A Statistical Prescription to Estimate Properly Normalized Distributions of Different Particle Species

We describe a statistical method to avoid biased estimation of the content of different particle species. We consider the case when the particle identification information strongly depends on some kinematical variables, whose distributions are unknown and different for each particles species. We show that the proposed procedure provides properly normalized and completely data-driven estimation of the unknown distributions without any a priori assumption on their functional form. Moreover, we demonstrate that the method can be generalized to any kinematical distribution of the particles

Level-3 Calorimetric Resolution available for the Level-1 and Level-2 CDF Triggers

As the Tevatron luminosity increases sophisticated selections are required to be efficient in selecting rare events among a very huge background. To cope with this problem, CDF has pushed the offline calorimeter algorithm reconstruction resolution up to Level 2 and, when possible, even up to Level 1, increasing efficiency and, at the same time, keeping under control the rates. The CDF Run II Level 2 calorimeter trigger is implemented in hardware and is based on a simple algorithm that was used in Run I. This system has worked well for Run II at low luminosity. As the Tevatron instantaneous luminosity increases, the limitation due to this simple algorithm starts to become clear: some of the most important jet and MET (Missing ET) related triggers have large growth terms in cross section at higher luminosity. In this paper, we present an upgrade of the Level 2 Calorimeter system which makes the calorimeter trigger tower information available directly to a CPU allowing more sophisticated algorithms to be implemented in software. Both Level 2 jets and MET can be made nearly equivalent to offline quality, thus significantly improving the performance and flexibility of the jet and MET related triggers. However in order to fully take advantage of the new L2 triggering capabilities having at Level 1 the same L2 MET resolution is necessary. The new Level-1 MET resolution is calculated by dedicated hardware. This paper describes the design, the hardware and software implementation and the performance of the upgraded calorimeter trigger system both at Level 2 and Level 1.Comment: 5 pages, 5 figures,34th International Conference on High Energy Physics, Philadelphia, 200

Constraints on anomalous Higgs boson couplings using production and decay information in the four-lepton final state

A search is performed for anomalous interactions of the recently discovered Higgs boson using matrix element techniques with the information from its decay to four leptons and from associated Higgs boson production with two quark jets in either vector boson fusion or associated production with a vector boson. The data were recorded by the CMS experiment at the LHC at a center-of-mass energy of and correspond to an integrated luminosity of . They are combined with the data collected at center-of-mass energies of 7 and , corresponding to integrated luminosities of 5.1 and , respectively. All observations are consistent with the expectations for the standard model Higgs boson

Measurement of transverse momentum relative to dijet systems in PbPb and pp collisions at sqrt(s_NN) = 2.76 TeV

An analysis of dijet events in PbPb and pp collisions is performed to explore the properties of energy loss by partons traveling in a quark-gluon plasma. Data are collected at a nucleon-nucleon center-of-mass energy of 2.76 TeV at the LHC. The distribution of transverse momentum (p T) surrounding dijet systems is measured by selecting charged particles in different ranges of p T and at different angular cones of pseudorapidity and azimuth. The measurement is performed as a function of centrality of the PbPb collisions, the p T asymmetry of the jets in the dijet pair, and the distance parameter R used in the anti-k T jet clustering algorithm. In events with unbalanced dijets, PbPb collisions show an enhanced multiplicity in the hemisphere of the subleading jet, with the p T imbalance compensated by an excess of low-p T particles at large angles from the jet axes

Search for supersymmetry in electroweak production with photons and large missing transverse energy in pp collisions at sqrt(s) = 8 TeV

Results are reported from a search for supersymmetry with gauge-mediated supersymmetry breaking in electroweak production. Final states with photons and large missing transverse energy ( View the MathML sourceETmiss) were examined. The data sample was collected in pp collisions at View the MathML sources=8TeV with the CMS detector at the LHC and corresponds to 7.4View the MathML sourcefb−1. The analysis focuses on scenarios in which the lightest neutralino has bino- or wino-like components, resulting in decays to photons and gravitinos, where the gravitinos escape undetected. The data were obtained using a specially designed trigger with dedicated low thresholds, providing good sensitivity to signatures with photons, View the MathML sourceETmiss, and low hadronic energy. No excess of events over the standard model expectation is observed. The results are interpreted using the model of general gauge mediation. With the wino mass fixed at 10View the MathML sourceGeV above that of the bino, wino masses below 710View the MathML sourceGeV are excluded at 95% confidence level. Constraints are also set in the context of two simplified models, for which the analysis sets the lowest cross section limits on the electroweak production of supersymmetric particles

Observation of top quark pairs produced in association with a vector boson in pp collisions at sqrt(s) = 8 TeV

Measurements of the cross sections for top quark pairs produced in association with a W or Z boson are presented, using 8TeV pp collision data corresponding to an integrated luminosity of 19.5 fb1, collected by the CMS experiment at the LHC. Final states are selected in which the associated W boson decays to a charged lepton and a neutrino or the Z boson decays to two charged leptons. Signal events are identied by matching reconstructed objects in the detector to specic nal state particles from ttW or ttZ decays. The ttW cross section is measured to be 382+117 102 fb with a signicance of 4.8 standard deviations from the background-only hypothesis. The ttZ cross section is measured to be 242+65 55 fb with a signicance of 6.4 standard deviations from the background-only hypothesis. These measurements are used to set bounds on ve anomalous dimension-six operators that would aect the ttW and ttZ cross sections

Search for standard model production of four top quarks in the lepton + jets channel in pp collisions at sqrt(s) = 8 TeV

A search is presented for standard model (SM) production of four top quarks (tt\uaftt\uaf) in pp collisions in the lepton + jets channel. The data correspond to an integrated luminosity of 19.6 fb 121 recorded at a centre-of-mass energy of 8 TeV with the CMS detector at the CERN LHC. The expected cross section for SM tt\uaftt\uaf production is \u3c3SMtt\uaftt\uaf 481fb. A combination of kinematic reconstruction and multivariate techniques is used to distinguish between the small signal and large background. The data are consistent with expectations of the SM, and an upper limit of 32 fb is set at a 95% confidence level on the cross section for producing four top quarks in the SM, where a limit of 32 \ub1 17 fb is expected

Measurement of the W+W- cross section in pp collisions at sqrt(s) = 8 TeV and limits on anomalous gauge couplings

A measurement of the W boson pair production cross section in proton-proton collisions at $\sqrt{s} = 8$ TeV is presented. The data collected with the CMS detector at the LHC correspond to an integrated luminosity of 19.4$\,\text {fb}^\text {-1}$. The ${{\mathrm{W} }^{+} }\mathrm{W}^{-}$ candidates are selected from events with two charged leptons, electrons or muons, and large missing transverse energy. The measured ${{\mathrm{W} }^{+} }\mathrm{W}^{-}$ cross section is $60.1\pm 0.9\,\text {(stat)} \pm 3.2\,\text {(exp)} \pm 3.1\,\text {(theo)} \pm 1.6\,\text {(lumi)} \text {\,pb} = 60.1\pm 4.8\text {\,pb}$, consistent with the standard model prediction. The ${{\mathrm{W} }^{+} }\mathrm{W}^{-}$ cross sections are also measured in two different fiducial phase space regions. The normalized differential cross section is measured as a function of kinematic variables of the final-state charged leptons and compared with several perturbative QCD predictions. Limits on anomalous gauge couplings associated with dimension-six operators are also given in the framework of an effective field theory. The corresponding 95 % confidence level intervals are $-5.7< c_{\mathrm {WWW}}/\Lambda ^2 < 5.9\,\mathrm{TeV}^{-2}$, $-11.4< c_{\mathrm {W}}/\Lambda ^2 < 5.4\,\mathrm{TeV}^{-2}$, $-29.2< c_{\mathrm {B}}/\Lambda ^2 < 23.9\,\mathrm{TeV}^{-2}$, in the HISZ basis

Search for baryon number violation in top quark decays

A search for baryon number violation (BNV) in top-quark decays is performed using pp collisions produced by the LHC at View the MathML source. The top-quark decay considered in this search results in one light lepton (muon or electron), two jets, but no neutrino in the final state. Data used for the analysis were collected by the CMS detector and correspond to an integrated luminosity of 19.5 fb 121. The event selection is optimized for top quarks produced in pairs, with one undergoing the BNV decay and the other the standard model hadronic decay to three jets. No significant excess of events over the expected yield from standard model processes is observed. The upper limits at 95% confidence level on the branching fraction of the BNV top-quark decay are calculated to be 0.0016 and 0.0017 for the muon and the electron channels, respectively. Assuming lepton universality, an upper limit of 0.0015 results from the combination of the two channels. These limits are the first that have been obtained on a BNV process involving the top quark

Measurement of hadronic cross section and preliminary results on the pion form factor using the radiative return at DAPHNE

In the fixed energy environment of the $e^{+}e^{-}$ collider DA$\Phi$NE, KLOE can measure the cross section of the process $e^{+}e^{-} \to$ hadrons as a function of the hadronic system energy using the radiative return. At energies below 1 GeV, $e^{+}e^{-} \to \rho \to \pi^{+}\pi^{-}$ is the dominating hadronic process. We report here on the status of the analysis for the e^{+}e^{-} \to \ppg channel, which allows to obtain a preliminary measurement of the pion form factor using an integrated luminosity of $\sim73 pb^{-1}$.Comment: Invited talk at the Seventh International Workshop on Tau Lepton Physics (TAU02-WE07), Santa Cruz, Ca, USA, Sept 2002, 9 pages, LaTeX, 9 eps figure