronic kidney disease was higher in the mortality group. All stated differences were statistically significant after Bonferroni correction. LASSO selected eight features, novel univariate chose five, and pairwise chose none. No model was able to surpass an age-only model in the external validation set, where age had an AUC of 0.85 and a balanced accuracy of 0.77. CONCLUSION: When applied to an external validation set, we found that an age-only mortality model outperformed all modeling attempts (curated on www.covid19risk.ai) using three feature selection methods on 22 demographic and comorbid features