Smoothness-based forces for deformable models: A long-range force and a corner fitting force

Deformable models, originally proposed by Terzopoulos et al. (Artif. Intell. 36 (1988) 91) and Kass et al. (Int. J. Comput. Vision 1 (1988) 321) in 1988, have been widely used in medical image segmentation. However, they manifest two well-known limitations: the lack of an appropriate long-range force to drive the model surface towards the object boundary and poor performance at high curvature boundaries (such as corners) due to the models' intrinsic smoothness constraint. In this paper, a new smoothness force with local control is proposed. The local control is used to devise a long-range force, referred to as the self-zoom force, and a corner fitting force. The self-zoom force enables the model surface to expand and shrink without a limit in range. The corner fitting force propels the model surface to fit high-curvature boundaries. Experiments demonstrate that the model surface is driven to the object boundary by the new forces even if the initial estimate is not close and the object is nonconvex or has a high local curvature. © 2002 Elsevier Science Ltd. All rights reserved

That flipping classroom - Getting engineering students to be consciously competent on their own

© 2015 IEEE. This paper is inspired by the Keynote Speech which I gave at ITHET 2014 in York in September 2014. The material was very well received, and it seemed appropriate to offer it for publication in the proceedings of ITHET 2015

Using Matlab modeling in cody to teach Teletraffic engineering

© 2017 IEEE. Engineering students are having to model increasingly complex constructed environments at the same time that their traditional mathematical skills are decreasing[?]. New approaches to modeling are needed. We started with the premise that students find mathematical modeling of Teletraffic problems challenging, and that this can be replaced through modeling in a 'computational' environment such as Matlab. In this paper, we show how the Teletraffic Engineering part of a Network Management subject can be made more interesting and accessible. We plot the student satisfaction scores to show the effectiveness of the approach

Learning data engineering: Creating IoT apps using the node-RED and the RPI technologies

© 2017 IEEE. This paper demonstrates the suitability and the practicality of using the advanced open source tools such as the Raspberry Pi and the Node-RED for teaching and learning in the Internet of Things (IOT) subject within a newly created major of Data Engineering in the Faculty of Engineering and IT at University of Technology, Sydney. Understanding and practicing of the Internet of Things largely depend on the high availability of tools, their low cost, and ease of use that can accelerate learning processes. This paper demonstrates relatively uncomplicated practical lab exercises involving the Raspberry Pi hardware, firmware and the Node-RED programming environment that students can execute to stimulate their learning, understanding of the Internet of Things technology and acquire fundamental data engineering skills

The B-L/Electroweak Hierarchy in Heterotic String and M-Theory

E8 x E8 heterotic string and M-theory, when compactified on a Calabi-Yau threefold admitting an SU(4) vector bundle with Wilson lines, can give rise to the exact MSSM spectrum with three right-handed neutrino chiral superields, one per family. Rank preserving Wilson lines require that the standard model group be augmented by a gauged U(1)_B-L. Since there are no fields in this theory for which 3(B-L) is an even, non-zero integer, the gauged B-L symmetry must be spontaneously broken at a low scale, not too far above the electroweak scale. It is shown that in these heterotic standard models, the B-L symmetry can be broken, with a phenomenologically viable B-L/electroweak hierarchy, by at least one right-handed sneutrino acquiring a vacuum expectation value. This is explicitly demonstrated, in a specific region of parameter space, using a renormalization group analysis and soft supersymmetry breaking operators. The vacuum state is shown to be a stable, local minimum of the potential and the resultant hierarchy is explicitly presented in terms of tan[beta].Comment: 16 pages; typos fixed, analysis generalize

Antiferromagnetic ordering in the Kondo lattice system Yb2_2Fe3_3Si5_5

Compounds belonging to the R$_2$Fe$_3$Si$_5$ series exhibit unusual superconducting and magnetic properties. Although a number of studies have been made on the first reentrant antiferromagnet superconductor Tm$_2$Fe$_3$Si$_5$, the physical properties of Yb$_2$Fe$_3$Si$_5$ are largely unexplored. In this work, we attempt to provide a comprehensive study of bulk properties such as, resistivity, susceptibility and heat-capacity of a well characterized polycrystalline Yb$_2$Fe$_3$Si$_5$. Our measurements indicate that Yb$^{3+}$ moments order antiferromagnetically below 1.7 K. Moreover, the system behaves as a Kondo lattice with large Sommerfeld coefficient ($\gamma$) of 0.5~J/Yb mol K$^{2}$ at 0.3 K, which is well below T$_N$. The absence of superconductivity in Yb$_2$Fe$_3$Si$_5$ down to 0.3 K at ambient pressure is attributed to the presence of the Kondo effect.Comment: 10 pages, 3 figures, tex document. A fuller version has appeared in PRB. Here we have omitted the figures showing the crystal structure and the fitting of the X-ray pattern. Also the table with the lattice parameters obtained from fitting has been remove

Unusual Ground State Properties of the Kondo-Lattice Compound Yb2Ir3Ge5

We report sample preparation, structure, electrical resistivity, magnetic susceptibility and heat capacity studies of a new compound Yb$_2$Ir$_3$Ge$_5$. We find that this compound crystallizes in an orthorhombic structure with a space group PMMN unlike the compound Ce$_2$Ir$_3$Ge$_5$ which crystallizes in the tetragonal IBAM (U$_2$Co$_3$Si$_5$ type) structure. Our resistivity measurements indicate that the compound Yb$_2$Ir$_3$Ge$_5$ behaves like a typical Kondo lattice system with no ordering down to 0.4 K. However, a Curie-Weiss fit of the inverse magnetic susceptibility above 100 K gives an effective moment of only 3.66 $\mu$$_B$ which is considerably less than the theoretical value of 4.54 $\mu$$_B$ for magnetic Yb$^3+$ ions. The value of $\theta_{P}$ = -15.19 K is also considerably higher indicating the presence of strong hybridization. An upturn in the low temperature heat capacity gives an indication that the system may order magnetically just below the lowest temperature of our heat capacity measurements (0.4 K). The structure contains two sites for Yb ions and the present investigation suggests that Yb may be trivalent in one site while it may be significantly lower (close to divalent) in the other.Comment: 9 pages, 4 figures. submitted to Phys. Rev.

Is anybody 'Learning' from deaths? Sequential content and reflexive thematic analysis of national statutory reporting within the NHS in England 2017-2020

INTRODUCTION: The imperative to learn when a patient dies due to problems in care is absolute. In 2017, the Learning from Deaths (LfDs) framework, a countrywide patient safety programme, was launched in the National Health Service (NHS) in England. NHS Secondary Care Trusts (NSCTs) are legally required to publish quantitative and qualitative information relating to deaths due to problems in care within their organisation, including any learning derived from these deaths. METHOD: All LfDs report from 2017 to 2020 were reviewed and evaluated, quantitatively and qualitatively using sequential content and reflexive thematic analysis, through a critical realist lens to understand what we can learn from LfDs reporting and the mechanisms enabling or preventing engagement with the LfDs programme. RESULTS: The majority of NSCTs have identified learning, actions and, to a lesser degree, assessed the impact of these actions. The most frequent learning relates to missed/delayed/uncoordinated care and communication/cultural issues. System issues and lack of resources feature infrequently. There is significant variation among NSCTs as to what 'learning' in this context actually means and a lack of oversight combining patient safety initiatives. DISCUSSION: Engagement of NSCTs with the LfDs programme varies significantly. Learning as a result of the LfDs programme is occurring. The ability, significance or value of this learning in preventing future patient deaths remains unclear. Consensus about what constitutes effective learning with regard to patient safety needs to be defined and agreed on

National statutory reporting: not even ticking the boxes? The quality of 'Learning from Deaths' reporting in quality accounts within the NHS in England 2017-2020

INTRODUCTION: Regulation through statutory reporting is used in healthcare internationally to improve accountability, quality of care and patient safety. Since 2017, within the National Health Service (NHS) in England, NHS Secondary Care Trusts (NSCTs) are legally required to report annually both quantitative and qualitative information related to patient deaths within their care within their publicly available Quality Accounts as part of a countrywide patient safety programme: The Learning from Deaths (LfDs) programme. METHOD: All LfDs reports published between 2017 (programme inception) and 2020 were reviewed and evaluated through a critical realist lens, quantitatively reported using descriptive statistics and qualitatively using reflexive thematic analysis. RESULTS: In 2017/2018, 44% of NSCTs reported all six statutory elements of the LfDs reporting regulations, in 2019/2020 35% of NSCTs were reporting this information. A small number of NSCTs did not report any parts of the LfDs regulatory requirements between 2017 and 2020. Multiple qualitative themes arose from this study suggesting problematic engagement with the LfDs programme, erroneous reporting accuracy and errors in written communication. CONCLUSIONS: The LfDs programme has, to some extent, reduced variation and improved consistency to the way that NSCTs identify, report and investigate deaths. However, 3 years into the LfDs programme, the majority of NSCTs are not reporting as required by law. This makes the validity of National statutory reporting in Quality Accounts within the NHS in England questionable as a regulatory process

Design of unit testing using xUnit.net

© 2014 IEEE. This paper presents an in-depth study of designing, implementing and executing unit test cases using the xUnit.net testing tool in general and in the context of the TeleMedicine Cluster System project within the ICT Design subject delivered at UTS, Australia. The case studies are based on the utilisation of the tool in Visual Basic 2012 using the.NET framework for C#. The paper elucidates on how and why the xUnit framework can be applied in the context of the TMC system, and how it can be tailored to meet the testing ad integration needs of the delivery of TMC system