69,581 research outputs found
Tube sealing device Patent
Hermetic sealing device for ends of tubular bodies during materials testing operation
Multislot film cooled pyrolytic graphite rocket nozzle Patent
Multislot film cooled pyrolytic graphite rocket nozzl
Reducing Prawn-trawl Bycatch in Australia: An Overview and an Example from Queensland
Prawn trawling occurs in most states of Australia in tropical, subtropical, and temperate waters. Bycatch occurs
to some degree in all Australian trawl fisheries, and there is pressure to reduce the levels of trawl fishery bycatch. This paper gives a brief overview of the bycatch issues and
technological solutions that have been evaluated or adopted in Australian prawn-trawl fi sheries. Turtle excluder devices (TED’s) and bycatch reduction devices (BRD’s) are
the principal solutions to bycatch in Australian prawn-trawl fisheries. This paper focuses on a major prawn-trawl fishery of northeastern Australia, and the results of
commercial use of TED’s and BRD’s in the Queensland east coast trawl fishery are presented. New industry designs are
described, and the status of TED and BRD adoption and regulation is summarized. The implementation of technological solutions to reduce fishery bycatch is assumed generally to assist prawn-trawl fisheries within
Australia in achieving legislative requirements for minimal environmental impact and ecological sustainable development
Dynamical scaling in Ising and vector spin glasses
We have studied numerically the dynamics of spin glasses with Ising and XY
symmetry (gauge glass) in space dimensions 2, 3, and 4. The nonequilibrium
spin-glass susceptibility and the nonequilibrium energy per spin of samples of
large size L_b are measured as a function of anneal time t_w after a quench to
temperatures T. The two observables are compared to the equilibrium spin-glass
susceptibility and the equilibrium energy, respectively, measured as functions
of temperature T and system size L for a range of system sizes. For any time
and temperature a nonequilibrium time-dependent length scale L*(t_w,T) can be
defined by comparing equilibrium and nonequilibrium quantities. Our analysis
shows that for all systems studied, an "effective dynamical critical exponent"
parametrization L*(t_w,T) = A(T) t^(1/z(T)) fits the data well at each
temperature within the whole temperature range studied, which extends from well
above the critical temperature to near T = 0 for dimension 2, or to well below
the critical temperature for the other space dimensions studied. In addition,
the data suggest that the dynamical critical exponent z varies smoothly when
crossing the transition temperature.Comment: 14 pages, 13 figures, 9 table
Improvement of maneuver aerodynamics by spanwise blowing
Spanwise blowing was used to test a generalized wind-tunnel model to investigate component concepts in order to provide improved maneuver characteristics for advanced fighter aircraft. Primary emphasis was placed on performance, stability, and control at high angles of attack and subsonic speeds. Test data were obtained in the Langley high speed 7 by 10 foot tunnel at free stream Mach numbers up to 0.50 for a range of model angles of attack, jet momentum coefficients, and leading and trailing edge flap deflection angles. Spanwise blowing on a 44 deg swept trapezoidal wing resulted in leading edge vortex enhancement with subsequent large vortex induced lift increments and drag polar improvements at the higher angles of attack. Small deflections of a leading edge flap delayed these lift and drag benefits to higher angles of attack. In addition, blowing was more effective at higher Mach numbers. Spanwise blowing in conjunction with a deflected trailing edge flap resulted in lift and drag benefits that exceeded the summation of the effects of each high lift device acting alone. Asymmetric blowing was an effective lateral control device at the higher angles of attack
Effects of spanwise blowing on the surface pressure distribution and vortex-lift characteristics of a trapezoidal wing-strake configuration
The effects of spanwise blowing on the surface pressures of a 44 deg swept trapezoidal wing-strake configuration were measured. Wind tunnel data were obtained at a free stream Mach number of 0.26 for a range of model angle of attack, jet thrust coefficient, and nozzle chordwise location. Results showed that spanwise blowing delayed the leading edge vortex breakdown to larger span distances and increased the lifting pressures. Vortex lift was achieved at span stations immediately outboard of the strake-wing junction with no blowing, but spanwise blowing was necessary to achieve vortex lift at increased span distances. Blowing on the wing in the presence of the strake was not as effective as blowing on the wing alone. Spanwise blowing increased lift throughout the angle-of-attack range, improved the drag polars, and extended the linear pitching moment to higher values of lift. The leading edge suction analogy can be used to estimate the effects of spanwise blowing on the aerodynamic characteristics
Refractory thrust chambers for spacecraft engines Final report
Structural reliability tests on pyrolytic graphite and pyrolytic graphite alloys for use in liquid propellant rocket engine thrust chambers and nozzle
A study of the semiannual density variation in the upper atmosphere from 1958 to 1966, based on satellite drag analysis
Semiannual density variation in upper atmosphere from 1958 to 1966 based on satellite drag analysi
- …