Comparison of collapsing methods for the statistical analysis of rare variants

Novel technologies allow sequencing of whole genomes and are considered as an emerging approach for the identification of rare disease-associated variants. Recent studies have shown that multiple rare variants can explain a particular proportion of the genetic basis for disease. Following this assumption, we compare five collapsing approaches to test for groupwise association with disease status, using simulated data provided by Genetic Analysis Workshop 17 (GAW17). Variants are collapsed in different scenarios per gene according to different minor allele frequency (MAF) thresholds and their functionality. For comparing the different approaches, we consider the family-wise error rate and the power. Most of the methods could maintain the nominal type I error levels well for small MAF thresholds, but the power was generally low. Although the methods considered in this report are common approaches for analyzing rare variants, they performed poorly with respect to the simulated disease phenotype in the GAW17 data set

Are quantitative trait-dependent sampling designs cost-effective for analysis of rare and common variants?

Use of trait-dependent sampling designs in whole-genome association studies of sequence data can reduce total sequencing costs with modest losses of statistical efficiency. In a quantitative trait (QT) analysis of data from the Genetic Analysis Workshop 17 mini-exome for unrelated individuals in the Asian subpopulation, we investigate alternative designs that sequence only 50% of the entire cohort. In addition to a simple random sampling design, we consider extreme-phenotype designs that are of increasing interest in genetic association analysis of QTs, especially in studies concerned with the detection of rare genetic variants. We also evaluate a novel sampling design in which all individuals have a nonzero probability of being selected into the sample but in which individuals with extreme phenotypes have a proportionately larger probability. We take differential sampling of individuals with informative trait values into account by inverse probability weighting using standard survey methods which thus generalizes to the source population. In replicate 1 data, we applied the designs in association analysis of Q1 with both rare and common variants in the FLT1 gene, based on knowledge of the generating model. Using all 200 replicate data sets, we similarly analyzed Q1 and Q4 (which is known to be free of association with FLT1) to evaluate relative efficiency, type I error, and power. Simulation study results suggest that the QT-dependent selection designs generally yield greater than 50% relative efficiency compared to using the entire cohort, implying cost-effectiveness of 50% sample selection and worthwhile reduction of sequencing costs

Application of collapsing methods for continuous traits to the Genetic Analysis Workshop 17 exome sequence data

Genetic Analysis Workshop 17 used real sequence data from the 1000 Genomes Project and simulated phenotypes influenced by a large number of rare variants. Our aim is to evaluate the performance of various collapsing methods that were developed for analysis of multiple rare variants. We apply collapsing methods to continuous phenotypes Q1 and Q2 for all 200 replicates of the unrelated individuals data. Within each gene, we collapse (1) all SNPs, (2) all SNPs with minor allele frequency (MAF) < 0.05, and (3) nonsynonymous SNPs with MAF < 0.05. We consider two tests when collapsing variants: using the proportion of variants and using the presence/absence of any variant. We also compare our results to a single-marker analysis using PLINK. For phenotype Q1, the proportion test for collapsing rare nonsynonymous SNPs often performed the best. Two genes (FLT1 and KDR) had statistically significant results. A single-marker analysis using PLINK also provided statistically significant results for some SNPs within these two genes. For phenotype Q2, collapsing rare nonsynonymous SNPs performed the best, with almost no difference between proportion and presence tests. However, neither collapsing methods nor a single-marker analysis provided statistically significant results at the true genes for Q2. We also found that a large number of noncausal genes had high correlations with causal genes for Q1 and Q2, which may account for inflated false positives

Enrichment analysis of genetic association in genes and pathways by aggregating signals from both rare and common variants

New high-throughput sequencing technologies have brought forth opportunities for unbiased analysis of thousands of rare genomic variants in genome-wide association studies of complex diseases. Because it is hard to detect single rare variants with appreciable effect sizes at the population level, existing methods mostly aggregate effects of multiple markers by collapsing the rare variants in genes (or genomic regions). We hypothesize that a higher level of aggregation can further improve association signal strength. Using the Genetic Analysis Workshop 17 simulated data, we test a two-step strategy that first applies a collapsing method in a gene-level analysis and then aggregates the gene-level test results by performing an enrichment analysis in gene sets. We find that the gene set approach which combines signals across multiple genes outperforms testing individual genes separately and that the power of the gene set enrichment test is further improved by proper adjustment of statistics to account for gene-wise differences

Identification of multiple rare variants associated with a disease

Identifying rare variants that are responsible for complex disease has been promoted by advances in sequencing technologies. However, statistical methods that can handle the vast amount of data generated and that can interpret the complicated relationship between disease and these variants have lagged. We apply a zero-inflated Poisson regression model to take into account the excess of zeros caused by the extremely low frequency of the 24,487 exonic variants in the Genetic Analysis Workshop 17 data. We grouped the 697 subjects in the data set as Europeans, Asians, and Africans based on principal components analysis and found the total number of rare variants per gene for each individual. We then analyzed these collapsed variants based on the assumption that rare variants are enriched in a group of people affected by a disease compared to a group of unaffected people. We also tested the hypothesis with quantitative traits Q1, Q2, and Q4. Analyses performed on the combined 697 individuals and on each ethnic group yielded different results. For the combined population analysis, we found that UGT1A1, which was not part of the simulation model, was associated with disease liability and that FLT1, which was a causal locus in the simulation model, was associated with Q1. Of the causal loci in the simulation models, FLT1 and KDR were associated with Q1 and VNN1 was correlated with Q2. No significant genes were associated with Q4. These results show the feasibility and capability of our new statistical model to detect multiple rare variants influencing disease risk

Two-stage study designs combining genome-wide association studies, tag single-nucleotide polymorphisms, and exome sequencing: accuracy of genetic effect estimates

Genome-wide association studies (GWAS) test for disease-trait associations and estimate effect sizes at tag single-nucleotide polymorphisms (SNPs), which imperfectly capture variation at causal SNPs. Sequencing studies can examine potential causal SNPs directly; however, sequencing the whole genome or exome can be prohibitively expensive. Costs can be limited by using a GWAS to detect the associated region(s) at tag SNPs followed by targeted sequencing to identify and estimate the effect size of the causal variant. Genetic effect estimates obtained from association studies can be inflated because of a form of selection bias known as the winner’s curse. Conversely, estimates at tag SNPs can be attenuated compared to the causal SNP because of incomplete linkage disequilibrium. These two effects oppose each other. Analysis of rare SNPs further complicates our understanding of the winner’s curse because rare SNPs are difficult to tag and analysis can involve collapsing over multiple rare variants. In two-stage analysis of Genetic Analysis Workshop 17 simulated data sets, we find that selection at the tag SNP produces upward bias in the estimate of effect at the causal SNP, even when the tag and causal SNPs are not well correlated. The bias similarly carries through to effect estimates for rare variant summary measures. Replication studies designed with sample sizes computed using biased estimates will be under-powered to detect a disease-causing variant. Accounting for bias in the original study is critical to avoid discarding disease-associated SNPs at follow up

Evaluating aggregate effects of rare and common variants in the 1000 Genomes Project exon sequencing data using latent variable structural equation modeling

Methods that can evaluate aggregate effects of rare and common variants are limited. Therefore, we applied a two-stage approach to evaluate aggregate gene effects in the 1000 Genomes Project data, which contain 24,487 single-nucleotide polymorphisms (SNPs) in 697 unrelated individuals from 7 populations. In stage 1, we identified potentially interesting genes (PIGs) as those having at least one SNP meeting Bonferroni correction using univariate, multiple regression models. In stage 2, we evaluate aggregate PIG effects on trait, Q1, by modeling each gene as a latent construct, which is defined by multiple common and rare variants, using the multivariate statistical framework of structural equation modeling (SEM). In stage 1, we found that PIGs varied markedly between a randomly selected replicate (replicate 137) and 100 other replicates, with the exception of FLT1. In stage 1, collapsing rare variants decreased false positives but increased false negatives. In stage 2, we developed a good-fitting SEM model that included all nine genes simulated to affect Q1 (FLT1, KDR, ARNT, ELAV4, FLT4, HIF1A, HIF3A, VEGFA, VEGFC) and found that FLT1 had the largest effect on Q1 (βstd = 0.33 ± 0.05). Using replicate 137 estimates as population values, we found that the mean relative bias in the parameters (loadings, paths, residuals) and their standard errors across 100 replicates was on average, less than 5%. Our latent variable SEM approach provides a viable framework for modeling aggregate effects of rare and common variants in multiple genes, but more elegant methods are needed in stage 1 to minimize type I and type II error

An aggregating U-Test for a genetic association study of quantitative traits

We propose a novel aggregating U-test for gene-based association analysis. The method considers both rare and common variants. It adaptively searches for potential disease-susceptibility rare variants and collapses them into a single “supervariant.” A forward U-test is then used to assess the joint association of the supervariant and other common variants with quantitative traits. Using 200 simulated replicates from the Genetic Analysis Workshop 17 mini-exome data, we compare the performance of the proposed method with that of a commonly used approach, QuTie. We find that our method has an equivalent or greater power than QuTie to detect nine genes that influence the quantitative trait Q1. This new approach provides a powerful tool for detecting both common and rare variants associated with quantitative traits

Two-stage analyses of sequence variants in association with quantitative traits

We propose a two-stage design for the analysis of sequence variants in which a proportion of genes that show some evidence of association are identified initially and then followed up in an independent data set. We compare two different approaches. In both approaches the same summary measure (total number of minor alleles) is used for each gene in the initial analysis. In the first (simple) approach the same summary measure is used in the analysis of the independent data set. In the second (alternative) approach a more specific hypothesis is formed for the second stage; the summary measure used is the count of minor alleles in only those variants that in the initial data showed the same direction of association as was seen overall. We applied the methods to the simulated quantitative traits of Genetic Analysis Workshop 17, blind to the simulation model, and then evaluated their performance once the underlying model was known. Performance was similar for most genes, but the simple strategy considerably out-performed the alternative strategy for one gene, where most of the effect was due to very rare variants; this suggests that the alternative approach would not be advisable when the effect is seen in very rare variants. Further simulations are needed to investigate the potential superior power of the alternative method when some variants within a gene have opposing effects. Overall, the power to detect associations was low; this was also true when using a more powerful joint analysis that combined the two stages of the study

Enhancing the discovery of rare disease variants through hierarchical modeling

Advances in next-generation sequencing technology are enabling researchers to capture a comprehensive picture of genomic variation across large numbers of individuals with unprecedented levels of efficiency. The main analytic challenge in disease mapping is how to mine the data for rare causal variants among a sea of neutral variation. To achieve this goal, investigators have proposed a number of methods that exploit biological knowledge. In this paper, I propose applying a Bayesian stochastic search variable selection algorithm in this context. My multivariate method is inspired by the combined multivariate and collapsing method. In this proposed method, however, I allow an arbitrary number of different sources of biological knowledge to inform the model as prior distributions in a two-level hierarchical model. This allows rare variants with similar prior distributions to share evidence of association. Using the 1000 Genomes Project single-nucleotide polymorphism data provided by Genetic Analysis Workshop 17, I show that through biologically informative prior distributions, some power can be gained over noninformative prior distributions