Analysis of Factors Affecting Farmers’ Willingness to Adopt Switchgrass Production

In the United States, biomass is the largest source of renewable energy accounting for over 3 percent of the energy consumed domestically and is currently the only source for liquid, renewable, transportation fuels. Continued development of biomass as a renewable energy source is being driven in large part by the Energy Independence and Security Act of 2007, which mandates that by 2022 at least 36 billion gallons of fuel ethanol be produced, with at least 16 billion gallons being derived from cellulose, hemi-cellulose, or lignin. However, the market for cellulosic biofuels is still under development. As such, little is known about producer response to feedstock prices paid for dedicated energy crops. While there have been some studies done on factors that determine farmers’ willingness to produce switchgrass, these have been very regional in nature. This study will provide information regarding potential switchgrass adoption by agricultural producers in twelve southeastern states. The objectives of this research are 1) to determine the likelihood of farmers growing switchgrass as a biomass feedstock and the acres they would be willing to devote to switchgrass production and 2) to evaluate some of the factors that are likely to influence these decisions, including the price of switchgrass.Switchgrass, Farmer Adoption, Crop Production/Industries, Research and Development/Tech Change/Emerging Technologies, Resource /Energy Economics and Policy, Q12, Q16,

The human hand and foot in evolution and art : the effects of wearing footwear

The structures of the human hands and feet are shaped by evolution and its effects on the brain, skeleton and other structures, and on behavior. We used measurements obtained of hands and feet from living humans in Europe, the Americas (South and North) and Australia and images of hands and feet in cave art, paintings, and photographs obtained from the Web including some from Africa. We used the ratios of the third finger/width of hand and second toe/width of foot. We hypothesized that hand ratios would not have changed over millennia whereas, because of the use of footwear and mechanical locomotion, the ratios obtained from feet could have changed significantly. Here we report that statistical analyses and modeling confirmed our initial hypothesi

Concepts for manned lunar habitats

The design philosophy that will guide the design of early lunar habitats will be based on a compromise between the desired capabilities of the base and the economics of its development and implantation. Preferred design will be simple, make use of existing technologies, require the least amount of lunar surface preparation, and minimize crew activity. Three concepts for an initial habitat supporting a crew of four for 28 to 30 days are proposed. Two of these are based on using Space Station Freedom structural elements modified for use in a lunar-gravity environment. A third concept is proposed that is based on an earlier technology based on expandable modules. The expandable modules offer significant advantages in launch mass and packaged volume reductions. It appears feasible to design a transport spacecraft lander that, once landed, can serve as a habitat and a stand-off for supporting a regolith environmental shield. A permanent lunar base habitat supporting a crew of twelve for an indefinite period can be evolved by using multiple initial habitats. There appears to be no compelling need for an entirely different structure of larger volume and increased complexity of implantation

A Rat Body Phantom for Radiation Analysis

To reduce the uncertainties associated with estimating the biological effects of ionizing radiation in tissue, researchers rely on laboratory experiments in which mono-energetic, single specie beams are applied to cell cultures, insects, and small animals. To estimate the radiation effects on astronauts in deep space or low Earth orbit, who are exposed to mixed field broad spectrum radiation, these experimental results are extrapolated and combined with other data to produce radiation quality factors, radiation weighting factors, and other risk related quantities for humans. One way to reduce the uncertainty associated with such extrapolations is to utilize analysis tools that are applicable to both laboratory and space environments. The use of physical and computational body phantoms to predict radiation exposure and its effects is well established and a wide range of human and non-human phantoms are in use today. In this paper, a computational rat phantom is presented, as well as a description of the process through which that phantom has been coupled to existing radiation analysis tools. Sample results are presented for two space radiation environments

Temperature dependence of the interlayer magnetoresistance of quasi-one-dimensional Fermi liquids at the magic angles

The interlayer magnetoresistance of a quasi-one-dimensional Fermi liquid is considered for the case of a magnetic field that is rotated within the plane perpendicular to the most-conducting direction. Within semi-classical transport theory dips in the magnetoresistance occur at integer amgic angles only when the electronic dispersion parallel to the chains is nonlinear. If the field direction is fixed at one of the magic angles and the temperature is varied the resulting variation of the scattering rate can lead to a non-monotonic variation of the interlayer magnetoresistance with temperature. Although the model considered here gives a good description of some of the properties of the Bechgaard salts, (TMTSF)2PF6 for pressures less than 8kbar and (TMTSF)2ClO4 it gives a poor description of their properties when the field is parallel to the layers and of the intralayer transport.Comment: 10pages, RevTeX + epsf, 3 figure

Analysis of Mass Averaged Tissue Doses in CAM, CAF, MAX, and FAX

To estimate astronaut health risk due to space radiation, one must have the ability to calculate exposure-related quantities averaged over specific organs and tissue types. In this study, we first examine the anatomical properties of the Computerized Anatomical Man (CAM), Computerized Anatomical Female (CAF), Male Adult voXel (MAX), and Female Adult voXel (FAX) models by comparing the masses of various tissues to the reference values specified by the International Commission on Radiological Protection (ICRP). Major discrepancies are found between the CAM and CAF tissue masses and the ICRP reference data for almost all of the tissues. We next examine the distribution of target points used with the deterministic transport code HZETRN to compute mass averaged exposure quantities. A numerical algorithm is used to generate multiple point distributions for many of the effective dose tissues identified in CAM, CAF, MAX, and FAX. It is concluded that the previously published CAM and CAF point distributions were under-sampled and that the set of point distributions presented here should be adequate for future studies involving CAM, CAF, MAX, or FAX. It is concluded that MAX and FAX are more accurate than CAM and CAF for space radiation analyses

A Review of Studies Evaluating Insecticide Barrier Treatments for Mosquito Control From 1944 to 2018

Background and Purpose: Barrier insecticide treatments have a long history in mosquito control programs but have been used more frequently in the United States in recent years for control of invasive “backyard� species (eg, Aedes albopictus) and increases in incidence of vector-borne diseases (eg, Zika). Methods: We reviewed the published literature for studies investigating barrier treatments for mosquito control during the last 74 years (1944-2018). We searched databases such as PubMed, Web of Science, and Google Scholar to retrieve worldwide literature on barrier treatments. Results: Forty-four studies that evaluated 20 active ingredients (AIs) and 21 formulated products against multiple mosquito species are included. Insecticides investigated for efficacy included organochlorines (dichlorodiphenyltrichloroethane [DDT], β-hexachlorocyclohexane [BHC]), organophosphates (malathion), and pyrethroids (bifenthrin, deltamethrin, permethrin, lambda-cyhalothrin) as AIs. Study design varied with multiple methods used to evaluate effectiveness of barrier treatments. Barrier treatments were effective at lowering mosquito populations although there was variation between studies and for different mosquito species. Factors other than AI, such as exposure to rainfall and application equipment used, also influenced control efficacy. Conclusions: Many of the basic questions on the effectiveness of barrier insecticide applications have been answered, but several important details still must be investigated to improve precision and impact on vector-borne pathogen transmission. Recommendations are made to assist future evaluations of barrier treatments for mosquito control and to limit the potential development of insecticide resistance