Dental trauma in the anterior sector: an analysis of the predisposing factors in a group of orthodontic patients.

Aim. The aim of this study was to analyze the predisposing factors of upper incisal trauma in children candidates for orthodontic treatment. Methods. This is a retrospective study involving 102 consecutive patients who requested orthodontic therapy at Pediatric Dentistry Clinic of Bari University’s Dental School during the time frame 2012-2019. The distribution of reported dental trauma was analyzed according to gender, type of trauma, etiology, overjet and labial competence. Results. No substantial association between gender and trauma emerged from our study. Patients between the age range of 11-15 years appear to be at increased risk. A statistically significant correlation between increase in overjet and traumatic events was found. A link was discovered between labial incompetence and trauma, since this condition increases the risk of trauma by exposing part of the surface of the upper incisors. A correlation also emerged between Skeletal Class II and the increased risk of traumatic injury. Conclusions. Dental trauma, especially in the anterior sector, is a fairly frequent occurrence in pediatric and adolescent patients and is linked to several factors. In our study subjects with Skeletal Class II division I malocclusion with elevated overjet are more predisposed to dental trauma. The limitations of our study are the low number of subjects in the examined sample, and the heterogeneity of the trauma presentation

Assessment of psychopatologic traits in a group of patients with adult chronic periodontitis: Study on 108 cases and analysis of compliance during and after periodontal treatment

Objectives: Although there is nowadays wide agreement on bacteria being the main etiologic agents of periodontal disease, their sole presence cannot damage periodontal tissues in all subjects. This suggests that an individual response and an adaptation to a certain quantity of bacterial biofilm can occur without the disease progressing and vice versa. Depression, stress and anxiety have not been confirmed yet as risk conditions but, in some observational studies, they have been identified as potential risk factors of periodontal disease. The current study aims at investigating the role which these psychological disorder have in the onset and progression of advanced stage periodontitis. Materials and methods: The case selection was carried out by means of clinical and radiological periodontal assessment involving a total of 108 subjects, both male and female, aged between 24 and 67. Patients were then divided in two groups of 54 patients each: the first group included patients with severe periodontal disease, the second group was formed by periodontally healthy subjects. Clinical assessment was performed by a sole examiner who selected and divided periodontopathic patients from non-periodontopathic ones. From the current study were excluded: patients with systemic pathologies; smokers; patients taking antidepressant drugs; pregnant women. Results: For what concerns depression, in the group of periodontopathic patients it was found that the 62.5% of them were depressed, against the 38.86% in the group of periodontally healthy subjects. For the other two psychological conditions taken into consideration, anxiety and stress, it emerged a different percentage of subjects with anxiety in the periodontal group (31.48%) against healthy controls (20.37%). Conclusions: For each of the psychological variables considered (depression, anxiety, stress), a significant correlation could be observed with periodontal disease, it can be therefore be suggested that the importance these disturbs have in the onset and progress of the dental disease which supports the existing available data in literature. The innovative aspect of this research was the focus on the assessment of compliance, monitoring the ability of periodontal patients to follow oral hygiene instructions aiming at the improving and keeping their own periodontal condition, even though this takes more time than the control group

Clinical Evaluation and Orodental Status in a Group of Elderly Institutionalised Patients

10% of elderly patients are functionally dependents and they therefore need permanent assistance. Orodental alterations may evolve into a pathological state in elderly people, which is increasing in the recent decades. The current study analysed institutionalized patients in the district of Bari (Southern Italy), who have been so far monitored. We assessed 125 elderly institutionalized patients. The assessment has been carried out by an assessment questionnaire aiming at evaluating the patient’s psychophysical health status, objective intraoral test and prosthetic rehabilitations. About 90% of enrolled patients reported a good general health status. The main dental problems are due to the complete lack of specific prevention and treatment programs, together with handicap, presence of systemic diseases and medicines taken. The level of oral hygiene is poor and the conditions of the residual dental elements are precarious because of root caries and periodontal problems. Prostheses are usually old (on average 15) and appear scarcely retentive and unstable. We believe in the need for specific interventions aiming at the various issues emerging from the present study, so as to achieve a smaller prevalence of dental loss, periodontal disease and caries. These relatively simple interventions are now lacking because of the non-demand of treatment from patients and for economical reasons

Minimally invasive (flapless) crown lengthening by erbium:YAG laser in aesthetic zone.

Crown lengthening is a surgical procedure aimed at exposure of a larger tooth surface by gingivectomy alone or with cortical bone remodelling for aesthetic purposes in the anterior zone of the maxilla or for reconstruction of teeth affected by subgingival caries. We report two cases of crown lengthening in the anterior maxilla for aesthetic purposes by gingival and bone re-contouring performed by erbium-doped yttrium aluminium garnet (erbium:YAG) laser. As highlighted in this report, the erbium:YAG laser-assisted crown lengthening is less invasive and also leads to faster clinical outcomes in contrast to the conventional surgical technique by scalpel incision, flap elevation and osteoplastic

The Accuracy of Three Intraoral Scanners in the Oral Environment with and without Saliva: A Comparative Study

Background: with the emergence of technological innovations in the dental industry, one emerging trend has been the intraoral digitizing of patients by using intraoral scanning systems. Compared to taking conventional impressions, the use of intraoral scanners (IOS) is suitable for capturing direct optical impressions, helping to improve diagnostic efficacy, save time, reduce patient discomfort, and simplify clinical procedures. Intraoral scanning systems appear to have a high potential for providing guidance on proper standards of care. However, one main disadvantage is breathing and saliva secretion, which causes deviations, interfering with the applicability and accuracy of the optical impression. The aim of this study was to compare the validity and accuracy of three commercially available intraoral scanners, performing an analysis exploiting a wet model. Methods: an in vitro experimental study of four permanent teeth (two molars and two premolars) on the accuracy of copings obtained by subgingival preparations was performed, using an oral wet environment model. Two hundred and forty digital impressions were produced from three digital scanners using four samples. Descriptive analysis was performed using mean, standard deviation, and median. ANOVA and F-tests were performed to assess the amount of variability between the groups. For statistical analysis a 95% significance level was chosen. Results: all differences between groups were statistically significant. Conclusions: the present data implicate a huge impact of the oral biological fluids on the accuracy of digital impression to corresponding images, implying a failure of accurate impression under wetness conditions

Minimally invasive (flapless) crown lengthening by erbium:YAG laser in aesthetic zone.

Crown lengthening is a surgical procedure aimed at exposure of a larger tooth surface by gingivectomy alone or with cortical bone remodelling for aesthetic purposes in the anterior zone of the maxilla or for reconstruction of teeth affected by subgingival caries. We report two cases of crown lengthening in the anterior maxilla for aesthetic purposes by gingival and bone re-contouring performed by erbium-doped yttrium aluminium garnet (erbium:YAG) laser. As highlighted in this report, the erbium:YAG laser-assisted crown lengthening is less invasive and also leads to faster clinical outcomes in contrast to the conventional surgical technique by scalpel incision, flap elevation and osteoplastic

Exploring the Role of Fusobacterium nucleatum in Preterm Birth: A Narrative Review

In recent years, substantive attention has been drawn to the relationship between oral microbiome homeostatic equilibrium disruption and systemic health, demonstrating the negative impacts of this reciprocal biological interplay. Increasingly, there is a concern over the potential noxious effect of oral microbiome dysbiosis on obstetric poor outcomes, focusing on preterm birth. This epidemiological observation remains unexplained, although biologically plausible mechanism has been proposed. Intrauterine infection has long been associated with adverse pregnancy, when the elicitation of an immune response is determinant. There is evidence that Fusobacterium nucleatum (FN), a Gram-negative anaerobe ubiquitous in the oral cavity, infects the mouse placenta originating in the decidua basalis. Based on the current data in literature, we performed a review to provide resources for the explanation of the potential impact of microbiome dysbiosis on poor obstetric outcomes, focusing on the role of FN

Profilometer Comparison of the Surface Roughness of Four Denture Base Resins: An In Vitro Study

Background: The roughness of denture base materials is mainly affected by inherent material features, the polishing technique, and the operator’s manual skills. The surface irregularities of the denture base resin’s roughness profile is one of the components characterizing the superficial topography of dental prostheses, and it is a critical parameter for describing surface morphology. Generally, the increment of the surface roughness minimizes cleanability and promotes the rate of bacterial adherence, affecting the expression of bacterial adhesins. The purpose of this in vitro study was to investigate the roughness of four commercially available denture base resins employed for removable prosthodontics. Methods: Twenty-five specimens were realized and submitted to observation for three dimensions (vertically, horizontally, 45 ). Average surface roughness (Ra), Rv, Rp, and Rq were measured with a calibrated mechanical roughness tester (Taylor Hobson Surtronic 25; Taylor Hobson, Leicester, UK). Data were analyzed through a Kruskal–Wallis test. Results: Significant differences in Ra between the groups were assessed. Baltic Denture System™ (Merz Dental GmbH; Lütjenburg, Germania) showed a lower surface roughness coefficient and a more homogeneous surface. Conclusions: The functional importance of surface roughness parameters for denture base materials must be explored, not only considering recognized surface features

Roughness analysis on composite materials (Microfilled, nanofilled and silorane) after different finishing and polishing procedures

The finishing and polishing of composite materials affect the restoration lifespan. The market shows a variety of finishing and polishing procedures and the choice among them is conditioned by different factors such as the resulting surface roughness. In the present study, 156 samples were realized with three composite materials,-microfilled, nanofilled and silorane-, and treated with different finishing and polishing procedures. Profilometric analyses were carried out on the samples’ surface, the measured roughness values were submitted to statistical analysis. A complete factorial plan was drawn up and two-way analysis of variance (ANOVA) was carried out to investigate whether the following factors affect the values of roughness: (i) material; (ii) polishing/finishing procedure. Tukey post-hoc test was also conducted to evaluate any statistically significant differences between the material/procedure combinations. The results show that the tested materials do not affect the resulting surface quality but roughness values depend on the finishing/polishing procedure adopted. The procedures that involve: (a) the finishing with medium Sof-Lex discs and (b) the finishing with two tungsten carbide multi-blade milling cutters Q series and UF series are those that allow the lowest values of roughness to be obtained

Temporomandibular disorders and fibromyalgia: A narrative review

Temporomandibular disorder (TMD) and fibromyalgia (FM) have some clinical characteristics in common, for instance the chronic evolution, the pathophysiology incompletely understood and a multifactorial genesis. The incidence and the relationship between TMD and FM patients are the aims of this review. A MEDLINE and Pubmed search was performed for the key words "temporomandibular disorder" AND "fibromyalgia" from 2000 to present. A total of 19 papers were included in our review, accounting for 5449 patients. Ten studies, reporting a total of 4945 patients with TMD, showed that only 16.5% of these patients had diagnosis of FM, whereas 12 studies, reporting a total of 504 patients with FM, demonstrated that 77.0% of these patients had diagnosis of TMD. A comorbid relationship exists between TMD and FM. The complexity of both diseases shows the importance of a multimodal and interdisciplinary