Nonlinear ptychographic coherent diffractive imaging

Ptychographic Coherent diffractive imaging (PCDI) is a significant advance in imaging allowing the measurement of the full electric field at a sample without use of any imaging optics. So far it has been confined solely to imaging of linear optical responses. In this paper we show that because of the coherence-preserving nature of nonlinear optical interactions, PCDI can be generalised to nonlinear optical imaging. We demonstrate second harmonic generation PCDI, directly revealing phase information about the nonlinear coefficients, and showing the general applicability of PCDI to nonlinear interactions

Enhanced optical properties of Tm³⁺ in f co-doped lead germanate glasses for fibre device applications

The effect on structure and property of adding fluoride into Tm3+ doped lead-germanate glass was established and verified experimentally. It was found that up to 10 mol% of fluoride could be introduced into our original lead-germanate composition while retaining the high thermal stability ideal for fibre fabrication. Much improved spectroscopic features, namely increased fluorescent lifetimes from 3H4 and 3F4 levels in Tm3+ with increasing fluorine content, were observed. At the same time it was found that the radiative properties of Tm3+ were left unchanged by fluoride addition, indicating that reduced multiphonon relaxation was responsible for the increased fluorescent lifetimes. This was well explained and foreseen by our established structure-property relation in terms of adding fluorine to the glass. In conclusion, fluoro-germanate glass shows advantages over germanate glass in optical properties and over fluoride glass in chemical and mechanical properties for practical fiber device applications. [Presentation slides

High intensity pulse self-compression in short hollow core capillaries

The drive for shorter pulses for use in techniques such as high harmonic generation and laser wakefield acceleration requires continual improvement in post-laser pulse compression techniques. The two most commonly used methods of pulse compression for high intensity pulses are hollow capillary compression via self-phase modulation (SPM) [1] and the more recently developed filamentation [2]. Both of these methods can require propagation distances of 1-3 m to achieve spectral broadening and compression. Additionally, hollow capillary compression requires post compression of the broadened pulse by chirped mirrors. Filamentation trades the efficiency of hollow capillary compression (67%) for ionisation-induced pulse self-compression. A mixture of SPM and plasma generation increases the spectral bandwidth of the pulse; however this occurs only in a small region at the centre of the beam. Spatial filtering is required to achieve the shortest pulses, reducing the efficiency to 20%. Although the majority of hollow core capillary compression requires long propagation distances, compression in short capillaries [3] with significant plasma generation has been demonstrated to be a promising technique

Reviews

Reviews of International and comparative industrial relations, Tatau Tatau - one big union altogether, Remedy for present evils: a history of the New Zealand Public Service Association from 1890, Sexual harassment in the workplace, Employee selection, Legislating for workplace hazards in New Zealand: overseas experience and our present and future needs, People and enterprises - human behaviour in New Zealand organisations and From school to unemployment? The labour market for young peopl

Optical properties and local structures of Tm³⁺ ions in F co-doped lead-germanate glasses

Rare-earth doped optical fibres have received considerable attention in recent years due to the enhanced performance that optically pumped fibre devices Carl give over bulk glass devices. For many years, however, fabrication of low loss rare-earth doped fibres has been confined to silica-related glasses (lately fluoride-based ZBLAN glass fibres have become available, but their weak mechanical strength and poor chemical durability are problematic in practice). This has caused considerable problem in developing future important fibre devices such as 1.3µm optical amplifiers and long or short wavelength fibre lasers. It is thus absolutely essential that the range of rare-earth doped glasses that can be made into fibre structures is extended, particularly into lower phonon-energy glasses, combining possibly the best properties of both silica (low-loss, high strength etc.) and fluoride-based glasses (low non-radiative relaxation rate, etc.

Defect production in silica fibers doped with Tm³⁺

Irradiation of Tm3+ fibers with blue light at 476 nm induces a broad-bandwidth loss in these fibers. We have measured the spectral dependence of the loss for both silica-germania and silica-alumina fibers and show through micro-Raman studies of the core regions of the fibers that this induced loss is correlated with the production of structural defects in the glass host

Thulium-doped lead germanate fibre lasers

To date research on optical fibre lasers and amplifiers has mainly concentrated on two classes of host glass, silicates and fluorozirconates. In this paper we present results obtained from a new glass, based on lead germanate. This glass has been chosen to answer a need for a host having a maximum phonon energy intermediate between that of silica and fluorozirconate glass. The specific glass composition was also developed to be suitable for fibre fabrication. We report results of lasing on two transitions in thulium-doped lead germanate fibre. Recently this new glass has also been shown to be compatible with ion implantation techniques to produce planar waveguide lasers

Soft systems methodology: a context within a 50-year retrospective of OR/MS

Soft systems methodology (SSM) has been used in the practice of operations research and management science OR/MS) since the early 1970s. In the 1990s, it emerged as a viable academic discipline. Unfortunately, its proponents consider SSM and traditional systems thinking to be mutually exclusive. Despite the differences claimed by SSM proponents between the two, they have been complementary. An extensive sampling of the OR/MS literature over its entire lifetime demonstrates the richness with which the non-SSM literature has been addressing the very same issues as does SSM

Fabrication and optical properties of lead-germanate glasses and a new class of optical fibres doped with Tm³⁺

In this article we present a study of a new class of optical fibers based on lead germanate glass. The maximum vibrational frequency of this glass is intermediate between silica and zirconium barium lanthanum aluminum fluoride glass, causing a beneficial change in nonradiative decay and therefore quantum efficiency for particular laser transitions. Fabrication of high-strength, low-loss fibers of this glass has been achieved by modification of the composition to produce optimal physical properties for fiber drawing, while retaining the useful vibrational properties of the original PbGeO2 glass. Measurements of both the thermal and optical properties are described. The fibers produced are ideal for many applications in fiber devices

High-energy laser-pulse self-compression in short gas-filled fibers

We examine the spatiotemporal compression of energetic femtosecond laser pulses within short gas-filled fibers. The study is undertaken using an advanced nonlinear pulse propagation model based on a multimode generalized nonlinear Schrödinger equation that has been modified to include plasma effects. Plasma defocusing and linear propagation effects are shown to be the dominant processes within a highly dynamical mechanism that enables 100-fs pulses to be compressed into the few-cycle regime after <50 mm of propagation. Once the mechanism has been introduced, parameter spaces are explored and compressor designs suitable for performing high-field experiments in situ are presented. We finish by showing how these designs may be extended to novel wavelengths and driving pulses delivered by state-of-the-art high-repetition-rate lasers