19 research outputs found
Correlation between measures of insulin resistance in fasting and non-fasting blood
<p>Abstract</p> <p>Background</p> <p>Epidemiological investigation of insulin resistance is difficult. Standard measures of insulin resistance require invasive investigations, which are impractical for large-scale studies. Surrogate measures using fasting blood samples have been developed, but even these are difficult to obtain in population-based studies. Measures of insulin resistance have not been validated in non-fasting blood samples. Our objective was to assess the correlations between fasting and non-fasting measures of insulin resistance/sensitivity.</p> <p>Methods</p> <p>Fasting and non-fasting measurements of metabolic function were compared in 30 volunteers (15 male) aged 28 to 48 years. Participants provided a morning blood sample after an overnight fast and a second sample approximately 4 hours after lunch on the same day.</p> <p>Results</p> <p>Non-fasting levels of the adipokines leptin, adiponectin, and leptin:adiponectin ratios were not significantly different and highly correlated with fasting values (r values 0.95, 0.96, and 0.95 respectively, P values < 0.001). There were moderate correlations between fasting and non-fasting estimates of insulin sensitivity using the McAuley (r = 0.60, P = 0.001) and QUICKI formulae (r = 0.39, P = 0.037). The HOMA-IR estimate of insulin resistance was also moderately correlated (r = 0.45, P = 0.016).</p> <p>Conclusions</p> <p>Semi-fasting measures of leptin, adiponectin, and leptin:adiponectin ratios correlate closely with fasting values and are likely to be sufficient for population-based research. Other measures of insulin resistance or sensitivity in semi-fasted blood samples are moderately correlated with values obtained after an overnight fast. These estimates of insulin resistance/sensitivity may also be adequate for many epidemiological studies and would avoid the difficulties of obtaining fasting blood samples.</p
Readout of a quantum processor with high dynamic range Josephson parametric amplifiers
We demonstrate a high dynamic range Josephson parametric amplifier (JPA) in
which the active nonlinear element is implemented using an array of rf-SQUIDs.
The device is matched to the 50 environment with a Klopfenstein-taper
impedance transformer and achieves a bandwidth of 250-300 MHz, with input
saturation powers up to -95 dBm at 20 dB gain. A 54-qubit Sycamore processor
was used to benchmark these devices, providing a calibration for readout power,
an estimate of amplifier added noise, and a platform for comparison against
standard impedance matched parametric amplifiers with a single dc-SQUID. We
find that the high power rf-SQUID array design has no adverse effect on system
noise, readout fidelity, or qubit dephasing, and we estimate an upper bound on
amplifier added noise at 1.6 times the quantum limit. Lastly, amplifiers with
this design show no degradation in readout fidelity due to gain compression,
which can occur in multi-tone multiplexed readout with traditional JPAs.Comment: 9 pages, 8 figure
Measurement-Induced State Transitions in a Superconducting Qubit: Within the Rotating Wave Approximation
Superconducting qubits typically use a dispersive readout scheme, where a
resonator is coupled to a qubit such that its frequency is qubit-state
dependent. Measurement is performed by driving the resonator, where the
transmitted resonator field yields information about the resonator frequency
and thus the qubit state. Ideally, we could use arbitrarily strong resonator
drives to achieve a target signal-to-noise ratio in the shortest possible time.
However, experiments have shown that when the average resonator photon number
exceeds a certain threshold, the qubit is excited out of its computational
subspace, which we refer to as a measurement-induced state transition. These
transitions degrade readout fidelity, and constitute leakage which precludes
further operation of the qubit in, for example, error correction. Here we study
these transitions using a transmon qubit by experimentally measuring their
dependence on qubit frequency, average photon number, and qubit state, in the
regime where the resonator frequency is lower than the qubit frequency. We
observe signatures of resonant transitions between levels in the coupled
qubit-resonator system that exhibit noisy behavior when measured repeatedly in
time. We provide a semi-classical model of these transitions based on the
rotating wave approximation and use it to predict the onset of state
transitions in our experiments. Our results suggest the transmon is excited to
levels near the top of its cosine potential following a state transition, where
the charge dispersion of higher transmon levels explains the observed noisy
behavior of state transitions. Moreover, occupation in these higher energy
levels poses a major challenge for fast qubit reset
Overcoming leakage in scalable quantum error correction
Leakage of quantum information out of computational states into higher energy
states represents a major challenge in the pursuit of quantum error correction
(QEC). In a QEC circuit, leakage builds over time and spreads through
multi-qubit interactions. This leads to correlated errors that degrade the
exponential suppression of logical error with scale, challenging the
feasibility of QEC as a path towards fault-tolerant quantum computation. Here,
we demonstrate the execution of a distance-3 surface code and distance-21
bit-flip code on a Sycamore quantum processor where leakage is removed from all
qubits in each cycle. This shortens the lifetime of leakage and curtails its
ability to spread and induce correlated errors. We report a ten-fold reduction
in steady-state leakage population on the data qubits encoding the logical
state and an average leakage population of less than
throughout the entire device. The leakage removal process itself efficiently
returns leakage population back to the computational basis, and adding it to a
code circuit prevents leakage from inducing correlated error across cycles,
restoring a fundamental assumption of QEC. With this demonstration that leakage
can be contained, we resolve a key challenge for practical QEC at scale.Comment: Main text: 7 pages, 5 figure
Measurement-induced entanglement and teleportation on a noisy quantum processor
Measurement has a special role in quantum theory: by collapsing the
wavefunction it can enable phenomena such as teleportation and thereby alter
the "arrow of time" that constrains unitary evolution. When integrated in
many-body dynamics, measurements can lead to emergent patterns of quantum
information in space-time that go beyond established paradigms for
characterizing phases, either in or out of equilibrium. On present-day NISQ
processors, the experimental realization of this physics is challenging due to
noise, hardware limitations, and the stochastic nature of quantum measurement.
Here we address each of these experimental challenges and investigate
measurement-induced quantum information phases on up to 70 superconducting
qubits. By leveraging the interchangeability of space and time, we use a
duality mapping, to avoid mid-circuit measurement and access different
manifestations of the underlying phases -- from entanglement scaling to
measurement-induced teleportation -- in a unified way. We obtain finite-size
signatures of a phase transition with a decoding protocol that correlates the
experimental measurement record with classical simulation data. The phases
display sharply different sensitivity to noise, which we exploit to turn an
inherent hardware limitation into a useful diagnostic. Our work demonstrates an
approach to realize measurement-induced physics at scales that are at the
limits of current NISQ processors
Suppressing quantum errors by scaling a surface code logical qubit
Practical quantum computing will require error rates that are well below what
is achievable with physical qubits. Quantum error correction offers a path to
algorithmically-relevant error rates by encoding logical qubits within many
physical qubits, where increasing the number of physical qubits enhances
protection against physical errors. However, introducing more qubits also
increases the number of error sources, so the density of errors must be
sufficiently low in order for logical performance to improve with increasing
code size. Here, we report the measurement of logical qubit performance scaling
across multiple code sizes, and demonstrate that our system of superconducting
qubits has sufficient performance to overcome the additional errors from
increasing qubit number. We find our distance-5 surface code logical qubit
modestly outperforms an ensemble of distance-3 logical qubits on average, both
in terms of logical error probability over 25 cycles and logical error per
cycle ( compared to ). To investigate
damaging, low-probability error sources, we run a distance-25 repetition code
and observe a logical error per round floor set by a single
high-energy event ( when excluding this event). We are able
to accurately model our experiment, and from this model we can extract error
budgets that highlight the biggest challenges for future systems. These results
mark the first experimental demonstration where quantum error correction begins
to improve performance with increasing qubit number, illuminating the path to
reaching the logical error rates required for computation.Comment: Main text: 6 pages, 4 figures. v2: Update author list, references,
Fig. S12, Table I
Non-Abelian braiding of graph vertices in a superconducting processor
Indistinguishability of particles is a fundamental principle of quantum
mechanics. For all elementary and quasiparticles observed to date - including
fermions, bosons, and Abelian anyons - this principle guarantees that the
braiding of identical particles leaves the system unchanged. However, in two
spatial dimensions, an intriguing possibility exists: braiding of non-Abelian
anyons causes rotations in a space of topologically degenerate wavefunctions.
Hence, it can change the observables of the system without violating the
principle of indistinguishability. Despite the well developed mathematical
description of non-Abelian anyons and numerous theoretical proposals, the
experimental observation of their exchange statistics has remained elusive for
decades. Controllable many-body quantum states generated on quantum processors
offer another path for exploring these fundamental phenomena. While efforts on
conventional solid-state platforms typically involve Hamiltonian dynamics of
quasi-particles, superconducting quantum processors allow for directly
manipulating the many-body wavefunction via unitary gates. Building on
predictions that stabilizer codes can host projective non-Abelian Ising anyons,
we implement a generalized stabilizer code and unitary protocol to create and
braid them. This allows us to experimentally verify the fusion rules of the
anyons and braid them to realize their statistics. We then study the prospect
of employing the anyons for quantum computation and utilize braiding to create
an entangled state of anyons encoding three logical qubits. Our work provides
new insights about non-Abelian braiding and - through the future inclusion of
error correction to achieve topological protection - could open a path toward
fault-tolerant quantum computing