4 research outputs found
Improved technology of frequency-selective UHF electromagnetic shields containing helical elements
An improved technology of frequency-selective electromagnetic shields has been considered. The technology has been improved by embedding classic Archimedean helical elements made from foiled materials into the bulk of the shields for the improvement of the frequency-selective performance of the shields and pinning of these elements in the bulk of the shields by means of fusion bonding. These design features provide for the main advantage of the improved technology in comparison with counterparts, i.e., lower time consumption. The technology has been improved in the following two aspects: 1) identification of helical element parameters providing for the greatest energy loss of the UHF electromagnetic radiation interacting with the helical elements; 2) identification of the optimum helical element arrangement in the shield bulk providing for the smallest transmission and reflection coefficient of the UHF electromagnetic radiation by the shields. Technology improvement in accordance with the former of the above aspects has been achieved based on analysis of publications dealing with mathematical simulation and study of the parameters of UHF electromagnetic radiation transmission by planar helical antennas. Technology improvement in accordance with the latter aspect has been achieved based on experimental data. Test shields have been fabricated with specifically arranged embedded helical elements, and comparison has been made between the UHF electromagnetic radiation transmission and reflection coefficients of the shields. Shields fabricated in accordance with the improved technology suggested herein show good promise for the electromagnetic noise protection of electronic devices
Charcoal-containing building materials for electromagnetic radiation shielding
he aim of the study presented in the current article was to experimentally substantiate the possibility of obtaining the cost effective building materials for electromagnetic radiation shielding by using powdered charcoal as a filler. Such charcoal properties as low cost and high carbon content (up to 90.0 wt.%) were the prerequisites for the study. To achieve the goal, a method for obtaining composite materials based on powdered charcoal and building gypsum was developed and experimentally substantiated by the authors. Further, the samples of charcoal-containing building materials were made according to the developed method and the electromagnetic radiation reflection and transmission coefficients values of the samples were measured in the frequency range of 0.7–17.0 GHz using scalar network analyzer. According to the measurements results, it was found that the average value of the electromagnetic radiation reflection coefficient in the specified frequency range of the materials produced in accordance with the presented method (when these materials thickness was equal to 1.0 cm) was –3.0 dB, and the average value of the electromagnetic radiation transmission coefficient was –25.0 dB. The studied materials are recommended for use in electromagnetic shielding of the rooms housing the electronic devices
Improved technology of frequency-selective UHF electromagnetic shields containing helical elements
An improved technology of frequency-selective electromagnetic shields has been considered. The technology has been improved by embedding classic Archimedean helical elements made from foiled materials into the bulk of the shields for the improvement of the frequency-selective performance of the shields and pinning of these elements in the bulk of the shields by means of fusion bonding. These design features provide for the main advantage of the improved technology in comparison with counterparts, i.e., lower time consumption. The technology has been improved in the following two aspects: 1) identification of helical element parameters providing for the greatest energy loss of the UHF electromagnetic radiation interacting with the helical elements; 2) identification of the optimum helical element arrangement in the shield bulk providing for the smallest transmission and reflection coefficient of the UHF electromagnetic radiation by the shields. Technology improvement in accordance with the former of the above aspects has been achieved based on analysis of publications dealing with mathematical simulation and study of the parameters of UHF electromagnetic radiation transmission by planar helical antennas. Technology improvement in accordance with the latter aspect has been achieved based on experimental data. Test shields have been fabricated with specifically arranged embedded helical elements, and comparison has been made between the UHF electromagnetic radiation transmission and reflection coefficients of the shields. Shields fabricated in accordance with the improved technology suggested herein show good promise for the electromagnetic noise protection of electronic devices