Remote soil moisture measurements

The degree of polarization of visible sunlight reflected from bare soils in agricultural test areas in the southwestern United States was measured by an airborne photopolarimeter. Surface soil specimens provided data concerning the surface moisture of the soil to which the polarization data were compared. The results indicate the feasibility of measuring soil surface moisture by airborne polarimeter instrumentation

Extended first-principles thermochemistry for the oxidation of titanium tetrachloride

A detailed first-principles investigation of the gas-phase precursor chemistry of titanium tetrachloride (TiCl4) in an O2 environment is used to identify the thermodynamically most stable oxidation products. Candidate species are systematically proposed based on twelve manually defined base moieties in combination with possible functional groups attached to each moiety. The ground state geometry and vibrational frequencies for each candidate species are calculated using density functional theory at the B97-1/6-311+G(d,p) level of theory. A set of 2; 328 unique candidate species are found to be physically reasonable. Their thermochemical data are calculated by applying statistical thermodynamics. Standard enthalpies of formation are estimated, if unknown, by using a set of error-cancelling balanced reactions. An equilibrium composition analysis of a mixture of TiCl4/O2 (50 mol%) at 3 bar is performed to identify the thermodynamically stable products. At low temperatures, below approximately 700 K, trimer species are dominant. This is followed by a mid-temperature range of 700 to 1975 K where Ti2OCl6 is the most abundant species, before its thermodynamic stability decreases. Between 1200 and 1825 K TiCl4 is the most stable monomer. At temperatures above 1975 K TiOCl2 becomes the dominant species. This species has been measured experimentally. A structural analysis is used to suggest further potentially stable higher polymers and defines a starting point to investigate the mechanisms leading to the formation of titanium dioxide (TiO2) particles

Method of extending hyperfine coherence times in Pr^3+:Y_2SiO_5

In this letter we present a method for increasing the coherence time of praseodymium hyperfine ground state transitions in Pr^3+:Y_2SiO_5 by the application of a specific external magnetic field. The magnitude and angle of the external field is applied such that the Zeeman splitting of a hyperfine transition is at a critical point in three dimensions, making the first order Zeeman shift vanishingly small for the transition. This reduces the influence of the magnetic interactions between the praseodymium ions and the spins in the host lattice on the transition frequency. Using this method a phase memory time of 82ms was observed, a value two orders of magnitude greater than previously reported. It is shown that the residual dephasing is amenable quantum error correction

Numerical simulation and parametric sensitivity study of titanium dioxide particles synthesised in a stagnation flame

A detailed population balance model is used to simulate titanium dioxide nanoparticles synthesised in a stagnation flame from titanium tetraisopropoxide (TTIP) precursor. A two-step simulation methodology is employed to apply the detailed particle model as a post-process to flame profiles obtained from a fully coupled simulation with detailed gas-phase chemistry, flow dynamics and a simple particle model. The detailed particle model tracks the size and coordinates of each primary in an aggregate, and is able to resolve the particle morphology, permitting direct comparison with experimental measurements through simulated TEM-style images. New sintering parameters, informed by molecular dynamics simulations in the literature, are introduced into the model to account for the sintering behaviour of sub-10 nm particles. Simulated primary and aggregate particle size distributions were in excellent agreement with experimental measurements. A parametric sensitivity study found particle morphology to be sensitive to the sintering parameters, demonstrating the need to apply careful consideration to the sintering behaviour of nano-sized particles in modelling studies. The final particle morphology was not found to be sensitive to other model parameters

A unified evaluation of iterative projection algorithms for phase retrieval

Iterative projection algorithms are successfully being used as a substitute of lenses to recombine, numerically rather than optically, light scattered by illuminated objects. Images obtained computationally allow aberration-free diffraction-limited imaging and the possibility of using radiation for which no lenses exist. The challenge of this imaging technique is transfered from the lenses to the algorithms. We evaluate these new computational ``instruments'' developed for the phase retrieval problem, and discuss acceleration strategies.Comment: 12 pages, 9 figures, revte

Elastic constants of beta-eucryptite: A density functional theory study

The five independent elastic constants of hexagonal $\beta$-eucryptite have been determined using density functional theory (DFT) total energy calculations. The calculated values agree well, to within 15%, with the experimental data. Using the calculated elastic constants, the linear compressibility of $\beta$-eucryptite parallel to the c-axis, $\chi_c$, and perpendicular to it, $\chi_a$, have been evaluated. These values are in close agreement to those obtained from experimentally known elastic constants, but are in contradiction to the direct measurements based on a three-terminal technique. The calculated compressibility parallel to the c-axis was found to positive as opposed to the negative value obtained by direct measurements. We have demonstrated that $\chi_c$ must be positive and discussed the implications of a positive $\chi_c$ in the context of explaining the negative bulk thermal expansion of $\beta$-eucryptite.Comment: 3 eps figures, submitted for publicatio

Accuracy of B(E2; 0+ -> 2+) transition rates from intermediate-energy Coulomb excitation experiments

The method of intermediate-energy Coulomb excitation has been widely used to determine absolute B(E2; 0+ -> 2+) quadrupole excitation strengths in exotic nuclei with even numbers of protons and neutrons. Transition rates measured with intermediate-energy Coulomb excitation are compared to their respective adopted values and for the example of 26Mg to the B(E2; 0+ -> 2+) values obtained with a variety of standard methods. Intermediate-energy Coulomb excitation is found to have an accuracy comparable to those of long-established experimental techniques.Comment: to be published in Phys. Rev.