27 research outputs found
First Results from the AMoRE-Pilot neutrinoless double beta decay experiment
The Advanced Molybdenum-based Rare process Experiment (AMoRE) aims to search
for neutrinoless double beta decay (0) of Mo with
100 kg of Mo-enriched molybdenum embedded in cryogenic detectors
with a dual heat and light readout. At the current, pilot stage of the AMoRE
project we employ six calcium molybdate crystals with a total mass of 1.9 kg,
produced from Ca-depleted calcium and Mo-enriched molybdenum
(CaMoO). The simultaneous detection of
heat(phonon) and scintillation (photon) signals is realized with high
resolution metallic magnetic calorimeter sensors that operate at milli-Kelvin
temperatures. This stage of the project is carried out in the Yangyang
underground laboratory at a depth of 700 m. We report first results from the
AMoRE-Pilot search with a 111 kgd live exposure of
CaMoO crystals. No evidence for
decay of Mo is found, and a upper limit is set for the
half-life of 0 of Mo of y at 90% C.L.. This limit corresponds to an effective
Majorana neutrino mass limit in the range eV
Radioassay of the materials for AMoRE-II experiment
The AMoRE-II experiment will search for the 0νββ decay of 100Mo nuclei using molybdate crystal scintillators, operating at milli-Kelvin (mK) temperatures, with a total of 80 kg of 100Mo. The background goal for the experiment is 10–4 counts/keV/kg/year in the region of interest around the 0νββ decay Q-value of 3,034 keV. To achieve this level, the rate of background signals arising from emissions produced by decays of radioactive impurities in the detector and shielding materials must be strictly controlled. To do this, concentrations of such impurities are measured and are controlled through materials selection and purification. In this paper, we describe the design and the construction materials used to build the AMoRE-II detector and shielding system, including active and passive shielding, the cryostat, and the detector holders and instrumentation, and we report on measurements of radioactive impurities within candidate and selected materials
CuO, MnO2 and Fe2O3 doped biomass ash as silica source for glass production in Thailand
In this research, glass productions from rice husk ash (RHA) and the effect of BaO, CuO, MnO2 and Fe2O3 on physical and optical properties were investigated. All properties were compared with glass made from SiO2 using same preparations. The results show that a higher density and refractive index of BaO, CuO, MnO2 and Fe2O3 doped in RHA glasses were obtained, compared with SiO2 glasses. The optical spectra show no significant difference between both glasses. The color of CuO glasses show blue from the absorption band near 800 nm (2B1g → 2B2g) due to Cu2+ ion in octahedral coordination with a strong tetragonal distortion. The color of MnO2 glasses shows brown from broad band absorption at around 500 nm. This absorption band is assigned to a single allowed 5Eg → 5T2g transition which arises from the Mn3+ ions (3d4 configuration) in octahedral symmetry. The yellow color derives from F2O3 glass due to the homogeneous distribution of Fe3+ (460 nm) and Fe2+ (1050 nm) ions in the glass matrices. Glass production from RHA is possible and is a new option for recycling waste from biomass power plant systems and air pollution reduction. Keywords: Rice husk ash, Glass, Optical, Physica