Development of improved lithium tantalate pyroelectric detectors

A program was undertaken to increase the detectivity of LiTaO3 pyroelectric detectors to meet a performance requirement of D star (500 K, 15 Hz)=4x10 to the 9th power cm Hz1/2W-1. Emphasis was placed on reduction of the thermal conductance of the detector element to its surroundings, thinning the detector wafer to a thickness less than 3 micrometers, and increasing the absorptivity of the standard metallic film coatings. During the program, thermal conductance was reduced 41 percent through the use of reticulated (slotted) structures. Self-supported detector wafers less than 2 micrometers thick were fabricated. Multiple layer coatings, including an AR coating, with 16 percent more absorptance, were designed and fabricated. Later refinements in the multilayer design program have absorptivities of 75-80 percent, but detectors with these coatings had to be more than 2 micrometers thick because of a mismatch in the thermal expansion coefficients with LiTaO3

Spatial and temporal filtering of a 10-W Nd:YAG laser with a Fabry-Perot ring-cavity premode cleaner

We report on the use of a fixed-spacer Fabry–Perot ring cavity to filter spatially and temporally a 10-W laser-diode-pumped Nd:YAG master-oscillator power amplifier. The spatial filtering leads to a 7.6-W TEMinfinity beam with 0.1% higher-order transverse mode content. The temporal filtering reduces the relative power fluctuations at 10 MHz to 2.8 x 10^-/sqrtHz, which is 1 dB above the shot-noise limit for 50 mA of detected photocurrent

W-band 0.3W PHEMT MMIC power amplifier module

A compact (1.8 by 3.0 by 3.8 cm) WR-10 waveguide amplifier module providing 310-mW power output, 20-dB gain, and 5 GHz of 1-dB bandwidth at a center frequency of 96 GHz is described. The module is comprised of 22 identical PHEMT chips, 4-way microstrip power combiners and dividers, and a 4-way waveguide power combiner

Investigating the medium range order in amorphous Ta₂O₅ coatings

Ion-beam sputtered amorphous heavy metal oxides, such as Ta2O5, are widely used as the high refractive index layer of highly reflective dielectric coatings. Such coatings are used in the ground based Laser Interferometer Gravitational-wave Observatory (LIGO), in which mechanical loss, directly related to Brownian thermal noise, from the coatings forms an important limit to the sensitivity of the LIGO detector. It has previously been shown that heat-treatment and TiO2 doping of amorphous Ta2O5 coatings causes significant changes to the levels of mechanical loss measured and is thought to result from changes in the atomic structure. This work aims to find ways to reduce the levels of mechanical loss in the coatings by understanding the atomic structure properties that are responsible for it, and thus helping to increase the LIGO detector sensitivity. Using a combination of Reduced Density Functions (RDFs) from electron diffraction and Fluctuation Electron Microscopy (FEM), we probe the medium range order (in the 2-3 nm range) of these amorphous coatings

Elastic response of [111]-tunneling impurities

We study the dynamic response of a [111] quantum impurity, such as lithium or cyanide in alkali halides, with respect to an external field coupling to the elastic quadrupole moment. Because of the particular level structure of a eight-state system on a cubic site, the elastic response function shows a biexponential relaxation feature and a van Vleck type contribution with a resonance frequency that is twice the tunnel frequency $\Delta/\hbar$. This basically differs from the dielectric response that does not show relaxation. Moreover, we show that the elastic response of a [111] impurity cannot be reduced to that of a two-level system. In the experimental part, we report on recent sound velocity and internal friction measurements on KCl doped with cyanide at various concentrations. At low doping (45 ppm) we find the dynamics of a single [111] impurity, whereas at higher concentrations (4700 ppm) the elastic response rather indicates strongly correlated defects. Our theoretical model provides a good description of the temperature dependence of $\delta v/v$ and $Q^{-1}$ at low doping, in particular the relaxation peaks, the absolute values of the amplitude, and the resonant contributions. From our fits we obtain the value of the elastic deformation potential $\gamma_t=0.192$ eV.Comment: 19 pages, 5 figure

W-band 0.3W PHEMT MMIC power amplifier module

A compact (1.8 by 3.0 by 3.8 cm) WR-10 waveguide amplifier module providing 310-mW power output, 20-dB gain, and 5 GHz of 1-dB bandwidth at a center frequency of 96 GHz is described. The module is comprised of 22 identical PHEMT chips, 4-way microstrip power combiners and dividers, and a 4-way waveguide power combiner

Persistent current in a one-dimensional ring of fractionally charged "exclusons''

The Aharonov-Bohm effect in a one-dimensional (1D) ring containing a gas of fractionally charged excitations is considered. It is shown that the low temperature behavior of the system is identical to that of free electrons with (integer) charge $e$. This is a direct consequence of the fact that the total charge in the ring is quantized in units of the electron charge. Anomalous oscillations of the persistent current amplitude with temperature are predicted to occur as a direct manifistation of the fractional nature of the quasiparticle charge. A 1D conducting ring with gate induced periodical potential is discussed as a possible set-up for an experimental observation of the predicted phenomenon.Comment: 4 pages, RevTex, uuencoded figure

Planning for population viability on Northern Great Plains national grasslands

Broad-scale information in concert with conservation of individual species must be used to develop conservation priorities and a more integrated ecosystem protection strategy. In 1999 the United States Forest Service initiated an approach for the 1.2 x 106 ha of national grasslands in the Northern Great Plains to fulfill the requirement to maintain viable populations of all native and desirable introduced vertebrate and plant species. The challenge was threefold: 1) develop basic building blocks in the conservation planning approach, 2) apply the approach to national grasslands, and 3) overcome differences that may exist in agency-specific legal and policy requirements. Key assessment components in the approach included a bioregional assessment, coarse-filter analysis, and fine-filter analysis aimed at species considered at-risk. A science team of agency, conservation organization, and university personnel was established to develop the guidelines and standards and other formal procedures for implementation of conservation strategies. Conservation strategies included coarse-filter recommendations to restore the tallgrass, mixed, and shortgrass prairies to conditions that approximate historical ecological processes and landscape patterns, and fine-filter recommendations to address viability needs of individual and multiple species of native animals and plants. Results include a cost-effective approach to conservation planning and recommendations for addressing population viability and biodiversity concerns on national grasslands in the Northern Grea