Sub-mm counterparts to Lyman-break galaxies

We summarize the main results from our SCUBA survey of Lyman-break galaxies (LBGs) at z~3. Analysis of our sample of LBGs reveals a mean flux of S850=0.6$\pm$0.2 mJy, while simple models of emission based on the UV properties predict a mean flux about twice as large. Known populations of LBGs are expected to contribute flux to the weak sub-mm source portion of the far-IR background, but are not likely to comprise the bright source (S850>5 mJy) end of the SCUBA-detected source count. The detection of the LBG, Westphal-MM8, at 1.9 mJy suggests that deeper observations of individual LBGs in our sample could uncover detections at similar levels, consistent with our UV-based predictions. By the same token, many sub-mm selected sources with S850<2 mJy could be LBGs. The data are also consistent with the FarIR/$\beta$ relation holding at z=3.Comment: 6 pages, 1 figure, contributed talk at UMass/INAOE Conference ``Deep Millimeter Surveys'

350 Micron Observations of Ultraluminous Infrared Galaxies at Intermediate Redshifts

We present 350micron observations of 36 ultraluminous infrared galaxies (ULIRGs) at intermediate redshifts (0.089 <= z <= 0.926) using the Submillimeter High Angular Resolution Camera II (SHARC-II) on the Caltech Submillimeter Observatory (CSO). In total, 28 sources are detected at S/N >= 3, providing the first flux measurements longward of 100micron for a statistically significant sample of ULIRGs in the redshift range of 0.1 < z < 1.0. Combining our 350micron flux measurements with the existing IRAS 60 and 100micron data, we fit a single-temperature model to the spectral energy distribution (SED), and thereby estimate dust temperatures and far-IR luminosities. Assuming an emissivity index of beta = 1.5, we find a median dust temperature and far-IR luminosity of Td = 42.8+-7.1K and log(Lfir/Lsolar) = 12.2+-0.5, respectively. The far-IR/radio correlation observed in local star-forming galaxies is found to hold for ULIRGs in the redshift range 0.1 < z < 0.5, suggesting that the dust in these sources is predominantly heated by starbursts. We compare the far-IR luminosities and dust temperatures derived for dusty galaxy samples at low and high redshifts with our sample of ULIRGs at intermediate redshift. A general Lfir-Td relation is observed, albeit with significant scatter, due to differing selection effects and variations in dust mass and grain properties. The relatively high dust temperatures observed for our sample compared to that of high-z submillimeter-selected starbursts with similar far-IR luminosities suggest that the dominant star formation in ULIRGs at moderate redshifts takes place on smaller spatial scales than at higher redshifts.Comment: (24 pages in preprint format, 1 table, 7 figures, accepted for publication in ApJ

A study of the Sunyaev-Zel'dovich increment using archival SCUBA data

In a search for evidence of the short wavelength increment in the Sunyaev-Zel'dovich (SZ) effect, we have analyzed archival galaxy cluster data from the Sub-millimetre Common User Bolometer Array (SCUBA) on the James Clerk Maxwell Telescope, resulting in the most complete pointed survey of clusters at 850 microns to date. SCUBA's 850 microns passband overlaps the peak of the SZ increment. The sample consists of 44 galaxy clusters in the range 0 < z < 1.3. Maps of each of the clusters have been made and sources have been extracted; as an ancillary product we generate the most thorough galaxy cluster point source list yet from SCUBA. Seventeen of these clusters are free of obvious AGN and have data deep enough to provide interesting measurements of the expected SZ signal. Specialized analysis techniques are employed to extract the SZ effect signal from these SCUBA data, including using SCUBA's short wavelength band as an atmospheric monitor and fitting the long wavelength channel to a model of the spatial distribution of each cluster's SZ effect. By explicitly excising the exact cluster centre from our analysis we demonstrate that emission from galaxies within the cluster does not contaminate our measurement. The SZ amplitudes from our measurements are consistently higher than the amplitudes inferred from low frequency measurements of the SZ decrement.Comment: 27 pages, 6 figures, replacement matches version published in MNRA

Further multiwavelength observations of the SSA22 Ly_alpha emitting `blob'

We present new follow-up observations of the sub-mm luminous Ly_alpha-emitting object in the SSA22 z=3.09 galaxy overdensity, referred to as `Blob 1' by Steidel et al.(2000). In particular we discuss high resolution Hubble Space Telescope optical imaging, Owens Valley Radio Observatory spectral imaging, Keck spectroscopy, VLA 20cm radio continuum imaging, and Chandra X-ray observations. We also present a more complete analysis of the existing James Clerk Maxwell Telescope sub-mm data. We detect several optical continuum components which may be associated with the core of the submillimeter emitting region. A radio source at the position of one of the HST components (22:17:25.94, +00:12:38.9) identifies it as the likely counterpart to the submillimeter source. We also tentatively detect the CO(4-3) molecular line, centered on the radio position. We use the CO(4-3) intensity to estimate a limit on the gas mass for the system. The optical morphology of sources within the Ly_alpha cloud appears to be filamentary, while the optical source identified with the radio source has a dense knot which may be an AGN or compact starburst. We obtain a Keck-LRIS spectrum of this object, despite its faintness (R=26.8). The spectrum reveals weak Ly_alpha emission, but no other obvious features, suggesting that the source is not an energetic AGN (or that it is extremely obscured). We use non-detections in deep Chandra X-ray images to constrain the nature of the `Blob'. Although conclusive evidence regarding the nature of the object remains hard to obtain at this redshift, the evidence presented here is at least consistent with a dust-obscured AGN surrounded by a starburst situated at the heart of this giant Ly_alpha cloud.Comment: 8 pages, 9figs (low res), to appear in ApJ, for higher res figures, http://www.submm.caltech.edu/~schapman/sa22_sept4.ps.g

The CHESS spectral survey of star forming regions: Peering into the protostellar shock L1157-B1 - II. Shock dynamics

Context. The outflow driven by the low-mass class 0 protostar L1157 is the prototype of the so-called chemically active outflows. The bright bowshock B1 in the southern outflow lobe is a privileged testbed of magneto-hydrodynamical (MHD) shock models, for which dynamical and chemical processes are strongly interdependent. Aims. We present the first results of the unbiased spectral survey of the L1157-B1 bowshock, obtained in the framework of the key program “Chemical HErschel Surveys of star forming regions” (CHESS). The main aim is to trace the warm and chemically enriched gas and to infer the excitation conditions in the shock region. Methods. The CO 5-4 and o-H2_O 1_(10)–1_(01) lines have been detected at high-spectral resolution in the unbiased spectral survey of the HIFI-band 1b spectral window (555–636 GHz), presented by Codella et al. in this volume. Complementary ground-based observations in the submm window help establish the origin of the emission detected in the main-beam of HIFI and the physical conditions in the shock. Results. Both lines exhibit broad wings, which extend to velocities much higher than reported up to now. We find that the molecular emission arises from two regions with distinct physical conditions : an extended, warm (100 K), dense (3 × 10^5 cm^(-3)) component at low-velocity, which dominates the water line flux in Band 1; a secondary component in a small region of B1 (a few arcsec) associated with high-velocity, hot (>400 K) gas of moderate density ((1.0–3.0) × 10^4 cm^(-3)), which appears to dominate the flux of the water line at 179μm observed with PACS. The water abundance is enhanced by two orders of magnitude between the low- and the high-velocity component, from 8 × 10^(-7) up to 8 × 10^(-5). The properties of the high-velocity component agree well with the predictions of steady-state C-shock models

MAINTENANCE OF A MOUNTAIN VALLEY COLD POOL AND THERMAL BELT: A NUMERICAL STUDY

A mountain valley cold pool was simulated with the Pennsylvania State University-National Center for Atmospheric Research Mesoscale Model version 5 (MM5) to determine the effects of snow cover, planetary boundary layer (PBL) parameterizations, spin-up time, vertical and horizontal resolution, and horizontal diffusion on the maintenance of a cold pool. The simulation was of a cold pool that remained in the Yampa Valley of northwestern Colorado throughout 10 January 2004. Results of model runs were verified by a mesonetwork of weather stations located on the western slope of the valley. The presence of snow cover improved the simulation results, but was not sufficient to retain the cold pool in the valley. Increasing the model spin-up time, vertical resolution, and the PBL parameterization had little effect on the model results. However, increasing the horizontal resolution from 1 km to 100 m did improve the results and retained a weak inversion in the valley. Using the horizontal diffusion scheme of Zängl (2002) had an effect similar to that achieved by increasing the horizontal resolution

MAINTENANCE OF A MOUNTAIN VALLEY COLD POOL AND THERMAL BELT: A NUMERICAL STUDY

A mountain valley cold pool was simulated with the Pennsylvania State University-National Center for Atmospheric Research Mesoscale Model version 5 (MM5) to determine the effects of snow cover, planetary boundary layer (PBL) parameterizations, spin-up time, vertical and horizontal resolution, and horizontal diffusion on the maintenance of a cold pool. The simulation was of a cold pool that remained in the Yampa Valley of northwestern Colorado throughout 10 January 2004. Results of model runs were verified by a mesonetwork of weather stations located on the western slope of the valley. The presence of snow cover improved the simulation results, but was not sufficient to retain the cold pool in the valley. Increasing the model spin-up time, vertical resolution, and the PBL parameterization had little effect on the model results. However, increasing the horizontal resolution from 1 km to 100 m did improve the results and retained a weak inversion in the valley. Using the horizontal diffusion scheme of Zängl (2002) had an effect similar to that achieved by increasing the horizontal resolution

Data processing pipeline for Herschel HIFI

Context. The HIFI instrument on the Herschel Space Observatory performed over 9100 astronomical observations, almost 900 of which were calibration observations in the course of the nearly four-year Herschel mission. The data from each observation had to be converted from raw telemetry into calibrated products and were included in the Herschel Science Archive. Aims. The HIFI pipeline was designed to provide robust conversion from raw telemetry into calibrated data throughout all phases of the HIFI missions. Pre-launch laboratory testing was supported as were routine mission operations. Methods. A modular software design allowed components to be easily added, removed, amended and/or extended as the understanding of the HIFI data developed during and after mission operations. Results. The HIFI pipeline processed data from all HIFI observing modes within the Herschel automated processing environment as well as within an interactive environment. The same software can be used by the general astronomical community to reprocess any standard HIFI observation. The pipeline also recorded the consistency of processing results and provided automated quality reports. Many pipeline modules were in use since the HIFI pre-launch instrument level testing. Conclusions. Processing in steps facilitated data analysis to discover and address instrument artefacts and uncertainties. The availability of the same pipeline components from pre-launch throughout the mission made for well-understood, tested, and stable processing. A smooth transition from one phase to the next significantly enhanced processing reliability and robustness