20,950 research outputs found
Propulsion sizing program
Computer program was written to evaluate and define optimum design parameters of low pressure auxiliary propulsion system. APS will provide attitude and translational control of space shuttle vehicles. Program evaluates subsystem design parameters such as engine chamber pressure, mixture ratio, expansion ratio, and subsystem component weight and size
Airflow calibration and exhaust pressure/temperature survey of an F404, S/N 215-109, turbofan engine
A General Electric F-404 turbofan engine was calibrated for thrust and airflow at the NASA Lewis Propulsion System Laboratory in support of future flight tests of the X-29 aircraft. Tests were conducted with and without augmentation, over a range of flight conditions, including the two design points of the airplane. Data obtained during the altitude tests will be used to correct two independent gross thrust calculation routines which will be installed and operated on the airplane to determine in-flight gross thrust. Corrected airflow data as a function of corrected fan speed collapsed onto a single curve. Similarly, trends were observed and defined for both augmented and dry thrust. Overall agreement between measured data and F-404 Engine Spec Deck data was within 2 percent for airflow and 6 percent for thrust. The results of an uncertainty analysis for thrust and airflow is presented. In addition to the thrust calibration, the exhaust gas boundary layer pressure and temperatures were surveyed at selected condition and engine power levels to obtain data for another NASA F-404 program. Test data for these surveys are presented
New class of thermosetting plastics has improved strength, thermal and chemical stability
New class of thermosetting plastics has high hydrocarbon content, high stiffness, thermal stability, humidity resistance, and workability in the precured state. It is designated cyclized polydiene urethane, and is applicable as matrices to prepare chemically stable ablative materials for rocket nose cones of nozzles
Topological entropy and blocking cost for geodesics in riemannian manifolds
For a pair of points in a compact, riemannian manifold let
(resp. ) be the number of geodesic segments with length
joining these points (resp. the minimal number of point obstacles
needed to block them). We study relationships between the growth rates of
and as . We derive lower bounds on
in terms of the topological entropy and its fundamental group. This
strengthens the results of Burns-Gutkin \cite{BG06} and Lafont-Schmidt
\cite{LS}. For instance, by \cite{BG06,LS}, implies that is
unbounded; we show that grows exponentially, with the rate at least
.Comment: 13 page
Polyimide polymers provide improved ablative materials
Principle heat absorption of silica-reinforced plastic ablative materials occurs from the in-depth reaction of silica with carbon to form silicon monoxide and carbon monoxide. The higher the degree of completion of this reaction, the higher the capacity of the ablative material to absorb heat
Polyimide polymers provide higher char yield for graphitic structures
Technique for manufacture of graphite composites uses high-char-forming processable polyimide resin systems to produce the graphitic matrix. Only three cyclic steps are required to yield a 99.7 percent graphite product
Ablative resin Patent
Ablative resins used for retarding regression in ablative materia
Automated weld torch guidance control system
A device for automatically controlling the movement of a welding torch while welding an elongated joint is described. A charge injection television camera is carried on a movable support. The camera includes a matrix of individual light sensing video elements which generate voltages responsive to light reflected off of the joint and surrounding areas of the work piece. The voltages produced by the pixels are converted to digital words which are fed to a microprocessor for generating an error signal. This error signal is fed to a digital motor which is used to drive a movable support upon which the television camera is carried
Investigation of resin systems for improved ablative materials Final report, 19 Jun. 1964 - 31 Jul. 1965
Resin systems investigated for improving ablative materials for use with fluorine-containing liquid propellant system
Giving Students Respect: One of the Great Soft Skills of Teaching and Learning
The importance of soft skills is described for achieving teaching and learning outcomes by educational instructors. The introductory discussion briefly explores the variety of attributes that different scholars classify as soft skills. The emphasis here is on the intangible human qualities that create outstanding learning opportunities, rather than viewings soft skills as simply teaching process in contrast to hard skills of knowledge and performance. Two examples of teaching scholars are considered in elaborating how they achieve high quality learning outcomes: Four principles from Wlodowski and Ginsberg in delivering intensive block courses are outlined. Five principles from Bain’s research into ‘What the Best Teachers Do’ are also described. In each case these teaching exemplars show the importance of soft skills in the craft of teaching. In the last part of the discussion the soft skill of respect is put forward as a fundamentally important, but often undertheorised and underutilised, pedagogical self-discipline and resource for excellent teaching
- …