Evaluation of closed cubic failure criterion for graphite/epoxy laminates

An analytical method has been developed to ensure closure of the cubic form of the tensor polynomial strength criterion. The intrinsic complexity of the cubic function is such that special conditions must be met to close the failure surface in three-dimensional stress space. These requirements are derived in terms of non-intersecting conditions for asymptotes and an asymptotic plane. To demonstrate the validity of this approach, closed failure surfaces were derived for two graphite/epoxy material systems (3M SP288-T300 and IM7 8551-7). The agreement of test data with this model clearly shows that it is possible to use a higher order cubic failure theory with confidence

Analysis of LDEF micrometeoroid/debris data and damage to composite materials

This report presented published LDEF micrometeoroid/debris impact data in a nomogram format useful for estimating the total number of hits that could be expected on a space structure as a function of time in orbit, angular location relative to ram, and exposed surface area. Correction factors accounting for different altitudes are given. These are normalized to the average LDEF altitude. Examples on how to use the nomograph are also included. In addition, impact data and damage areas observed on composite laminates (experiment AO 180) are discussed

Outgassing and dimensional changes of polymer matrix composites in space

A thermal-vacuum outgassing model and test protocol for predicting outgassing times and dimensional changes for polymer matrix composites is described. Experimental results derived from a 'control' sample are used to provide the basis for analytical predictions to compare with the outgassing response of Long Duration Exposure Facility (LDEF) flight samples

Evaluation of failure criterion for graphite/epoxy fabric laminates

The development and application of the tensor polynomial failure criterion for composite laminate analysis is described. Emphasis is given to the fabrication and testing of Narmco Rigidite 5208-WT300, a plain weave fabric of Thornel 300 Graphite fibers impregnated with Narmco 5208 Resin. The quadratic-failure criterion with F sub 12=0 provides accurate estimates of failure stresses for the graphite/epoxy investigated. The cubic failure criterion was recast into an operationally easier form, providing design curves that can be applied to laminates fabricated from orthotropic woven fabric prepregs. In the form presented, no interaction strength tests are required, although recourse to the quadratic model and the principal strength parameters is necessary. However, insufficient test data exist at present to generalize this approach for all prepreg constructions, and its use must be restricted to the generic materials and configurations investigated to date

Experimental evaluation of the tensor polynomial criterion for designing composite structures

A comprehensive experimental and analytical evaluation of the tensor polynomial failure criterion was undertaken to determine its capability for predicting the ultimate strength of a composite limina subject to a plane stress state. Results are presented demonstrating that a quadratic formulation is too conservative and a cubic representation is required. Strength comparisons with test data derived from glass/epoxy and graphite/epoxy tubular specimens are also provided to validate the cubic strength criterion. Environmental effects including ambient temperature, exposure to vacuum, length of post-cure time, and rate of cool down were also investigated. Behavior changes associated with polymer (epoxy) matrix composites were determined in terms of variations in stiffness and tensile strength

Additional results on space environmental effects on polymer matrix composites: Experiment A0180

Additional experimental results on the atomic oxygen erosion of boron, Kevlar, and graphite fiber reinforced epoxy matrix composites are presented. Damage of composite laminates due to micrometeoroid/debris impacts is also examined with particular emphasis on the relationship between damage area and actual hole size due to particle penetration. Special attention is given to one micrometeoroid impact on an aluminum base plate which resulted in ejecta visible on an adjoining vertical flange structure

ExoMol line lists XXVIII: The rovibronic spectrum of AlH

A new line list for AlH is produced. The WYLLoT line list spans two electronic states $X\,{}^1\Sigma^+$ and $A\,{}^1\Pi$. A diabatic model is used to model the shallow potential energy curve of the $A\,{}^1\Pi$ state, which has a strong pre-dissociative character with only two bound vibrational states. Both potential energy curves are empirical and were obtained by fitting to experimentally derived energies of the $X\,{}^1\Sigma^+$ and $A\,{}^1\Pi$ electronic states using the diatomic nuclear motion codes Level and Duo. High temperature line lists plus partition functions and lifetimes for three isotopologues $^{27}$AlH, $^{27}$AlD and $^{26}$AlH were generated using ab initio dipole moments. The line lists cover both the $X$--$X$ and $A$--$X$ systems and are made available in electronic form at the CDS and ExoMol databases

Observations of the diffuse UV radiation field

Spectra are presented for the diffuse UV radiation field between 1250 to 3100 A from eight different regions of the sky, which were obtained with the Johns Hopkins UVX experiment. UVX flew aboard the Space Shuttle Columbia (STS-61C) in January 1986 as part of the Get-Away Special project. The experiment consisted of two 1/4 m Ebert-Fastie spectrometers, covering the spectral range 1250 to 1700 A at 17 A resolution and 1600 to 3100 A at 27 A resolution, respectively, with a field of view of 4 x .25 deg, sufficiently small to pick out regions of the sky with no stars in the line of sight. Values were found for the diffuse cosmic background ranging in intensity from 300 to 900 photons/sq cm/sec/sr/A. The cosmic background is spectrally flat from 1250 to 3100 A, within the uncertainties of each spectrometer. The zodiacal light begins to play a significant role in the diffuse radiation field above 2000 A, and its brightness was determined relative to the solar emission. Observed brightnesses of the zodiacal light in the UV remain almost constant with ecliptic latitude, unlike the declining visible brightnesses, possibly indicating that those (smaller) grains responsible for the UV scattering have a much more uniform distribution with distance from the ecliptic plane than do those grains responsible for the visible scattering

ExoMol line lists - III. An improved hot rotation-vibration line list for HCN and HNC

A revised rotation-vibration line list for the combined hydrogen cyanide (HCN)/hydrogen isocyanide (HNC) system is presented. The line list uses ab initio transition intensities calculated previously and extensive data sets of recently measured experimental energy levels. The resulting line list has significantly more accurate wavelengths than previous ones for these systems. An improved value for the separation between HCN and HNC is adopted, leading to an approximately 25 per cent lower predicted thermal population of HNC as a function of temperature in the key 2000 to 3000 K region. Temperature-dependent partition functions and equilibrium constants are presented. The line lists are validated by comparison with laboratory spectra and are presented in full as supplementary data to the article and at www.exomol.com

Soft-tissue specimens from pre-European extinct birds of New Zealand

We provide the first complete review of soft tissue remains from New Zealand birds that became extinct prior to European settlement (c. AD 1800). These rare specimens allow insights into the anatomy and appearance of the birds that are not attainable from bones. Our review includes previously unpublished records of ‘lost’ specimens, and descriptions of recently discovered specimens such as the first evidence of soft tissues from the South Island goose (Cnemiornis calcitrans). Overall, the soft tissue remains are dominated by moa (with specimens from each of the six genera), but also include specimens from Finsch's duck (Chenonetta finschi) and the New Zealand owlet-nightjar (Aegotheles novaezealandiae). All desiccated soft tissue specimens that have radiocarbon or stratigraphic dates are late Holocene in age, and most have been found in the semi-arid region of Central Otago