Impulse Generation by an Open Shock Tube

We perform experimental and numerical studies of a shock tube with an open end. The purpose is to investigate the impulse due to the exhaust of gases through the open end of the tube as a model for a partially filled detonation tube as used in pulse detonation engine testing. We study the effects of the pressure ratio (varied from 3 to 9.2) and the volume ratio (expressed as fill fractions) between the driver and driven section. Two different driver gases, helium and nitrogen, and fill fractions between 5 and 100% are studied; the driven section is filled with air. For both driver gases, increasing the pressure ratio leads to larger specific impulses. The specific impulse increases for a decreasing fill fraction for the helium driver, but the impulse is almost independent of the fill fraction for the nitrogen driver. Two-dimensional (axisymmetric) numerical simulations are carried out for both driver gases. The simulation results show reasonable agreement with experimental measurements at high pressure ratios or small fill fractions, but there are substantial discrepancies for the smallest pressure ratios studied. Empirical models for the impulse in the limits of large and small fill fractions are also compared with the data. Reasonable agreement is found for the trends with fill fractions using the Gurney or Sato model at large fill fractions, but only Cooper’s bubble model is able to predict the small fill fraction limit. Computations of acoustic impedance and numerical simulations of unsteady gas dynamics indicate that the interaction of waves with the driver-driven gas interface and the propagation of waves in the driven gas play an essential role in the partial-fill effect

Technology transfer - A selected bibliography

Selected bibliography on technology transfe

Loss tolerant linear optical quantum memory by measurement-based quantum computing

We give a scheme for loss tolerantly building a linear optical quantum memory which itself is tolerant to qubit loss. We use the encoding recently introduced in Varnava et al 2006 Phys. Rev. Lett. 97 120501, and give a method for efficiently achieving this. The entire approach resides within the 'one-way' model for quantum computing (Raussendorf and Briegel 2001 Phys. Rev. Lett. 86 5188–91; Raussendorf et al 2003 Phys. Rev. A 68 022312). Our results suggest that it is possible to build a loss tolerant quantum memory, such that if the requirement is to keep the data stored over arbitrarily long times then this is possible with only polynomially increasing resources and logarithmically increasing individual photon life-times

Monitoring intelligent distribution power systems: a power quality plan

Power system monitoring capabilities and requirements are evolving rapidly. The traditional monitoring framework in Australian distribution networks involves biannual readings of maximum demand at each distribution substation. As utilities respond to developments in metering and communications technology, automated collection and retrieval of quasi-real-time system data between substations and central repositories is now feasible. This gives network managers a significantly increased understanding of distribution network dynamic activity such as daily and seasonal load profiles. This leads to the increased ability of utilities to exploit metering data for power quality analysis purposes. This paper examines the scope for, and challenges associated with, integration of power quality monitoring with advanced metering. Emphasis is directed towards technical and regulatory conditions applying to Australian distribution utilities. Particular consideration is given to the different characteristics of the various types of sites where monitoring is required

J0316+4328: a Probable "Asymmetric Double" Lens

We report a probable gravitational lens J0316+4328, one of 19 candidate asymmetric double lenses (2 images at a high flux density ratio) from CLASS. Observations with the Very Large Array (VLA), MERLIN and the Very Long Baseline Array (VLBA) imply that J0316+4328 is a lens with high confidence. It has 2 images separated by 0.40", with 6 GHz flux densities of 62 mJy and 3.2 mJy. The flux density ratio of ~19 (constant over the frequency range 6-22 GHz) is the largest for any 2 image gravitational lens. High resolution optical imaging and deeper VLBI maps should confirm the lensing interpretation and provide inputs to detailed lens models. The unique configuration will give strong constraints on the lens galaxy's mass profile.Comment: Accepted to MNRAS Letters. 5 pages, 6 figures, 3 table

Promoting cultural rigour through critical appraisal tools in First Nations peoples' research.

OBJECTIVE: To highlight the emerging ethos of cultural rigour in the use of critical appraisal tools in research involving First Nations peoples. METHODS: Critical reflection on recent systematic review experience. RESULTS: The concept of cultural rigour is notably undefined in peer-reviewed journal articles but is evident in the development of critical appraisal tools developed by First Nations peoples. CONCLUSIONS: Conventional critical appraisal tools for assessing study quality are built on a limited view of health that excludes the cultural knowledge of First Nations peoples. Cultural rigour is an emerging field of activity that epitomises First Nations peoples' diverse cultural knowledge through community participation in all aspects of research. Implications for public health: Critical appraisal tools developed by First Nations peoples are available to researchers and direct attention to the social, cultural, political and human rights basis of health research

Specifications and programs for computer software validation

Three software products developed during the study are reported and include: (1) FORTRAN Automatic Code Evaluation System, (2) the Specification Language System, and (3) the Array Index Validation System