457 research outputs found
Bioturbation depths, rates and processes in Massachusetts Bay sediments inferred from modeling of 210Pb and 239 + 240Pu profiles
Author Posting. © The Author(s), 2004. This is the author's version of the work. It is posted here by permission of Elsevier B.V. for personal use, not for redistribution. The definitive version was published in Estuarine, Coastal and Shelf Science 61 (2004): 643-655, doi:10.1016/j.ecss.2004.07.005.Profiles of 210Pb and 239+240Pu from sediment cores collected throughout Massachusetts
Bay (water depths of 36-192 m) are interpreted with the aid of a numerical sedimentmixing
model to infer bioturbation depths, rates and processes. The nuclide data suggest
extensive bioturbation to depths of 25-35 cm. Roughly half the cores have 210Pb and
239+240Pu profiles that decrease monotonically from the surface and are consistent with
biodiffusive mixing. Bioturbation rates are reasonably well constrained by these profiles
and vary from ~0.7 to ~40 cm2 yr-1. As a result of this extensive reworking, however,
sediment ages cannot be accurately determined from these radionuclides and only upper
limits on sedimentation rates (of ~0.3 cm yr-1) can be inferred. The other half of the
radionuclide profiles are characterized by subsurface maxima in each nuclide, which
cannot be reproduced by biodiffusive mixing models. A numerical model is used to
demonstrate that mixing caused by organisms that feed at the sediment surface and
defecate below the surface can cause the subsurface maxima, as suggested by previous
work. The deep penetration depths of excess 210Pb and 239+240Pu suggest either that the
organisms release material over a range of >15 cm depth or that biodiffusive mixing
mediated by other organisms is occurring at depth. Additional constraints from surficial
sediment 234Th data suggest that in this half of the cores, the vast majority of the presentday
flux of recent, nuclide-bearing material to these core sites is transported over a
timescale of a month or more to a depth of a few cm below the sediment surface. As a
consequence of the complex mixing processes, surface sediments include material
spanning a range of ages and will not accurately record recent changes in contaminant
deposition.This work
was conducted under a joint funding agreement between the USGS and the
Massachusetts Water Resources Authority
The use (and misuse) of sediment traps in coral reef environments : theory, observations, and suggested protocols
© The Authors, 2010. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Coral Reefs 30 (2011): 23-38, doi:10.1007/s00338-010-0705-3.Sediment traps are commonly used as standard tools for monitoring âsedimentationâ in coral reef environments. In much of the literature where sediment traps were used to measure the effects of âsedimentationâ on corals, it is clear from deployment descriptions and interpretations of the resulting data that information derived from sediment traps has frequently been misinterpreted or misapplied. Despite their widespread use in this setting, sediment traps do not provide quantitative information about âsedimentationâ on coral surfaces. Traps can provide useful information about the relative magnitude of sediment dynamics if trap deployment standards are used. This conclusion is based first on a brief review of the state of knowledge of sediment trap dynamics, which has primarily focused on traps deployed high above the seabed in relatively deep water, followed by our understanding of near-bed sediment dynamics in shallow-water environments that characterize coral reefs. This overview is followed by the first synthesis of near-bed sediment trap data collected with concurrent hydrodynamic information in coral reef environments. This collective information is utilized to develop nine protocols for using sediment traps in coral reef environments, which focus on trap parameters that researchers can control such as trap height (H), trap mouth diameter (D), the height of the trap mouth above the substrate (z o ), and the spacing between traps. The hydrodynamic behavior of sediment traps and the limitations of data derived from these traps should be forefront when interpreting sediment trap data to infer sediment transport processes in coral reef environments
Wave- and tidally-driven flow and sediment flux across a fringing coral reef : southern Molokai, Hawaii
This paper is not subject to U.S. copyright. The definitive version was published in Continental Shelf Research 24 (2004): 1397-1419, doi:10.1016/j.csr.2004.02.010.The fringing coral reef off the south coast of Molokai, Hawaii is currently being studied as part of a US Geological Survey (USGS) multi-disciplinary project that focuses on geologic and oceanographic processes that affect coral reef systems. For this investigation, four instrument packages were deployed across the fringing coral reef during the summer of 2001 to understand the processes governing fine-grained terrestrial sediment suspension on the shallow reef flat (h=1 m) and its advection across the reef crest and onto the deeper fore reef. The timeâseries measurements suggest the following conceptual model of water and fine-grained sediment transport across the reef: Relatively cool, clear water flows up onto the reef flat during flooding tides. At high tide, more deep-water wave energy is able to propagate onto the reef flat and larger Trade wind-driven waves can develop on the reef flat, thereby increasing sediment suspension. Trade wind-driven surface currents and wave breaking at the reef crest cause setup of water on the reef flat, further increasing the water depth and enhancing the development of depth-limited waves and sediment suspension. As the tide ebbs, the water and associated suspended sediment on the reef flat drains off the reef flat and is advected offshore and to the west by Trade wind- and tidally- driven currents. Observations on the fore reef show relatively high turbidity throughout the water column during the ebb tide. It therefore appears that high suspended sediment concentrations on the deeper fore reef, where active coral growth is at a maximum, are dynamically linked to processes on the muddy, shallow reef flat
Distinct Properties Underlie Flavin-Based Electron Bifurcation in a Novel Electron Transfer Flavoprotein FixAB from \u3cem\u3eRhodopseudomonas palustris\u3c/em\u3e
A newly recognized third fundamental mechanism of energy conservation in biology, electron bifurcation, uses free energy from exergonic redox reactions to drive endergonic redox reactions. Flavin-based electron bifurcation furnishes low-potential electrons to demanding chemical reactions, such as reduction of dinitrogen to ammonia. We employed the heterodimeric flavoenzyme FixAB from the diazotrophic bacterium Rhodopseudomonas palustris to elucidate unique properties that underpin flavin-based electron bifurcation. FixAB is distinguished from canonical electron transfer flavoproteins (ETFs) by a second FAD that replaces the AMP of canonical ETF. We exploited near-UVâvisible CD spectroscopy to resolve signals from the different flavin sites in FixAB and to interrogate the putative bifurcating FAD. CD aided in assigning the measured reduction midpoint potentials (E° values) to individual flavins, and the E° values tested the accepted model regarding the redox properties required for bifurcation. We found that the higher-E° flavin displays sequential one-electron (1-eâ) reductions to anionic semiquinone and then to hydroquinone, consistent with the reactivity seen in canonical ETFs. In contrast, the lower-E° flavin displayed a single two-electron (2-eâ) reduction without detectable accumulation of semiquinone, consistent with unstable semiquinone states, as required for bifurcation. This is the first demonstration that a FixAB protein possesses the thermodynamic prerequisites for bifurcating activity, and the separation of distinct optical signatures for the two flavins lays a foundation for mechanistic studies to learn how electron flow can be directed in a protein environment. We propose that a novel optical signal observed at long wavelength may reflect electron delocalization between the two flavins
Atmospheric mercury and fine particulate matter in coastal New England : implications for mercury and trace element sources in the northeastern United States
This paper is not subject to U.S. copyright. The definitive version was published in Atmospheric Environment 79 (2013): 760â768, doi:10.1016/j.atmosenv.2013.07.031.Intensive sampling of ambient atmospheric fine particulate matter was conducted at Woods Hole, Massachusetts over a four-month period from 3 April to 29 July, 2008, in conjunction with year-long deployment of the USGS Mobile Mercury Lab. Results were obtained for trace elements in fine particulate matter concurrently with determination of ambient atmospheric mercury speciation and concentrations of ancillary gasses (SO2, NOx, and O3). For particulate matter, trace element enrichment factors greater than 10 relative to crustal background values were found for As, Bi, Cd, Cu, Hg, Pb, Sb, V, and Zn, indicating contribution of these elements by anthropogenic sources. For other elements, enrichments are consistent with natural marine (Na, Ca, Mg, Sr) or crustal (Ba, Ce, Co, Cs, Fe, Ga, La, Rb, Sc, Th, Ti, U, Y) sources, respectively. Positive matrix factorization was used together with concentration weighted air-mass back trajectories to better define element sources and their locations. Our analysis, based on events exhibiting the 10% highest PM2.5 contributions for each source category, identifies coal-fired power stations concentrated in the U.S. Ohio Valley, metal smelting in eastern Canada, and marine and crustal sources showing surprisingly similar back trajectories, at times each sampling Atlantic coastal airsheds. This pattern is consistent with contribution of Saharan dust by a summer maximum at the latitude of Florida and northward transport up the Atlantic Coast by clockwise circulation of the summer Bermuda High. Results for mercury speciation show diurnal production of RGM by photochemical oxidation of Hg° in a marine environment, and periodic traverse of the study area by correlated RGM-SO2(NOx) plumes, indicative of coal combustion sources.We acknowledge support of the USGS Toxic Substances Hydrology
Program, the USGS Energy Resources Program, the National
Science Foundation Small Grants for Exploratory Research Program,
and for initial support, the USGS Mendenhall Postdoctoral Program
Airy processes and variational problems
We review the Airy processes; their formulation and how they are conjectured
to govern the large time, large distance spatial fluctuations of one
dimensional random growth models. We also describe formulas which express the
probabilities that they lie below a given curve as Fredholm determinants of
certain boundary value operators, and the several applications of these
formulas to variational problems involving Airy processes that arise in
physical problems, as well as to their local behaviour.Comment: Minor corrections. 41 pages, 4 figures. To appear as chapter in "PASI
Proceedings: Topics in percolative and disordered systems
Trapped electron coupled to superconducting devices
We propose to couple a trapped single electron to superconducting structures
located at a variable distance from the electron. The electron is captured in a
cryogenic Penning trap using electric fields and a static magnetic field in the
Tesla range. Measurements on the electron will allow investigating the
properties of the superconductor such as vortex structure, damping and
decoherence. We propose to couple a superconducting microwave resonator to the
electron in order to realize a circuit QED-like experiment, as well as to
couple superconducting Josephson junctions or superconducting quantum
interferometers (SQUIDs) to the electron. The electron may also be coupled to a
vortex which is situated in a double well potential, realized by nearby pinning
centers in the superconductor, acting as a quantum mechanical two level system
that can be controlled by a transport current tilting the double well
potential. When the vortex is trapped in the interferometer arms of a SQUID,
this would allow its detection both by the SQUID and by the electron.Comment: 13 pages, 5 figure
Quantity, composition, and source of sediment collected in sediment traps along the fringing coral reef off Molokai, Hawaii
This paper is not subject to U.S. copyright. The definitive version was published in Marine Pollution Bulletin 52 (2006): 1034-1047, doi:10.1016/j.marpolbul.2006.01.008.Sediment traps were used to evaluate the frequency, cause, and relative intensity of sediment mobility/resuspension along the fringing coral reef off southern Molokai (February 2000âMay 2002). Two storms with high rainfall, floods, and exceptionally high waves resulted in sediment collection rates > 1000 times higher than during non-storm periods, primarily because of sediment resuspension by waves. Based on quantity and composition of trapped sediment, floods recharged the reef flat with land-derived sediment, but had a low potential for burying coral on the fore reef when accompanied by high waves.
The trapped sediments have low concentrations of anthropogenic metals. The magnetic properties of trapped sediment may provide information about the sources of land-derived sediment reaching the fore reef. The high trapping rate and low sediment cover indicate that coral surfaces on the fore reef are exposed to transient resuspended sediment, and that the traps do not measure net sediment accumulation on the reef surface
- âŠ