33 research outputs found
Electric-field noise above a thin dielectric layer on metal electrodes
The electric-field noise above a layered structure composed of a planar metal electrode covered by a thin dielectric is evaluated and it is found that the dielectric film considerably increases the noise level, in proportion to its thickness. Importantly, even a thin (mono) layer of a low-loss dielectric can enhance the noise level by several orders of magnitude compared to the noise above a bare metal. Close to this layered surface, the power spectral density of the electric field varies with the inverse fourth power of the distance to the surface, rather than with the inverse square, as it would above a bare metal surface. Furthermore, compared to a clean metal, where the noise spectrum does not vary with frequency (in the radio-wave and microwave bands), the dielectric layer can generate electric-field noise which scales in inverse proportion to the frequency. For various realistic scenarios, the noise levels predicted from this model are comparable to those observed in trapped-ion experiments. Thus, these findings are of particular importance for the understanding and mitigation of unwanted heating and decoherence in miniaturized ion traps.published_or_final_versio
EIT ground-state cooling of long ion strings
Electromagnetically-induced-transparency (EIT) cooling is a ground-state
cooling technique for trapped particles. EIT offers a broader cooling range in
frequency space compared to more established methods. In this work, we
experimentally investigate EIT cooling in strings of trapped atomic ions. In
strings of up to 18 ions, we demonstrate simultaneous ground state cooling of
all radial modes in under 1 ms. This is a particularly important capability in
view of emerging quantum simulation experiments with large numbers of trapped
ions. Our analysis of the EIT cooling dynamics is based on a novel technique
enabling single-shot measurements of phonon numbers, by rapid adiabatic passage
on a vibrational sideband of a narrow transition
Deterministic reordering of 40Ca+ ions in a linear segmented Paul trap
In the endeavour to scale up the number of qubits in an ion-based quantum
computer several groups have started to develop miniaturized ion traps for
extended spatial control and manipulation of the ions. Shuttling and separation
of ion strings have been the foremost issues in linear-trap arrangements and
some prototypes of junctions have been demonstrated for the extension of ion
motion to two dimensions (2D). While junctions require complex trap structures,
small extensions to the 1D motion can be accomplished in simple linear trap
arrangements. Here, control of the extended field in a planar, linear chip trap
is used to shuttle ions in 2D. With this approach, the order of ions in a
string is deterministically reversed. Optimized potentials are theoretically
derived and simulations show that the reordering can be carried out
adiabatically. The control over individual ion positions in a linear trap
presents a new tool for ion-trap quantum computing. The method is also expected
to work with mixed crystals of different ion species and as such could have
applications for sympathetic cooling of an ion string.Comment: 18 pages, 9 figures. Added section on possibility of adiabatic turn.
Added appendix on point charge model. Other minor alterations/clarifications.
Version now published (http://www.iop.org/EJ/abstract/1367-2630/11/10/103008
Ion-trap measurements of electric-field noise near surfaces
Electric-field noise near surfaces is a common problem in diverse areas of physics and a limiting factor for many precision measurements. There are multiple mechanisms by which such noise is generated, many of which are poorly understood. Laser-cooled, trapped ions provide one of the most sensitive systems to probe electric-field noise at MHz frequencies and over a distance range 30−3000 μm from a surface. Over recent years numerous experiments have reported spectral densities of electric-field noise inferred from ion heating-rate measurements and several different theoretical explanations for the observed noise characteristics have been proposed. This paper provides an extensive summary and critical review of electric-field noise measurements in ion traps and compares these experimental findings with known and conjectured mechanisms for the origin of this noise. This reveals that the presence of multiple noise sources, as well as the different scalings added by geometrical considerations, complicates the interpretation of these results. It is thus the purpose of this review to assess which conclusions can be reasonably drawn from the existing data, and which important questions are still open. In so doing it provides a framework for future investigations of surface-noise processes.published_or_final_versio
Design, Fabrication, and Experimental Demonstration of Junction Surface Ion Traps
We present the design, fabrication, and experimental implementation of
surface ion traps with Y-shaped junctions. The traps are designed to minimize
the pseudopotential variations in the junction region at the symmetric
intersection of three linear segments. We experimentally demonstrate robust
linear and junction shuttling with greater than one million round-trip shuttles
without ion loss. By minimizing the direct line of sight between trapped ions
and dielectric surfaces, negligible day-to-day and trap-to-trap variations are
observed. In addition to high-fidelity single-ion shuttling, multiple-ion
chains survive splitting, ion-position swapping, and recombining routines. The
development of two-dimensional trapping structures is an important milestone
for ion-trap quantum computing and quantum simulations.Comment: 9 pages, 6 figure
Trapped-ion probing of light-induced charging effects on dielectrics
We use a string of confined Ca ions to measure perturbations to a
trapping potential which are caused by light-induced charging of an
anti-reflection coated window and of insulating patches on the ion-trap
electrodes. The electric fields induced at the ions' position are characterised
as a function of distance to the dielectric, and as a function of the incident
optical power and wavelength. The measurement of the ion-string position is
sensitive to as few as elementary charges per on the
dielectric at distances of order millimetres, and perturbations are observed
for illumination with light of wavelengths as long as 729\,nm. This has
important implications for the future of miniaturised ion-trap experiments,
notably with regards to the choice of electrode material, and the optics that
must be integrated in the vicinity of the ion. The method presented can be
readily applied to the investigation of charging effects beyond the context of
ion trap experiments.Comment: 11 pages, 5 figure
Operation of a planar-electrode ion-trap array with adjustable RF electrodes
One path to realizing systems of trapped atomic ions suitable for large-scale quantum computing and simulation is to create a two-dimensional (2D) array of ion traps. Interactions between nearest-neighbouring ions could then be turned on and off by tuning the ions’ relative positions and frequencies. We demonstrate and characterize the operation of a planar-electrode ion-trap array. By driving the trap with a network of phase-locked radio-frequency resonators which provide independently variable voltage amplitudes we vary the position and motional frequency of a Ca ion in two-dimensions within the trap array. Work on fabricating a miniaturised form of this 2D trap array is also described, which could ultimately provide a viable architecture for large-scale quantum simulations.published_or_final_versio
Spatially-resolved potential measurement with ion crystals
We present a method to measure potentials over an extended region using
one-dimensional ion crystals in a radio frequency (RF) ion trap. The
equilibrium spacings of the ions within the crystal allow the determination of
the external forces acting at each point. From this the overall potential, and
also potentials due to specific trap features, are calculated. The method can
be used to probe potentials near proximal objects in real time, and can be
generalized to higher dimensions.Comment: 7 pages (double spaced), 3 figure
Compact RF resonator for cryogenic ion traps
We report on the investigation and implementation of a lumped-component,
radio-frequency resonator used in a cryogenic vacuum environment to drive an
ion trap. The resonator was required to achieve the voltages necessary to trap
(about 100 V), while dissipating as little power as possible (< 250 mW).
Ultimately a voltage gain of 100 was measured at 5.7 K. Single calcium ions
were confined in a trap driven by this device, providing proof of successful
resonator operation at low temperature.Comment: 6 pages, 4 figure