16 research outputs found
Use of mesoporous silica
The currently available technologies enable limitation of organic contaminants migration from paper-based packaging to foodstuff through application of plastic, aluminum or activated carbon layers on/inside paper/paperboard foils. In any case, these technologies require ad hoc paper production chains, whilist contaminants are not removed from packaging. The patented technology allows for adsorbing and removing toxic contaminants (MOSH) and potential carcinogenics (MOAH) from paper/paperboard without the need to modify production line and without altering the cellulose neutral color. The patent application claims the use of mesoporous silicas at high affinity for mineral oil. The silicas are thermally regenerable and reusable in numerous production cycle
Comparative Life Cycle Assessment of Cellulose Nanofibres Production Routes from Virgin and Recycled Raw Materials
Nanocellulose-based materials are attracting an increasing interest for the positive role they could play in sustainable development; being originated from renewable resources. Moreover, cellulose has a high potential of recycling from both post-consumer waste and industrial waste. Both factors, i.e., recyclability and renewable resources; results are also extremely favourable in the perspective of circular economy. Despite all these positive aspects, an industrial production has yet to start. At the lab scale, many preparation methods of cellulose nanofibres (CNF) are available; here, the three most common are analysed: (1) enzymatic pre-treatment followed by homogenisation (ENZHO), (2) oxidative pre-treatment combined with homogenisation (TOHO) or (3) oxidative pre-treatment followed by sonication (TOSO). All three processes have been experimentally carried out starting from both virgin and recycled cellulose from industrial waste sludge. The environmental sustainability of these three routes is estimated by the Life Cycle Assessment (LCA) using experimental lab scale data. In this scenario, the comparative LCA has pointed out a superior performance of the ENZHO process, followed by TOHO and, lastly, by TOSO. The influence of energy consumption on the final results has been further investigated by a sensitivity analysis, showing that the TOHO and TOSO routes could reach similar performances by scaling-up the process from the laboratory. The different typology of CNF obtained by conducting the ENZHO process with respect to the TEMPO-mediated oxidation approach is also outlined as an additional element to be considered for the final selection of a suitable process
USO DI SILICE MESOPOROSA
La tecnologia applicata alla produzione di carta/cartone ad uso alimentare, attraverso il trattamento con silici modificate, rimuove gli oli minerali (la cui frazione aromatica è un potenziale cancerogeno) senza alterare il colore della carta
Stabilization of\ua0mineral oil hydrocarbons in\ua0recycled paper pulp by\ua0organo-functionalized mesoporous silicas and\ua0evaluation of\ua0migration to\ua0food
The occurrence of mineral oil hydrocarbons (MOH) in cellulose-based packaging is mainly due to the offset printing process where MOH are used as a ink pigments' solvent. The MOH migration from paper/paperboard to food is matter of concern for EFSA, members state authorities, consumers, and food industry. In this study, the feasibility to stabilize MOH by adding a sorbent into recycled paper obtained through a common washing process was investigated and the migration to wheat flour/Tenax\uc2\uae assessed. Among several white/pale yellow porous materials, organo-modified powder silica MCM-41-Si(CH3)3 showed the best combination between affinity for MOH (184% dw) and stability to thermal regeneration. A freshly issued newspaper with >3000\ua0mg\ua0MOH\ua0kg-1 was used to produce recycled paper at a laboratory-scale plant. MCM-41-Si(CH3)3 was added at the pulping step (1% dw) and the sorbent-enriched pulp handled according to a washing paper production process with no effect on the paper optical brightness. The MOH content of the wheat flour in contact with the sorbent-enriched paper under accelerated migration conditions (15\uc2\ua0days at 40 \uc2\ub0C) resulted 20% of that contacted with control paper (4.3 \ub1 1.1 and 20.4 \ub1 5.5\ua0mg\ua0kg-1, respectively), despite its contamination was 24% higher than the control. On the contrary, Tenax\uae contamination resulted 56.0 \ub1 10.0 and 47 \ub1 14.0\ua0mg\ua0kg-1 when exposed to sorbent-enriched and control paper, respectively
Can TEMPO-Oxidized Cellulose Nanofibers Be Used as Additives in Bio-Based Building Materials? A Preliminary Study on Earth Plasters
Interest towards cellulose nanofibers obtained from virgin and waste sources has seen a significant growth, mainly thanks to the increasing sensitivity towards the concept of circular economy and the high levels of paper recycling achieved in recent years. Inspired by the guidelines of the green building industry, this study proposes the production and characterization of TEMPO-oxidized and homogenized cellulose nanofibers (TOHO CNF) from different sources and their use as additives for earth plasters on two different raw earth samples, characterized by geotechnical laboratory tests and mineralogical analysis: a high-plasticity clay (T2) and a medium-compressibility silt (ABS). Original sources, including those derived from waste (recycled cardboard and paper mill sludge), were characterized by determining chemical content (cellulose versus ashes and lignin) and fiber morphology. TOHO CNF derived from the different sources were compared in terms of nanofibers medium diameter, crystallinity degree, thermal decomposition and oxidation degree, that is the content of carboxylic groups per gram of sample. Then, a preliminary analysis of the influence of CNF on earth plasters is examined. Adhesion and capillary absorption tests highlighted the effect of such nanofibers on blends in function of two factors, namely the cellulose original source and the oxidation degree of the fibers. In particular, for both earth samples, T2 and ABS, a significant increase in adhesion strength was observed in the presence of some TOHO CNF additives. As far as capillary sorption tests, while an undesired increase in water adsorption was detected for T2 compared to the control, in the case of ABS, a significant reduction in water content was measured by adding TOHO CNF derived from recycled sources. These results pave the way for further in-depth investigation on the role of TOHO CNF as additives for earth plasters
Risk factors for candidemia in hospitalized patients with liver cirrhosis: a multicenter case-control-control study
The aim of this study was to evaluate the risk factors for candidemia in patients with liver cirrhosis
Incidence and Prognosis of Ventilator-Associated Pneumonia in Critically Ill Patients with COVID-19: A Multicenter Study
The primary objective of this multicenter, observational, retrospective study was to assess the incidence rate of ventilator-associated pneumonia (VAP) in coronavirus disease 2019 (COVID-19) patients in intensive care units (ICU). The secondary objective was to assess predictors of 30-day case-fatality of VAP. From 15 February to 15 May 2020, 586 COVID-19 patients were admitted to the participating ICU. Of them, 171 developed VAP (29%) and were included in the study. The incidence rate of VAP was of 18 events per 1000 ventilator days (95% confidence intervals [CI] 16\u201321). Deep respiratory cultures were available and positive in 77/171 patients (45%). The most frequent organisms were Pseudomonas aeruginosa (27/77, 35%) and Staphylococcus aureus (18/77, 23%). The 30-day case-fatality of VAP was 46% (78/171). In multivariable analysis, septic shock at VAP onset (odds ratio [OR] 3.30, 95% CI 1.43\u20137.61, p = 0.005) and acute respiratory distress syndrome at VAP onset (OR 13.21, 95% CI 3.05\u201357.26, p < 0.001) were associated with fatality. In conclusion, VAP is frequent in critically ill COVID-19 patients. The related high fatality is likely the sum of the unfavorable prognostic impacts of the underlying viral and the superimposed bacterial diseases