10,888 research outputs found
Comparisons of the execution times and memory requirements for high-speed discrete fourier transforms and fast fourier transforms, for the measurement of AC power harmonics
Conventional wisdom dictates that a Fast Fourier Transform (FFT) will be a more computationally effective method for measuring multiple harmonics than a Discrete Fourier Transform (DFT) approach. However, in this paper it is shown that carefully coded discrete transforms which distribute their computational load over many frames can be made to produce results in shorter execution times than the FFT approach, even for large number of harmonic measurement frequencies. This is because the execution time of the presented DFT actually rises with N and not the classical N2 value, while the execution time of the FFT rises with Nlog2N
Modelling Gaia CCD pixels with Silvaco 3D engineering software
Gaia will only achieve its unprecedented measurement accuracy requirements
with detailed calibration and correction for radiation damage. We present our
Silvaco 3D engineering software model of the Gaia CCD pixel and two of its
applications for Gaia: (1) physically interpreting supplementary buried channel
(SBC) capacity measurements (pocket-pumping and first pixel response) in terms
of e2v manufacturing doping alignment tolerances; and (2) deriving electron
densities within a charge packet as a function of the number of constituent
electrons and 3D position within the charge packet as input to microscopic
models being developed to simulate radiation damage.Comment: 4 pages, 3 figures, contributed poster, appearing in proceedings of
the ELSA conference: Gaia, at the frontiers of astrometry, 7-11 June 2010,
S\`evres, Pari
Integration of a mean-torque diesel engine model into a hardware-in-the-loop shipboard network simulation using lambda tuning
This study describes the creation of a hardware-in-the-loop (HIL) environment for use in evaluating network architecture, control concepts and equipment for use within marine electrical systems. The environment allows a scaled hardware network to be connected to a simulation of a multi-megawatt marine diesel prime mover, coupled via a synchronous generator. This allows All-Electric marine scenarios to be investigated without large-scale hardware trials. The method of closing the loop between simulation and hardware is described, with particular reference to the control of the laboratory synchronous machine, which represents the simulated generator(s). The fidelity of the HIL simulation is progressively improved in this study. First, a faster and more powerful field drive is implemented to improve voltage tracking. Second, the phase tracking is improved by using two nested proportional–integral–derivative–acceleration controllers for torque control, tuned using lambda tuning. The HIL environment is tested using a scenario involving a large constant-power load step. This provides a very severe test of the HIL environment, and also reveals the potentially adverse effects of constant-power loads within marine power systems
Modelling electron distributions within ESA's Gaia satellite CCD pixels to mitigate radiation damage
The Gaia satellite is a high-precision astrometry, photometry and
spectroscopic ESA cornerstone mission, currently scheduled for launch in 2012.
Its primary science drivers are the composition, formation and evolution of the
Galaxy. Gaia will achieve its unprecedented positional accuracy requirements
with detailed calibration and correction for radiation damage. At L2, protons
cause displacement damage in the silicon of CCDs. The resulting traps capture
and emit electrons from passing charge packets in the CCD pixel, distorting the
image PSF and biasing its centroid. Microscopic models of Gaia's CCDs are being
developed to simulate this effect. The key to calculating the probability of an
electron being captured by a trap is the 3D electron density within each CCD
pixel. However, this has not been physically modelled for the Gaia CCD pixels.
In Seabroke, Holland & Cropper (2008), the first paper of this series, we
motivated the need for such specialised 3D device modelling and outlined how
its future results will fit into Gaia's overall radiation calibration strategy.
In this paper, the second of the series, we present our first results using
Silvaco's physics-based, engineering software: the ATLAS device simulation
framework. Inputting a doping profile, pixel geometry and materials into ATLAS
and comparing the results to other simulations reveals that ATLAS has a free
parameter, fixed oxide charge, that needs to be calibrated. ATLAS is
successfully benchmarked against other simulations and measurements of a test
device, identifying how to use it to model Gaia pixels and highlighting the
effect of different doping approximations.Comment: 12 pages, 6 figures, appearing in Proc. of SPIE Optics and Photonics
Conference (Focal Plane Arrays for Space telescopes IV), 2-6 August 2009, San
Diego, US
Solid metabolic waste transport and stowage investigation
The basic Waste Collection System (WCS) design under consideration utilized air flow to separate the stool from the WCS user and to transport the fecal material to a slinger device for subsequent deposition on a storage bowel. The major parameters governing stool separation and transport were found to be the area of the air inlet orifices, the configuration of the air inlet orifice and the transport air flow. Separation force and transport velocity of the stool were studied. The developed inlet orifice configuration was found to be an effective design for providing fecal separation and transport. Simulated urine tests and female user tests in zero gravity established air flow rates between 0.08 and 0.25 cu sm/min (3 and 9 scfm) as satisfactory for entrapment, containment and transport of urine using an urinal. The investigation of air drying of fecal material as a substitute for vacuum drying in a WCS breadboard system showed that using baseline conditions anticipated for the shuttle cabin ambient atmosphere, flow rates of 0.14 cu sm/min (5 cfm) were adequate for drying and maintaining biological stability of the fecal material
Functional consequences of heterogeneous gap junction channel formation and its influence in health and disease
AbstractThe capacity of multiple connexins to hetero-oligomerize into functional heterogeneous gap junction channels has been demonstrated in vivo11Used herein to denote in an animal., in vitro22Used herein to denote in cultured cells., and in nonmammalian expression systems. These heterogeneous channels display gating activity, channel conductances, selectivity and regulatory behaviors that are sometimes not predicted by the behaviors of the corresponding homogeneous channels. Such observations suggest that heteromerization of gap junction proteins offers an efficient cellular strategy for finely regulating cell-to-cell communication. The available evidence strongly indicates that heterogeneous gap junction assembly is important to normal growth and differentiation, and may influence the appearance of several disease states. Definitive evidence that heterogeneous gap junction channels differentially regulate electrical conduction in excitable cells is absent. This review examines the prevalence, regulation, and implications of gap junction channel hetero-oligomerization
Wakefield damping for the CLIC crab cavity
A crab cavity is required in the CLIC to allow effective head-on collision of
bunches at the IP. A high operating frequency is preferred as the deflection
voltage required for a given rotation angle and the RF phase tolerance for a
crab cavity are inversely proportional to the operating frequency. The short
bunch spacing of the CLIC scheme and the high sensitivity of the crab cavity to
dipole kicks demand very high damping of the inter-bunch wakes, the major
contributor to the luminosity loss of colliding bunches. This paper
investigates the nature of the wakefields in the CLIC crab cavity and the
possibility of using various damping schemes to suppress them effectively
Vulnerability mitigation of transmission line outages using demand response approach with distribution factors
The overloading of lines due to transmission line outages is often the first step that when not appropriately addressed leads to a system-wide blackout. While enhancing generation capacity or reinforcing the grid are recognized mitigation measures, the advances made in demand response are increasingly offering measures of altering demand to keep line flows within thermal limits. As the proportion of dispatchable generation decreases through increased renewable duplicating conventional stations, the use of flexible demand in this will increasingly grow. This paper presents an assessment of the ability of a demand response approach on a large scale to mitigate the vulnerability of transmission line outages. It is demonstrated by means of integrating the power flow analysis tool, MATPOWER with demand side management simulator based on PowerMatcher Technology. Two terms, line outage distribution factor (LODF) and power transfer distribution factor (PTDF), are used to determine the most effective localized demand side action. The methodology is implemented on a simulation of a previous power outage scenario in Southern Thailand, and the results of outage mitigation have shown the measure of contribution to post-fault recovery made
Interface states in junctions of two semiconductors with intersecting dispersion curves
A novel type of shallow interface state in junctions of two semiconductors
without band inversion is identified within the envelope function
approximation, using the two-band model. It occurs in abrupt junctions when the
interband velocity matrix elements of the two semiconductors differ and the
bulk dispersion curves intersect. The in-plane dispersion of the interface
state is found to be confined to a finite range of momenta centered around the
point of intersection. These states turn out to exist also in graded junctions,
with essentially the same properties as in the abrupt case.Comment: 1 figur
- …