32 research outputs found
Sensors on Textile Fibres Based on Ag/a-C:H:O Nanocomposite Coatings
In this contribution we present a study of the vacuum deposition process of metal/plasma polymer nanocomposite thin films monitored using plasma diagnostics (optical emission spectroscopy). We investigate the electrical properties of the nanocomposite structures suitable for their application as humidity sensors. Furthermore, the film microstructure is characterized by transmission electron microscopy and electron diffraction analysis. The amount of silver in the nanocomposite is evaluated using inductively coupled plasma optical emission spectrometry and the morphology of the structured system of metal electrodes and nanocomposite films on monofilament textile fibres is visualized using scanning electron microscopy. Ageing of nanocomposite coatings and the influence of an aqueous environment on their internal structure and properties are discussed
Plasma polymers as targets for laser-driven proton-boron fusion
Laser-driven proton-boron (pB) fusion has been gaining significant interest for energetic alpha particles production because of its neutron-less nature. This approach requires the use of B- and H-rich materials as targets, and common practice is the use of BN and conventional polymers. In this work, we chose plasma-assisted vapour phase deposition to prepare films of oligoethylenes (plasma polymers) on Boron Nitride BN substrates as an advanced alternative. The r.f. power delivered to the plasma was varied between 0 and 50 W to produce coatings with different crosslink density and hydrogen content, while maintaining the constant thickness of 1 μm. The chemical composition, including the hydrogen concentration, was investigated using XPS and RBS/ERDA, whereas the surface topography was analyzed using SEM and AFM. We triggered the pB nuclear fusion reaction focusing laser pulses from two different systems (i.e., the TARANIS multi-TW laser at the Queen’s University Belfast (United Kingdom) and the PERLA B 10-GW laser system at the HiLASE center in Prague (Czech Republic)) directly onto these targets. We achieved a yield up to 108 and 104 alpha particles/sr using the TARANIS and PERLA B lasers, respectively. Radiative-hydrodynamic and particle-in-cell PIC simulations were performed to understand the laser-target interaction and retrieve the energy spectra of the protons. The nuclear collisional algorithm implemented in the WarpX PIC code was used to identify the region where pB fusion occurs. Taken together, the results suggest a complex relationship between the hydrogen content, target morphology, and structure of the plasma polymer, which play a crucial role in laser absorption, target expansion, proton acceleration and ultimately nuclear fusion reactions in the plasma
Long-term aging of Ag/a-C:H:O nanocomposite coatings in air and in aqueous environment
Nanocomposite coatings of silver particles embedded in a plasma polymer matrix possess interesting properties depending on their microstructure. The film microstructure is affected among others also by the RF power supplied during the deposition, as shown by transmission electron microscopy. The optical properties are characterized by UV–vis–NIR spectroscopy. An anomalous optical absorption peak from the Ag nanoparticles is observed and related to the microstructure of the nanocomposite films. Furthermore, a long-term aging of the coatings is studied in-depth in ambient air and in aqueous environments. It is shown that the studied films are not entirely stable. The deposition conditions and the microstructure of the films affect the processes taking place during their aging in both environments.ISSN:1468-6996ISSN:1878-551
Dielectric properties of polymerized polyethylene oxide(PEO) thin films at different plasma discharge conditions
Dielectric properties of plasma polymerized poly(ethylene oxide) thin films
Plasma polymerized poly(ethylene oxide) (pPEO) thin films were deposited by plasma assisted physical vapor deposition (PAPVD) with a constant thickness of 500 nm. The crosslinking density of pPEO films was controlled through the discharge power. Differential scanning calorimetry (DSC) and broadband dielectric spectroscopy (BDS) were applied to analyze the structural peculiarities of these coatings. Both DSC and BDS detected an increase of the crosslink density with power, which correlated with the increasing dynamic glass transition temperature (T-g). It was shown that plasma power changes the structure of plasma polymer, and dielectric spectroscopy may be a suitable technique for structural analysis. (C) 2016 Elsevier B.V. All rights reserved
Structure and Stability of C:H:O Plasma Polymer Films Co-Polymerized Using Dimethyl Carbonate
C:H:O plasma polymer films (PPFs) were deposited by means of plasma-enhanced chemical vapour deposition using the non-toxic, biodegradable organic compound dimethyl carbonate (DMC) at various plasma powers and pressures in order to control the degradation properties related to the carbonate ester group. Coating properties using pure DMC monomer vapours were compared to co-polymerized films from gaseous mixtures of DMC with either ethylene (C2H4) or carbon dioxide (CO2) affecting deposition rate and chemical composition. C:H:O film properties were found to depend primarily on the amount of oxygen in the plasma. To investigate the PPF stability during aging, changes in the composition and properties were studied during their storage both in air and in distilled water over extended periods up to 5 months. It was shown that aging of the films is mostly due to oxidation of the plasma polymer matrix yielding slow degradation and decomposition. The aging processes and their rate are dependent on the intrinsic amount of oxygen in the as-prepared C:H:O films which in turn depends on the experimental conditions and the working gas mixture. Adjustable film properties were mainly attained using a pure DMC plasma considering both gas phase and surface processes. It is thus possible to prepare C:H:O PPFs with controllable degradability both in air and in water