A Review on Quantum Dot‐Based Color Conversion Layers for Mini/Micro‐LED Displays: Packaging, Light Management, and Pixelation

Mini/microlight-emitting diodes (LEDs) are one of the most promising technologies for next-generation displays to meet the requirements of demanding applications, including augmented reality/virtual reality displays, wearable devices, and microprojectors. To realize full-color displays, the strategy of combining miniaturized blue nitride-based LEDs with color conversion layers is promising due to the high efficiencies of the LEDs and the advantageous manufacturing. Quantum dots (QDs), owing to their high photoluminescence quantum yield, small particle size, and solution processability, have emerged as the color conversion material with the most potential for mini/micro-LEDs. However, the integration of QDs into display technologies poses several challenges. From the material side, the stability of QD materials is still challenging. For the case of packaging QDs in a matrix, the dispersion quality of QDs and the light extraction of the emission need to be improved. From the fabrication side, the lack of high-precision mass manufacturing strategies in QD pixelation hinders the widespread application of QDs. Toward the issues above, this review summarizes the research on QD materials for color conversion display in recent years to systematically draw an overview of the packaging strategies, the light management approaches, and the pixelation methods of QD materials toward mini/micro-LED-based display technologies

Improvement in Color-Conversion Efficiency and Stability for Quantum-Dot-Based Light-Emitting Diodes Using a Blue Anti-Transmission Film

In this report, a blue anti-transmission film (BATF) has been introduced to improve the color-conversion efficiency (CCE) and the stability of quantum dot (QD) films. The results indicate that the CCE can be increased by as much as 93% using 15 layers of BATFs under the same QD concentration. Therefore, the same CCE can be achieved using BATF-QD hybrid films with a lower QD concentration when compared with standard QD films. The hybrid and QD films with the same CCE of 60% were aged at an environmental temperature of 25°C and with a 10 mA injection current light-emitting diode source. The CCE and luminous efficacy that are gained by the hybrid film increased by 42.8% and 24.5%, respectively, when compared with that gained by the QD film after aging for the same time period of approximately 65 h. In addition, the hybrid film can effectively suppress the red-shift phenomenon of the QD light spectra, as well as an expansion of the full-width at half maximum. Consequently, these BATF-QD hybrid films with excellent optical performance and stability show great potential for illumination and display applications

Study of the Optical Properties of Multi-Particle Phosphors by the FDTD and Ray Tracing Combined Method

It is well known that the optical properties of multi-particle phosphor are crucial to the light performance of white light-emitting diodes (LEDs). Note that the optical properties including scattering or absorption properties for a single particle are easy to be calculated. However, due to the large computation considering the complicated re-scattering and re-absorption, it is difficult to calculate the scattering behaviors of the multi-particles. A common method to reduce the computation, which can cause unknown deviations, is to replace the multi-particle scattering properties by using the average scattering data of single particles. In this work, a cluster of multi-phosphor particles are directly simulated by the finite-difference time-domain (FDTD) method. The total scattering data of the cluster was processed as a bulk scattering parameter and imported to the Monte-Carlo ray-tracing (RT) method to realize a large-scale multi-particle scattering calculation. A polynomial mathematical model was built according to the multi-particle scattering data. An experiment was carried out for verifying the accuracy of the method in this work. The mean absolute percentages of the previous method are 1.68, 2.06, and 1.22 times larger than the multi-particle method compared with the experimental curves, respectively

Study on Scattering and Absorption Properties of Quantum-Dot-Converted Elements for Light-Emitting Diodes Using Finite-Difference Time-Domain Method

CdSe/ZnS quantum-dot-converted elements (QDCEs) are good candidates for substituting rare-earth phosphor-converted elements (PCEs) in white light-emitting diodes (LEDs); however, studies on their scattering and absorption properties are scarce, suppressing further increment in the optical and thermal performance of quantum-dot-converted LEDs. Therefore, we introduce the finite-difference time-domain (FDTD) method to achieve the critical optical parameters of QDCEs when used in white LEDs; their scattering cross-section (coefficient), absorption cross-section (coefficient), and scattering phase distributions are presented and compared with those of traditional YAG phosphor-converted elements (PCEs) at varying particle size and concentration. At a commonly used concentration ( < 50 mg / cm 3 ), QDCEs exhibit stronger absorption (tens of millimeters, even for green-to-red-wavelength light) and weaker scattering ( < 1 mm − 1 ) compared to PCEs; the reabsorption, total internal reflection, angular uniformity, and thermal quenching would be more significant concerns for QDCEs. Therefore, the unique scattering and absorption properties of QDCEs should be considered when used in white LEDs. Furthermore, knowledge of these important optical parameters is helpful for beginning a theoretical study on quantum-dot-converted LEDs according to the ray tracing method

Regulating the Emission Spectrum of CsPbBr3 from Green to Blue via Controlling the Temperature and Velocity of Microchannel Reactor

The ability to precisely obtain tunable spectrum of lead halide perovskite quantum dots (QDs) is very important for applications, such as in lighting and display. Herein, we report a microchannel reactor method for synthesis of CsPbBr3 QDs with tunable spectrum. By adjusting the temperature and velocity of the microchannel reactor, the emission peaks of CsPbBr3 QDs ranging from 520 nm to 430 nm were obtained, which is wider than that of QDs obtained in a traditional flask without changing halide component. The mechanism of photoluminescence (PL) spectral shift of CsPbBr3 QDs was investigated, the result shows that the supersaturation control enabled by the superior mass and heat transfer performance in the microchannel is the key to achieve the wide range of PL spectrum, with only a change in the setting of the temperature controller required. The wide spectrum of CsPbBr3 QDs can be applied to light-emitting diodes (LEDs), photoelectric sensors, lasers, etc

A Luminous Efficiency-Enhanced Laser Lighting Device with a Micro-Angle Tunable Filter to Recycle Unconverted Blue Laser Rays

In this work, a phosphor converter with small thickness and low concentration, based on a micro-angle tunable tilted filter (ATFPC), was proposed for hybrid-type laser lighting devices to solve the problem of silicone phosphor converters’ carbonizing under high-energy density. Taking advantage of the filter and the scattering characteristics of microphosphors, two luminous areas are generated on the converter. Compared with conventional phosphor converters (CPCs), the lighting effects of ATFPCs are adjustable using tilt angles. When the tilt angle of the micro filter is 20°, the luminous flux of the ATPFCs is increased by 11.5% at the same concentration; the maximum temperature (MT) of ATFPCs is reduced by 22.8% under the same luminous flux and the same correlated color temperature (CCT) 6500 K. This new type of lighting device provides an alternative way to improve the luminous flux and heat dissipation of laser lighting

Characteristics and risk factors for death in HIV-positive talaromycosis marneffei patients with sepsis

Objectives: This case-control study aimed to analyze the characteristics and risk factors for death in HIV-positive Talaromycosis marneffei (TSM) patients with sepsis. Methods: We retrospectively reviewed 173 AIDS patients diagnosed with TSM infection from January 1, 2013, to December 1, 2023, at Hangzhou Xixi Hospital. We collected and analyzed clinical characteristics, laboratory findings, bone marrow cytology results, treatment, and prognosis. Results: Out of 173 AIDS-TSM patients, 92 had sepsis while 81 did not. AIDS-TSM patients with sepsis have a higher in-hospital mortality rate (19.6 %) than non-sepsis patients (0 %). The SOFA score showed a significant association with in-hospital mortality in AIDS-TSM patients with sepsis (OR = 1.583, 95 % CI: 1.183–2.118, P = 0.002), indicating an almost linear relationship. After adjusting for the SOFA score, only hemoglobin (Hb) (OR = 0.971, 95 % CI: 0.943–1.000, P = 0.046), international normalized ratio (INR) (OR = 22.33, 95 % CI: 1.84–270.90, P = 0.015), and C-reactive protein (CRP) (OR = 1.014, 95 % CI: 1.001–1.027, P = 0.039) remained significantly associated with in-hospital mortality. The Receiver Operating Characteristic (ROC) curve of the SOFA score, INR, and CRP showed moderately good predictive performance for in-hospital mortality, while Hb had a low predictive performance. The Area Under Curve (AUC) values were 0.834, 0.820, 0.776, and 0.669, respectively. Conclusions: AIDS-TSM patients with sepsis have a higher mortality rate. Moreover, the SOFA score, along with Hb, INR, and CRP, are the risk factors for death in AIDS-TSM patients with sepsis