Reversal Modes of Simulated Iron Nanopillars in an Obliquely Oriented Field

Stochastic micromagnetic simulations are employed to study switching in three-dimensional magnetic nanopillars exposed to highly misaligned fields. The switching appears to proceed through two different decay modes, characterized by very different average lifetimes and different average values of the transverse magnetization components.Comment: 3 pages, 4 figure

CO2 pipelines material and safety considerations

This paper presents an overview of some of the most important factors and areas of uncertainty affecting integrity and accurate hazard assessment of CO2 pipelines employed as part of the Carbon Capture and Sequestration (CCS) chain. These include corrosion, hydrate formation, hydrogen embrittlement and propensity to fast running ductile and brittle factures. Special consideration is given to the impact of impurities within the CO2 feed from the various capture technologies on these possible hazards. Knowledge gaps in the modelling of outflow and subsequent dispersion of CO2 following the accidental rupture of pressurised CO2 pipelines, central to their safety assessment, are also presented

A flight-test and simulation evaluation of the longitudinal final approach and landing performance of an automatic system for a light wing loading STOL aircraft equipped with wing spoilers

As part of a comprehensive flight-test investigation of short takeoff and landing (STOL) operating systems for the terminal systems for the terminal area, an automatic landing system has been developed and evaluated for a light wing-loading turboprop-powered aircraft. An advanced digital avionics system performed display, navigation, guidance, and control functions for the test aircraft. Control signals were generated in order to command powered actuators for all conventional controls and for a set of symmetrically driven wing spoilers. This report describes effects of the spoiler control on longitudinal autoland (automatic landing) performance. Flight-test results, with and without spoiler control, are presented and compared with available (basically, conventional takeoff and landing) performance criteria. These comparisons are augmented by results from a comprehensive simulation of the controlled aircraft that included representations of the microwave landing system navigation errors that were encountered in flight as well as expected variations in atmospheric turbulence and wind shear. Flight-test results show that the addition of spoiler control improves the touchdown performance of the automatic landing system. Spoilers improve longitudinal touchdown and landing pitch-attitude performance, particularly in tailwind conditions. Furthermore, simulation results indicate that performance would probably be satisfactory for a wider range of atmospheric disturbances than those encountered in flight. Flight results also indicate that the addition of spoiler control during the final approach does not result in any measurable change in glidepath track performance, and results in a very small deterioration in airspeed tracking. This difference contrasts with simulations results, which indicate some improvement in glidepath tracking and no appreciable change in airspeed tracking. The modeling problem in the simulation that contributed to this discrepancy with flight was not resolved

Degree of Cajal-Retzius cell mislocalisation correlates with the severity of structural brain defects in mouse models of dystroglycanopathy

The secondary dystroglycanopathies are characterized by the hypoglycosylation of alpha dystroglycan, and are associated with mutations in at least 18 genes that act on the glycosylation of this cell surface receptor rather than the Dag1 gene itself. At the severe end of the disease spectrum, there are substantial structural brain defects, the most striking of which is often cobblestone lissencephaly. The aim of this study was to determine the gene‐specific aspects of the dystroglycanopathy brain phenotype through a detailed investigation of the structural brain defects present at birth in three mouse models of dystroglycanopathy—the FKRPKD, which has an 80% reduction in Fkrp transcript levels; the Pomgnt1null, which carries a deletion of exons 7–16 of the Pomgnt1 gene; and the Largemyd mouse, which carries a deletion of exons 5–7 of the Large gene. We show a rostrocaudal and mediolateral gradient in the severity of brain lesions in FKRPKD, and to a lesser extent Pomgnt1null mice. Furthermore, the mislocalization of Cajal–Retzius cells is correlated with the gradient of these lesions and the severity of the brain phenotype in these models. Overall these observations implicate gene‐specific differences in the pathogenesis of brain lesions in this group of disorders

Designs on the Web: A case study of online learning for design students

The De Montfort University Electronic Campus initiative started in September 1999. Web‐based learning resources and support have been provided for over 3,000 students via a portfolio of thirty projects ranging across all levels of the university and within every faculty. This paper focuses on one aspect of this initiative: the development of online teaching and learning materials to support first‐year IT modules for students of art and design. An undergraduate module has been converted from traditional, face‐to‐face, delivery to a hybrid combination of Web‐based and studio‐based work in accordance with Laurillard's conversational framework. In the first year of use all the new material has been made available on a pilot basis to a group of 440 students in parallel with conventional lectures and seminars. All the students have had access to the online resources; some students have used them, but some have not. Data on student expectations collected prior to starting on the module are compared with student feedback gathered at the end of the module and student performance data across the two mode's of presentation are compared to establish the relative effectiveness of each approach. In addition the paper reviews the resource implications of developing, delivering and supporting online learning and discusses some of the barriers to implementation that were encountered and overcome

A Scintillating Fiber Hodoscope for a Bremstrahlung Luminosity Monitor at an Electron−-Positron Collider

The performance of a scintillating fiber (2mm diameter) position sensitive detector ($4.8 \times 4.8$ cm$^2$ active area) for the single bremstrahlung luminosity monitor at the VEPP-2M electron-positron collider in Novosibirsk, Russia is described. Custom electronics is triggered by coincident hits in the X and Y planes of 24 fibers each, and reduces 64 PMT signals to a 10 bit (X,Y) address. Hits are accumulated (10 kHz) in memory and display (few Hz) the VEPP-2M collision vertex. Fitting the strongly peaked distribution ( $\sim$ 3-4 mm at 1.6m from the collision vertex of VEPP-2M ) to the expected QED angular distribution yields a background in agreement with an independent determination of the VEPP-2M luminosity.Comment: LaTeX with REVTeX style and options: multicol,aps. 8 pages, postscript figures separate from text. Accepted in Review of Scientific Instruments (~ Aug 1996

Study of the Staebler-Wronski degradation effect in a-Si:H based p-i-n solar cell

Conversion of solar energy into electricity using environmentally safe and clean photovoltaic methods to supplement the ever increasing energy needs has been a cherished goal of many scientists and engineers around the world. Photovoltaic solar cells on the other hand, have been the power source for satellites ever since their introduction in the early sixties. For widespread terrestrial applications, however, the cost of photovoltaic systems must be reduced considerably. Much progress has been made in the recent past towards developing economically viable terrestrial systems, and the future looks highly promising. Thin film solar cells offer cost reductions mainly from their low processing cost, low material cost, and choice of low cost substrates. These are also very attractive for space applications because of their high power densities (power produced per kilogram of solar cell pay load) and high radiation resistance. Amorphous silicon based solar cells are amongst the top candidates for economically viable terrestrial and space based power generation. Despite very low federal funding during the eighties, amorphous silicon solar cell efficiencies have continually been improved - from a low 3 percent to over 13 percent now. Further improvements have been made by the use of multi-junction tandem solar cells. Efficiencies close to 15 percent have been achieved in several labs. In order to be competitive with fossil fuel generated electricity, it is believed that module efficiency of 15 percent or cell efficiency of 20 percent is required. Thus, further improvements in cell performance is imperative. One major problem that was discovered almost 15 years ago in amorphous silicon devices is the well known Staebler-Wronski Effect. Efficiency of amorphous silicon solar cells was found to degrade upon exposure to sunlight. Until now their is no consensus among the scientists on the mechanism for this degradation. Efficiency may degrade anywhere from 10 percent to almost 50 percent within the first few months of operation. In order to improve solar cell efficiencies, it is clear that the cause or causes of such degradation must be found and the processing conditions altered to minimize the loss in efficiency. This project was initiated in 1987 to investigate a possible link between metallic impurities, in particular, Ag, and this degradation. Such a link was established by one of the NASA scientists for the light induced degradation of n+/p crystalline silicon solar cells