Management of forearm nonunions: current concepts

Forearm nonunions are uncommon but severely disabling and challenging to treat. Multiple factors have been associated with the establishment of forearm nonunions such as fracture location and complexity, patient characteristics and surgical technique. Treatment of diaphyseal forearm nonunions differs from that of other type of diaphyseal nonunions because of the intimate relationship between the radius and ulna and their reciprocal movement. There is a wide variation of surgical techniques, and the optimal choice of management remains subject to debate. In this review, we aim to summarize the available evidence in the literature on forearm nonunions and combine it with practical recommendations based on our clinical experience to help guide the management of this complex problem

Functional and radiographic outcomes of reverse shoulder arthroplasty with a minimum follow-up of 10 years

Background: The use of reverse shoulder arthroplasty (RSA) is becoming increasingly prevalent. However, few studies have been published reporting the long-term outcomes of RSA. This study aims to report the clinical, radiographic, and patient-reported outcomes of the Delta Xtend reverse shoulder prosthesis, performed by a single surgeon and with a minimum follow-up of 10 years. Methods: All RSA procedures performed between 2005 and 2012 were identified. Patients were contacted and invited for a follow-up visit including clinical assessment, radiographs, and patient-reported outcome measures. Patients with a follow-up of less than 10 years were excluded. The revision-free implant survival was calculated at 10 years. Between 2005 and 2012, 119 procedures in 116 patients meeting inclusion criteria were identified. Of these patients, 35 were deceased before reaching the 10-year follow-up and 23 could not be reached. In total, 63 RSAs could be included in 61 patients (response rate: 75%). The median follow-up was 11.7 years (interquartile range [IQR]: 10.5-13.2). Results: Of the 61 patients, 7 patients underwent a revision after a median of 3 years (IQR: 0.2-9.8) during the total follow-up period. The 10-year implant survival was 94% (95% confidence interval: 84-98). At final follow-up, the median anterior elevation was 135° (IQR: 130°-160°), the median abduction was 120° (IQR: 100°-135°), and the median level reached with internal rotation was L5 (IQR: sacrum-L5). The median Auto-Constant score was 68 (IQR: 53-78), the median Subjective Shoulder Value was 80 (IQR: 70-93), and the median pain score was 0.2/10 (IQR: 0-2). In total, radiographs could be obtained in 25 patients (40%). Scapular notching occurred in 10 patients (40%), which was classified as Sirveaux-Nerot grade IV in 3 patients (12%). Ossification occurred in 10 patients (40%), and stress shielding in 2 patients (8%). Radiolucencies were observed around the humeral component in 24 patients (96%) and around the glenoid component in 13 patients (52%). Conclusion: The long-term results of RSA with a Delta Xtend prosthesis are favorable, with long-term improvement in range of motion and patient-reported outcome measures, and a satisfactory implant survival rate. Interestingly, the radiographical analysis showed high prevalence of signs associated with loosening, which did not seem to translate to high complication rates or inferior results.</p

Reverse shoulder arthroplasty with a 155° neck-shaft angle inlay implant design without reattachment of the subscapularis tendon results in satisfactory functional internal rotation and no instability:a cohort study

Background: The aim of this study was to use the Activities of Daily Living which require Internal Rotation (ADLIR) questionnaire to assess the functional internal rotation in patients who had undergone reverse shoulder arthroplasty (RSA) without reattachment of the subscapularis (SSc) tendon at a minimum follow-up of 2 years. The secondary aim was to report the objective range of motion (ROM) and the rate of postoperative instability. Materials and methods: All consecutive primary RSA procedures without reattachment of the SSc tendon that were performed using a Delta Xtend prosthesis (an inlay system with a 155° neck-shaft angle) between January 2015 and December 2020 were identified to ensure a minimum follow-up of 2 years. Patients were contacted and requested to fill in several questionnaires, including the ADLIR and Auto-Constant scores. Results: In total, 210 patients met the inclusion criteria; among those patients, 187 could be contacted and 151 completed questionnaires (response rate: 81%). The SSc tendon was fully detached without repair in all cases, and a superolateral approach was used in 130 (86%) cases. The median follow-up was 4.5 years (range: 2.0–7.6). At final follow-up, the mean ADLIR score was 88/100 (interquartile range (IQR): 81–96). The median level reached in internal rotation was the 3rd lumbar vertebra (IQR: lumbosacral region—12th thoracic vertebra). Of the 210 eligible patients, one required a revision for a dislocation within the first month after primary surgery. With regards to regression analysis with ADLIR score as the outcome, none of the factors were associated with the ADLIR score, although age and smoking approached significance (0.0677 and 0.0594, respectively). None of the explanatory variables were associated with ROM in internal rotation (p &gt; 0.05). Conclusions: This study demonstrates that satisfactory ADLIR scores and internal rotation ROM were obtained at mid-term follow-up after RSA leaving the SSc detached. Leaving the SSc detached also did not lead to high instability rates; only one out of 210 prostheses was revised for dislocation within the first month after primary surgery. Level of evidence III.</p

Lateralising reverse shoulder arthroplasty using bony increased offset (BIO-RSA) or increasing glenoid component diameter:comparison of clinical, radiographic and patient reported outcomes in a matched cohort

Background: This study aims to compare the range of motion (ROM) of reverse shoulder arthroplasty lateralised by bony increased offset (BIO-RSA) using a standard 38-mm (mm) component to regular reverse shoulder arthroplasty (RSA) lateralised by using a 42-mm glenoid component. The secondary aims are to compare patient-reported and radiographic outcomes between the two groups. Materials and Methods: All patients with a BIO-RSA and size 38 glenosphere were retrospectively identified and matched to patients with a regular RSA and size 42 glenosphere. Matched patients were invited for a follow-up visit. ROM was assessed as well as radiographic outcomes (lateralisation, distalisation, inferior overhang, scapular notching, heterotopic bone formation, radiolucency, stress shielding, bone graft healing and viability and complications) and patient-reported outcomes (subjective shoulder value, Constant score, American Shoulder and Elbow Surgeons, activities of daily living which require internal rotation, activities of daily living which require external rotation and a visual analogue scale for pain). Outcomes were compared between the two groups. Results: In total, 38 BIO-RSAs with a size 38 glenosphere were matched to 38 regular RSAs with a size 42 glenosphere. Of the 76 matched patients, 74 could be contacted and 70 (95%) were included. At the final follow-up, there were no differences between the two groups in ROM, patient-reported outcomes or radiographic outcomes (p &gt; 0.485). Conclusions: Using a larger glenosphere is a feasible alternative to BIO-RSA for lateralising RSA, providing comparable ROM, patient-reported and radiographic results, while potentially decreasing costs, operative time and complication rates. Level of evidence III.</p

Computer-assisted versus non-computer-assisted preoperative planning of corrective osteotomy for extra-articular distal radius malunions: a randomized controlled trial

<p>Abstract</p> <p>Background</p> <p>Malunion is the most common complication of distal radius fracture. It has previously been demonstrated that there is a correlation between the quality of anatomical correction and overall wrist function. However, surgical correction can be difficult because of the often complex anatomy associated with this condition. Computer assisted surgical planning, combined with patient-specific surgical guides, has the potential to improve pre-operative understanding of patient anatomy as well as intra-operative accuracy. For patients with malunion of the distal radius fracture, this technology could significantly improve clinical outcomes that largely depend on the quality of restoration of normal anatomy. Therefore, the objective of this study is to compare patient outcomes after corrective osteotomy for distal radius malunion with and without preoperative computer-assisted planning and peri-operative patient-specific surgical guides.</p> <p>Methods/Design</p> <p>This study is a multi-center randomized controlled trial of conventional planning versus computer-assisted planning for surgical correction of distal radius malunion. Adult patients with extra-articular malunion of the distal radius will be invited to enroll in our study. After providing informed consent, subjects will be randomized to two groups: one group will receive corrective surgery with conventional preoperative planning, while the other will receive corrective surgery with computer-assisted pre-operative planning and peri-operative patient specific surgical guides. In the computer-assisted planning group, a CT scan of the affected forearm as well as the normal, contralateral forearm will be obtained. The images will be used to construct a 3D anatomical model of the defect and patient-specific surgical guides will be manufactured. Outcome will be measured by DASH and PRWE scores, grip strength, radiographic measurements, and patient satisfaction at 3, 6, and 12 months postoperatively.</p> <p>Discussion</p> <p>Computer-assisted surgical planning, combined with patient-specific surgical guides, is a powerful new technology that has the potential to improve the accuracy and consistency of orthopaedic surgery. To date, the role of this technology in upper extremity surgery has not been adequately investigated, and it is unclear whether its use provides any significant clinical benefit over traditional preoperative imaging protocols. Our study will represent the first randomized controlled trial investigating the use of computer assisted surgery in corrective osteotomy for distal radius malunions.</p> <p>Trial registration</p> <p>NCT01193010</p

Biomechanical evaluation of fixation of comminuted olecranon fractures: one-third tubular versus locking compression plating

New concepts in plate fixation have led to an evolution in plate design for olecranon fractures. The purpose of this study was to compare the stiffness and strength of locking compression plate (LCP) fixation to one-third tubular plate fixation in a cadaveric comminuted olecranon fracture model with a standardised osteotomy. Five matched pairs of cadaveric elbows were randomly assigned for fixation by either a contoured LCP combined with an intramedullary screw and unicortical locking screws or a one-third tubular plate combined with bicortical screws. Construct stiffness was measured by subjecting the specimens to cyclic loading while measuring gapping at the osteotomy site. Construct strength was measured by subjecting specimens to ramp load until failure. There was no significant difference in fixation stiffness and strength between the two fixation methods. All failures consisted of failure of the bone and not of the hardware. Contoured LCP and intramedullary screw fixation can be used as an alternative treatment method for comminuted olecranon fractures as its stiffness and strength were not significantly different from a conventional plating techniqu

Treatment of diaphyseal non-unions of the ulna and radius

Non-unions of the forearm often cause severe dysfunction of the forearm as they affect the interosseus membrane, elbow and wrist. Treatment of these non-unions can be challenging due to poor bone stock, broken hardware, scarring and stiffness due to long-term immobilisation. We retrospectively reviewed a large cohort of forearm non-unions treated by using a uniform surgical approach during a period of 33 years (1975-2008) in a single trauma centre. All non-unions were managed following the AO-principles of compression plate fixation and autologous bone grafting if needed. The study cohort consisted of 47 patients with 51 non-unions of the radius and/or ulna. The initial injury was a fracture of the diaphyseal radius and ulna in 22 patients, an isolated fracture of the diaphyseal ulna in 13, an isolated fracture of the diaphyseal radius in 5, a Monteggia fracture in 5, and a Galeazzi fracture-dislocation of the forearm in 2 patients. Index surgery for non-union consisted of open reduction and plate fixation in combination with a graft in 30 cases (59%), open reduction and plate fixation alone in 14 cases (27%), and only a graft in 7 cases (14%). The functional result was assessed in accordance to the system used by Anderson and colleagues. Average follow-up time was 75 months (range 12-315 months). All non-unions healed within a median of 7 months. According to the system of Anderson and colleagues, 29 patients (62%) had an excellent result, 8 (17%) had a satisfactory result, and 10 (21%) had an unsatisfactory result. Complications were seen in six patients (13%). Our results show that treatment of diaphyseal forearm non-unions using classic techniques of compression plating osteosynthesis and autologous bone grafting if needed will lead to a high union rate (100% in our series). Despite clinical and radiographic bone healing, however, a substantial subset of patients will have a less than optimal functional outcom

Saphoid fractures. Anatomy, diagnosis and treatment

This thesis deals with current issues in anatomy, diagnosis and treatment of scaphoid fractures. Anatomical inconsistencies are elucidated by accurate 3D imaging. Sophisticated diagnostic imaging cannot solve the problem of the suspected scaphoid fracture because there is no gold standard for a true fracture, and there likely never will be. Acknowledging that we can only deal in probabilities, the development of clinical prediction rules will help to better define and narrow those probabilities. Fracture displacement and instability cannot be accurately diagnosed or predicted on CT or radiographs. CT is more accurate than radiographs at diagnosing displacement, and training of observers can increase the reliability. Adequate treatment of scaphoid fractures can result in high rates of union (95-100%). The choice of surgical or conservative treatment should be based on surgeon and patient preferences. If conservative treatment is opted, there is no need to immobilize the thumb

Treatment of proximal ulna and olecranon fractures by dorsal plating

OBJECTIVE : Anatomic reconstruction of proximal ulna and olecranon fractures allowing early mobilization and prevention of ulnohumeral arthritis. INDICATIONS : Comminuted olecranon or proximal ulna fractures (including Monteggia fractures), olecranon fractures extending distally from the coronoid process, nonunions of the proximal ulna, segmental fractures of the proximal ulna extending into the shaft, fractures of the proximal ulna associated with a coronoid fracture. CONTRAINDICATIONS : Patients in poor general condition. Soft-tissue defects around the elbow preventing wound closure over the plate. Pediatric fractures with open growth plates where screws would cross the physis. SURGICAL TECHNIQUE : Posterior approach to the elbow. Hinging the fracture site open by extension of the proximal fragment based on triceps insertion. Fracture involvement of the coronoid with a large displaced fracture fragment can generally be reduced through the fracture side. Reconstruction with temporary Kirschner wires. Fixation by placing a (precontoured) plate around the tip of the olecranon with a long intramedullary screw and orthogonal (uni)cortical screws in the shaft. Radial head pathology can be addressed - if needed - through the same incision. Internal fixation, resection or prosthetic replacement of the radial head is done based on injury pattern/stability. POSTOPERATIVE MANAGEMENT : Functional rehabilitation using active assisted range of motion of the elbow may be started immediately out of splint. Posterior splint for 7-10 days to allow wound healing. RESULTS : Between 2003 and July 2008, 26 patients were treated with posterior plating of the proximal ulna and olecranon using this strategy. There were 23 acute fractures (of which one was referred for revision after suboptimal fixation a few days earlier), one nonunion that became traumatized, and two nascent malunions. A midline posterior approach allowed addressing both ulna and radial head pathology. The plate was contoured to wrap around the olecranon. All fractures healed. There were one postoperative infection, one transient ulnar neuropathy, one transient radial neuropathy, and one nonresolving ulnar/median neuropathy in a complex upper extremity injury. At follow-up after an average of 18 months, range of motion was on average 132 degrees /18 degrees of flexion/extension, and 75 degrees /70 degrees of pronation/supination. All fractures had healed at an average of 4.8 months. Ten patients had their hardware remove