14 research outputs found
) Australian Nuclear Science and Technology Organisation (ANSTO)
ABSTRACT The aim of this work is to model the vibrational behaviour of thin plates joined to a stiff orthogonal side plate using the technique of 'roll swaging'. Swage joints are typically found in plate-type fuel assemblies for nuclear reactors. Since they are potentially liable to flow-induced vibrations, it is crucial to be able to predict their dynamic characteristics. It is shown that the contact between the plates resulting from the swage can be modelled assuming a perfect clamp of all the degrees of freedom but the rotational around the axis parallel to the swage. A modal analysis was performed on different specimens and the values of the first natural frequencies are used to find the equivalent torsional spring stiffness, by matching these frequencies with the results obtained from a finite element model (FEM)
Acoustic signature of a submarine hull
A model to predict the acoustic signature of a submarine resulting from the radial vibration of the hull under axial excitation is presented. The simplified physical model of the submarine hull includes complicating effects such the presence of bulkheads, end enclosures, ring stiffeners and fluid loading due to the interaction with the surrounding medium. Under an axial symmetric force, only the ‘breathing’ modes of the cylinder corresponding to the n=0 circumferential modes are excited. To show the sound radiation due to the higher order n≥1 modes, a point axial force acting at one end of the shell has been considered. At low frequencies, the structural wavenumbers are generally subsonic. However, due to the finite cylinder, the wavenumber spectrum is a convolution of the spectrum of an infinite structure and a window generating radiation by means of the presence of supersonic components. The effect of the bulkheads on the structural and acoustic responses of the hull is also presented
Low frequency structural and acoustic responses of a submarine hull under eccentric axial excitation from the propulsion system
A model to describe the low frequency dynamic and acoustic responses of a submarine hull subject to an eccentric harmonic propeller shaft excitation is presented. The submarine is modelled as a fluid-loaded, ring stiffened cylindri-cal shell with internal bulkheads and conical end caps. The stiffeners are introduced using a smeared approach. A harmonic axial force is introduced by the propeller and is transmitted to the hull through the shaft. It results in excita-tion of the accordion modes only if the force is symmetrically distributed to the structure. Otherwise the excitation can be modelled as the sum of a distributed load and a moment applied to the edge of the hull. This leads to excitation of the higher order circumferential modes that can result in high noise signature. Structural and acoustic responses are presented in terms of deformation shapes and directivity patterns for the radiated sound pressure. Results for the case of purely axisymmetric excitation and the case in which an eccentricity is introduced are compared
Structural and acoustic responses of a submerged vessel
Excitation of the low frequency vibrational modes of a submerged vessel can generate significant radiated noise levels. Vibrational modes of a submarine hull are excited from the transmission of fluctuating forces through the shaft and thrust bearings due to the propeller rotating in an unsteady fluid. The focus of this work is to investigate the structural and acoustic responses of a submarine hull under axial excitation. The submarine hull is modelled as a cylindrical shell with internal bulkheads and ring stiffeners. The cylindrical shell is closed by truncated conical shells, which in turn are closed at each end using circular plates. The entire structure is submerged in a heavy fluid medium. The structural responses of the submerged vessel are calculated by solving the cylindrical shell equations of motion using a wave approach and the conical shell equations with a power series solution. The displacement normal to the surface of the structure in contact with the fluid medium was calculated by assembling the boundary/continuity matrix. The far field radiated sound pressure was then calculated by means of the Helmholtz integral. Results from the analytical model are compared with computational results from a fully coupled finite element/boundary element model. The individual and combined effects of the various influencing factors, corresponding to the ring stiffeners, bulkheads, conical end closures and fluid loading, on the structural and acoustic responses are characterised by examining the contribution by the circumferential modes. It is shown that equally spaced internal bulkheads generate a periodic structure thus creating a grouping effect for the higher circumferential modes, but do not have strong influence on the sound radiation. Stiffeners are found to have an important effect on both the dynamic and acoustic responses of the hull. The contribution of the conical end closures on the radiated sound pressure for the lowest circumferential mode numbers is also clearly observed. This work shows the importance of the bending modes when evaluating the sound pressure radiated by a submarine under harmonic excitation from the propulsion system