Electromagnetic energy transport along arrays of closely spaced metal rods as an analogue to plasmonic devices

The transport of electromagnetic energy along structures consisting of arrays of closely spaced metal rods (spacing = 0.2 cm) was investigated in the microwave regime at 8.0 GHz (lambda= 3.7 cm). The dispersion relation shows that information transport occurs at a group velocity of 0.6c. The electromagnetic energy is highly confined to the arrays (90% within a distance of 0.05lambda from the array). The propagation loss in a straight array is 3 dB/8 cm. Routing of energy around 90° corners is possible with a power loss of 3–4 dB. Analogies to plasmon wires consisting of arrays of nm-size metal clusters are discussed

Electromagnetic energy transfer and switching in nanoparticle chain arrays below the diffraction limit

Electromagnetic energy transfer in plasmon wires consisting of chains of closely spaced metal nanoparticles can occur below the diffraction limit by means of coupled plasmon modes. Coherent propagation with group velocities that exceed 0.1 c is possible in straight wires and around sharp corners (bending radius much less than wavelength of visible light). Energy transmission through chain networks is possible at high efficiencies and is a strong function of the frequency and polarization direction of the plasmon mode. Although these structures exhibit transmission losses due to heating of about 3 dB/500 nm, they have optical functionality that cannot be obtained in other ways at a length scale ≪1 μm

Models for quantitative charge imaging by atomic force microscopy

Two models are presented for quantitative charge imaging with an atomic-force microscope. The first is appropriate for noncontact mode and the second for intermittent contact (tapping) mode imaging. Different forms for the contact force are used to demonstrate that quantitative charge imaging is possible without precise knowledge of the contact interaction. From the models, estimates of the best charge sensitivity of an unbiased standard atomic-force microscope cantilever are found to be on the order of a few electrons

Localized charge injection in SiO_2 films containing silicon nanocrystals

An atomic-force microscope (AFM) is used to locally inject, detect, and quantify the amount and location of charge in SiO2 films containing Si nanocrystals (size ~2–6 nm). By comparison with control samples, charge trapping is shown to be due to nanocrystals and not ion-implantation-induced defects in samples containing ion-beam-synthesized Si nanocrystals. Using an electrostatic model and AFM images of charge we have estimated the amount of charge injected in a typical experiment to be a few hundred electrons and the discharge rate to be ~35±15 e/min

Optical emission near a high-impedance mirror

Solid state light emitters rely on metallic contacts with high sheet-conductivity for effective charge injection. Unfortunately, such contacts also support surface plasmon polariton (SPP) excitations that dissipate optical energy into the metal and limit the external quantum efficiency. Here, inspired by the concept of radio-frequency (RF) high-impedance surfaces and their use in conformal antennas we illustrate how electrodes can be nanopatterned to simultaneously provide a high DC electrical conductivity and high-impedance at optical frequencies. Such electrodes do not support SPPs across the visible spectrum and greatly suppress dissipative losses while facilitating a desirable Lambertian emission profile. We verify this concept by studying the emission enhancement and photoluminescence lifetime for a dye emitter layer deposited on the electrodes

Propagation of optical excitations by dipolar interactions in metal nanoparticle chains

Dispersion relations for dipolar modes propagating along a chain of metal nanoparticles are calculated by solving the full Maxwell equations, including radiation damping. The nanoparticles are treated as point dipoles, which means the results are valid only for a/d <= 1/3, where a is the particle radius and d the spacing. The discrete modes for a finite chain are first calculated, then these are mapped onto the dispersion relations appropriate for the infinite chain. Computed results are given for a chain of 50-nm diameter Ag spheres spaced by 75 nm. We find large deviations from previous quasistatic results: Transverse modes interact strongly with the light line. Longitudinal modes develop a bandwidth more than twice as large, resulting in a group velocity that is more than doubled. All modes for which k_mode <= w/c show strongly enhanced decay due to radiation damping.Comment: 26 pages, 7 figures, 2 tables. to appear in Phys. Rev.