Predictive factors of scapular notching in patients with reverse shoulder arthroplasty

AbstractIntroductionThe main complication of reverse shoulder arthroplasty is the development of notches in the scapular pillar, which occurs in 44% to 100% of cases. Furthermore the functional score has been shown to be poorer in patients with high-grade notches. Many options have been proposed to reduce this risk. The purpose of this study was to evaluate the predictive factors of the development of scapular notches.Materials and methodsWe retrospectively evaluated 133 shoulders in 121 patients with reverse shoulder arthroplasty. We performed a radiographic assessment of the effect of positioning the glenoid component with inferior overhang of the glenosphere and the glenometaphyseal angle. All patients were reviewed after 2years follow-up, including a clinical assessment based on the Constant score and X-rays to assess the presence of notches.ResultsNineteen complications were reported, and 14 required revision surgery. We excluded patients in whom prosthetic components were changed. The quality of the X-rays was not satisfactory enough to be analyzed in over 15 patients so they were excluded. One hundred five patients were reviewed. At 2years follow-up, 50.4% of shoulders presented with notches. The Constant score was 69.3 points (54–83) in shoulders without notches, and 66.4 points (38–82) in shoulders with notches. The average glenosphere overhang was 3.5mm (−1 – 8mm). Notches were present in 65.5% if it was less than 3mm and 39.6% if it was more than 2mm (P<0. 05). The average glenometaphyseal angle was 27.3° (4–59°), and notches developed in 72.2% if it was more than 28° and 26.5% if it was less than 28° (P<0.05).ConclusionThe position of the metaglene influences the development of notches. The risk decreases if the glenosphere overhangs the glenoid. The degree of adduction of the arm influences the development of notches and can be correlated with the patient's BMI.Level of evidenceLevel IV retrospective study

Treatment of complex fractures of the distal radius: a prospective randomised comparison of external fixation &#039;versus&#039; locked volar plating

The traditional treatment of severely impacted fractures of the distal radius involves bridging external fixation and maintaining reduction by applying continuous traction. The recent technique using fixed-angle screws within volar plates is reported restore the radial length and the articular profile whilst avoiding joint distraction. It is also believed to produce better and quicker clinical results. To test these claims, we carried out a randomised controlled comparison of the efficiency of external fixation (EF) \u27versus\u27 open reduction and internal fixation (ORIF) in treating severely impacted fractures of the distal radius. A total of 39 patients were treated with EF, eventually associated with percutaneous pinning, whereas 36 underwent ORIF with a locked volar plate. There was no significant difference in the two groups with regard to changes in the ulnar variance. Articular reduction was poor in two patients in the EF group with residual step-offs exceeding 2mm; another patient of the EF group suffered a secondary loss of reduction, healing with a severe articular malunion (&gt;2mm). By contrast, articular reduction was satisfactory in all the patients of the ORIF group. The clinical results on the Green and O\u27Brien rating were significantly better in the ORIF group than in the EF group (p&lt;0.01 at 6 weeks, p&lt;0.05 at 6 months). Nevertheless, open reduction and volar plating did not yield better subjective results than EF. However, although not statistically significant, patients treated by ORIF seemed to resume their usual activities quicker than those treated with EF, suggesting that this technique may be adapted to a greater extent in the case of active, young individuals

Aluminum and bone: Review of new clinical circumstances associated with Al(3+) deposition in the calcified matrix of bone

Several decades ago, aluminum encephalopathy associated with osteomalacia has been recognized as the major complication of chronic renal failure in dialyzed patients. Removal of aluminum from the dialysate has led to a disappearance of the disease. However, aluminum deposit occurs in the hydroxyapatite of the bone matrix in some clinical circumstances that are presented in this review. We have encountered aluminum in bone in patients with an increased intestinal permeability (coeliac disease), or in the case of prolonged administration of aluminum anti-acid drugs. A colocalisation of aluminum with iron was also noted in cases of hemochromatosis and sickle cell anemia. Aluminium was also identified in a series of patients with exostosis, a frequent benign bone tumor. Corrosion of prosthetic implants composed of grade V titanium (TA6V is an alloy containing 6% aluminum and 4% vanadium) was also observed in a series of hip or knee revisions. Aluminum can be identified in undecalcified bone matrix stained by solochrome azurine, a highly specific stain allowing the detection of 0.03 atomic %. Colocalization of aluminum and iron does not seem to be the fruit of chance but the cellular and molecular mechanisms are still poorly understood. Histochemistry is superior to spectroscopic analyses (EDS and WDS in scanning electron microscopy)

Trabecular microarchitecture in established osteoporosis: relationship between vertebrae, distal radius and calcaneus by X-ray imaging texture analysis

INTRODUCTION: Osteoporosis is an alteration of bone mass and microarchitecture leading to an increased risk of fractures. A radiograph is a 2D projection of the 3D bone network exposing a texture, that can be assessed by texture analysis. We compared the trabecular microarchitecture of the spine, radius and calcaneus in a series of osteoporotic cadavers. MATERIALS AND METHODS: Thirty-four cadavers (11 men, 23 women), mean age 85.2±2.1years, were radiographed from T4 to L5 to identify those with vertebral fractures (FV). Non-fractured vertebrae (NFV), radius and calcaneus were taken and analyzed by densitometry, radiography and texture analysis under run-length, skeletonization of the trabeculae, and fractal geometry. RESULTS: Six subjects (five women, one man) were selected, mean age 82.5±5.5years. Twelve calcanei and 10 radii were taken. Two radii were excluded. The texture of NFV was significantly correlated (P&lt;0.01) with that of the radius for horizontal run-lengths. No relationship between the texture of NFV and calcaneus was found. DISCUSSION: In the horizontal direction (perpendicular to the stress lines), the microarchitecture of NFV and radius showed a disappearance of the transverse rods anchoring the plates. Due to its particular microarchitecture, the calcaneus is not representative of the vertebral status. CONCLUSION: Bone densitometry provides no information about microarchitecture. Texture analysis of X-ray images of the radius would be a minimally invasive tool, providing an early detection of microarchitectural alterations. LEVEL OF EVIDENCE: IV retrospective study

Is radiographic measurement of distal femoral torsion reliable?

BACKGROUND: Distal femur torsion (DFT) is a crucial parameter in knee replacement surgery. The reference standard for measuring DFT is posterior condylar angle (PCA) measurement using computed tomography (CT). The objective of this study was to assess the feasibility and reliability of a radiographic PCA measurement method. MATERIALS AND METHODS: We studied 125 osteoarthritic knees in 79 patients (42 women and 37 men) with a mean age of 71.6 ± 8.8 years (range 47 to 86 years); 32 knees were aligned, 85 in varus, and eight in valgus. DFT was measured on an antero-posterior (AP) radiograph of the knee in 90° of flexion (known as the seated AP view). The PCA was defined as the angle subtended by the tangent to the posterior condyles and the transepicondylar axis (anatomic PCA [aPCA]) or the line connecting the lateral epicondyle to the medial sulcus (surgical PCA [sPCA]). The PCA was conventionally recorded as positive in the event of external torsion and negative in the event of internal torsion. PCA measurements were performed three times by each of five observers to allow assessments of inter-observer and test-retest reliabilities. RESULTS: aPCA was consistently negative (mean, -6.1 ± 1.6°) (range, 0 to -10°); inter-observer and test-retest reliability were satisfactory (0.54 CONCLUSION: Radiographic measurement of DFT is simple and non-invasive. Measurement reproducibility was satisfactory for aPCA but not for sPCA. aPCA showed marked inter-individual variability and tended to increase when the knee was in valgus. Mean aPCA values were comparable to those reported using CT. In contrast to CT, radiographic DFT measurement can easily be incorporated into the pre- and postoperative work-ups for knee replacement surgery, provided the patient can achieve 90° of knee flexion. LEVEL OF EVIDENCE: Level IV, prospective cohort study

Reverse wedge osteotomy of the distal radius in Madelung&#039;s deformity

Madelung\u27s deformity results from a growth defect in the palmar and ulnar region of the distal radius. It presents as an excessively inclined radial joint surface, inducing "spontaneous progressive palmar subluxation of the wrist". The principle of reverse wedge osteotomy (RWO) consists in the reorientation of the radial joint surface by taking a circumferential bone wedge, the base of which is harvested from the excess of the radial and dorsal cortical bone of the distal radius, then turning it over and putting back this reverse wedge into the osteotomy so as to obtain closure on the excess and opening on the deficient cortical bone. RWO corrects the palmar subluxation of the carpus and improves distal radio-ulnar alignment. All five bilaterally operated patients were satisfied, esthetically and functionally. Its corrective power gives RWO a place apart among the surgical techniques currently available in Madelung\u27s deformity

A novel pyrolytic carbon implant for hallux rigidus: a cadaveric study

BACKGROUND: The aim of this cadaveric study was to assess the technical feasibility of inserting a novel interpositional pyrolytic carbon coated implant in the first MTP joint, determine the best surgical procedure for the implantation, and evaluate the dynamic behavior of the joint after surgery. METHODS: The marble implant was inserted in the first metatarsophalangeal joint of five pairs of cadaveric feet using two different surgical approaches, dorsal and medial, for each pair. The stability and mobility of the feet before and after implantation, as well as the relationship between the implant and the sesamoids, were assessed by static and dynamic fluoroscopy. RESULTS: After implantation, the stability was perfect in all positions and the mobility was conserved. There were no conflicts between the sesamoids and the implant during the movement of the first metatarsophalangeal joint. Both the dorsal and the medial surgical approaches led to similar findings. CONCLUSION: To our knowledge, this is the first anatomic evaluation of this type of implant. Whereas the results of the technique obtained on cadaveric feet were satisfactory, caution has to be applied to trying to apply this procedure to the living patient

Total ankle arthroplasty - total ankle arthroplasty in Western France: influence of volume on complications and clinical outcome

INTRODUCTION: Total ankle arthroplasty (TAA) has become an alternative to ankle arthrodesis in the treatment of advanced osteoarthritis. "The difficulty of performing a total ankle replacement and the corresponding steep learning curve" has resulted in a proposal "to limit ankle replacement to centers that have performed at least ten total ankle replacements for at least 3 years". The aim of this study was to evaluate the influence of the frequency of TAA procedures on the complications and outcome of these arthroplasties. MATERIALS AND METHODS: This retrospective series included 183 cases who underwent surgery between 1997-2010 in eight centers: three high volume centers performed at least five TAA per year (100 cases) and six low volume centers performed less than five TAA per year (78 cases). RESULTS: The clinical assessment was performed in 133 cases that were reviewed after a mean 39 months ± 29 of follow-up. The preoperative AOFAS score was 33 ± 4 and 77 ± 15 at the final follow-up. The five-year survival rate was 86%. No significant difference was found between the groups for the AOFAS score or implant survival at the final follow-up. The high volume centers experienced more complications (45% versus 13%) but fewer implant failures (8% versus 13%) overall compared to the low volume centers. DISCUSSION: The outcome of TAA depends mainly upon the pertinence of the indication and the associated procedures that may be necessary. Rather than limiting TAA to high volume reference centers, we suggest that the assessment of each case within a predetermined area should be done in a network. This would determine the degree of specialization required for each TAA case and provide all patients with safe and equal access to this therapeutic option. LEVEL OF EVIDENCE: IV - Retrospective study

Two-stage reconstruction of post-traumatic segmental tibia bone loss with nailing

Introduction Treatment of lower extremity segmental bone loss is difficult. Masquelet et al. proposed a two-stage technique: first, debridement and filling of bone loss with an acrylic spacer; second, bone reconstruction by filling with cancellous bone in the space left free (following cement removal) inside the so-called self-induced periosteal membrane. In the originally described technique, the fracture site is stabilized by an external fixator, which remains in place throughout the bone healing process, i.e., often longer than 9 months with all the known disadvantages of this type of assembly. Following the principle of two-stage reconstruction, we modified the technique by reconstructing around an intramedullary-locking nail placed in the first stage. Hypothesis This technique prevents the mechanical complications related to external fixator use and provides faster resumption of weight-bearing. Patients and methods Twelve patients were operated for segmental tibial bone loss greater than 6 cm resulting from injury (four cases) or aseptic necrosis (one case) or septic necrosis (seven cases). All the patients were operated on in an emergency setting and the first stage was performed before the 2nd week. A free muscle flap (ten patients) or a pediculated fasciocutaneous flap (two patients) was necessary during this first step to cover the site and provide good conditions for secondary bone growth. The follow-up was 39.5 months (range, 12–94 months). Results Complete weight-bearing was resumed at a mean 4 months. After the second step, all the patients except one had apparently healed (complete weight-bearing with no pain). Five septic complications occurred after the second step, in one case leading to reconstruction failure. Four other patients had infectious complications successfully treated (as of the last follow-up) either by changing the nail in two cases or by prolonged antibiotic therapy in two other cases, with no graft loss. Discussion The use of the intramedullary nail facilitates the Masquelet technique by allowing the patient to resume weight-bearing more quickly and avoiding secondary fractures. However, the risk of sepsis remains high but can be controlled without compromising the final bone union in four cases out of five. Level of evidence Level IV. Retrospective study

Isolated interfragmentary compression for nonunion of humeral shaft fractures initially treated by nailing: A preliminary report of seven cases

Introduction Plating with bone grafting is considered the gold standard treatment for nonunion of humeral shaft fractures. However, this complex procedure involves multiple risks. The aim of this study is to evaluate an alternative treatment using isolated axial interfragmentary compression for the dynamisation of humeral shaft nonunion after retrograde locked nailing. Materials and methods Between January 2000 and May 2009, 124 humeral shaft fractures were treated in our trauma department with retrograde locked nailing using the unreamed humeral nail (UHN®, Synthes, Paoli, PA, USA). Nonunion occurred in seven patients (5.6%) – five females and two males, mean age 44 years (range: 17–73 years). The nonunion was treated by applying isolated secondary interfragmentary compression. Mean follow-up was 43 months (range: 8–74 months). The Rommens score and the disabilities of the arm, shoulder and hand (DASH) score were used to evaluate the global functioning of the upper limb. Results The compression procedure was successful in all seven cases. In each case, the union occurred without any complications in 3–5 months. The mean DASH score was 25/100 (range: 8.3–60.8/100). The Rommens score was judged excellent for five of the seven patients but two were rated moderate. One of these suffered from complex regional pain syndrome type II since the fracture, and another developed a stiff shoulder 6 months after trauma. Conclusion Isolated secondary interfragmentary compression appears to be a simple and successful procedure in cases of humeral nonunion