Accuracy of direct insertion of TADs in the anterior palate with respect to a 3D-assisted digital insertion virtual planning

Background Direct and 3D-assisted methods are an available alternative when inserting temporary anchorage devices (TADs) in the anterior palate for orthodontic anchorage. This study aimed to evaluate the differences between a planned insertion versus a direct method on digital models. Settings and sample population Seventy TADs were inserted by the direct insertion method in 35 patients who needed palatal TADs for orthodontic anchorage. For each patient, placement was independently planned by the superimposition of lateral cephalograms and corresponding plaster models. After mini-implant placement, impressions were taken with scanbodies. For the measurement of both linear and angle deviations, virtual planning models and postoperative oral scans were compared using 3D software for automatic surface registration and calculations. Results Comparing TADs positioned by the direct method and the digitally planned method, a mean linear distance was found of 2.54 +/- 1.51 mm in the occlusal view and 2.41 +/- 1.33 mm in the sagittal view. No significant difference has been found between TADs positioned in the right and left palatal sides. A mean distance of 7.65 +/- 2.16 mm was found between the tip of the digitally planned TAD and the central incisors root apex. Conclusions Both direct and 3D-assisted TAD insertion methods are safe and accurate in the anterior palate. However, the use of insertion guides facilitates TAD insertion, allowing less-experienced clinicians to use palatal implants

Tooth loss caused by displaced elastic during simple preprosthetic orthodontic treatment

The use of elastics to close a diastema or correct tooth malpositions can create unintended consequences if not properly controlled. The American Association of Orthodontists recently issued a consumer alert, warning of "a substantial risk for irreparable damage" from a new trend called "do-it-yourself" orthodontics, consisting of patients autonomously using elastics to correct tooth position. The elastics can work their way below the gums and around the roots of the teeth, causing damage to the periodontium and even resulting in tooth loss. The cost of implants to replace these teeth would well exceed the cost of proper orthodontic care. This damage could also occur in a dental office, when a general dentist tries to perform a simplified orthodontic correction of a minor tooth malposition. The present case report describes a case of tooth loss caused by a displaced intraoral elastic, which occurred during a simple preprosthetic orthodontic treatment

Immediate versus delayed loading: comparison of primary stability loss after miniscrew placement in orthodontic patients-a single-centre blinded randomized clinical trial

Introduction: The aim of this randomized clinical trial was to compare torque recordings at insertion time and 1 week post-placement between immediately loaded orthodontic miniscrews and an unloaded control group. Trial design: This RCT was designed as parallel with an allocation ratio of 1:1. Methods: Eligibility criteria to enroll patients were: needs of fixed orthodontic treatment, no systemic disease, absence of using drugs altering bone metabolism. All patients were consecutively treated in a private practice and the miniscrews were placed by the same author. Patients received ORTHOImplant (3M Unitek) miniscrews and they were blindly divided in two groups: group 1 screws were unloaded between T0 and T1, group 2 received immediately loaded screws with NiTi coil. For each patient, maximum insertion torque (MIT) was evaluated at T0. After 1 week, without loading, the screw torque was measured again (T1) and at the end of the treatment maximal removal torque was evaluated (T2). Torque variation in the first week was considered as the primary outcome. Randomization: A randomization list was created for the group assignment, with an allocation ratio of 1:1. Blinding: The study was single blinded in regard of the statistical analysis. Results: Patients enrolled in the clinical trial were 51 for a total of 81 miniscrews. The recruitment started in November 2012 and the observation period ended in August 2014. Twenty-six and twenty-five patients were analysed in group 1 and 2, respectively. The MIT mean in each placement time was 18.25 Ncm (SD = 3.00), 11.41 Ncm (SD = 3.51) and 10.52 Ncm (SD = 5.14) at T0, T1, and T2 time, respectively. In group 1, the torque decrease between T1 and T0 was statistically higher compared to group 2 (P value = 0.003). Statistically significant effects of the placement times on MIT were found (P value <0.0001). No serious harm was observed. Limitations: This study was performed using only direct force on the miniscrew and not using the miniscrew as an indirect anchorage. It was not possible to obtain quantitative data on bone quality or root proximity to miniscrews. Conclusions: A significant stability loss was observed in the first week in both groups; Group 1 showed a statistically higher torque loss in the first week when compared to the immediately loaded group. There were statistically significant effects of the measurement times on MIT and of the miniscrew location on MIT. The overall failure rate was 7.4%. Trial registration: This trial was not registered. Protocol: The protocol was not published before trial commencement

Torque loss after miniscrew placement: An in-vitro study followed by a clinical trial

7noTo evaluate torque loss a week after insertion, both in an in vivo and an in vitro experimental setup were designed. In the in vivo setup a total of 29 miniscrews were placed in 20 patients who underwent orthodontic treatment. Maximum insertion torque (MIT) was evaluated at insertion time (T1). A week later, insertion torque was measured again by applying a quarter turn (T2); no load was applied on the screw during the first week. In the in vitro setup a total of 20 miniscrews were placed in pig rib bone samples. MIT was evaluated at insertion time (T1). Bone samples were kept in saline solution and controlled environment for a week during which the solution was refreshed every day. Afterwards, torque was measured again by applying a quarter turn (T2). The comparison of MIT over time was done calculating the percentage difference of the torque values between pre- and post-treatment and using the parametric two independent samples t-test or the non-parametric Mann–Whitney test. After a week unloaded miniscrews showed a mean loss of rotational torque of 36.3% and 40.9% in in vitro and in in vivo conditions, respectively. No statistical differences were found between the two different setups. Torque loss was observed after the first week in both study models; in vitro experimental setup provided a reliable study model for studying torque variation during the first week after insertion.openopenMigliorati, Marco; Drago, Sara; Barberis, Fabrizio; Schiavetti, Irene; Dalessandri, Domenico; Benedicenti, Stefano; Biavati, Armando SilvestriniMigliorati, Marco; Drago, Sara; Barberis, Fabrizio; Schiavetti, Irene; Dalessandri, Domenico; Benedicenti, Stefano; Biavati, Armando Silvestrin

Early diagnostic evaluation of mandibular symmetry using orthopantomogram

AIMS: The aim of this research was to complete Habets's method on orthopantomogram, in order to measure mandibular symmetry horizontally and diagonally in mixed dentition as the first diagnostic evaluation.SETTINGS AND DESIGN: Mixed dentition subjects were consecutively selected according to skeletal maturity.MATERIALS AND METHODS: Inclusion criteria were: Mixed dentition, cervical vertebral stages 1-2, Class II or Class III malocclusions, with or without unilateral posterior cross-bite. Fourteen subjects with cross-bite (mean age 8 y, 9 m) cross group (CG) and 14 subjects with normal transverse occlusion (mean age 8 y, 6m) non-cross group (NCG) were selected. Nine measurements were determined. An asymmetry index was performed for all linear variables.STATISTICAL ANALYSIS USED: NCG patients' data were compared with CG data using parametric t-tests. Probabilities of <0.05 were accepted as significant.RESULTS: In CG, comparing right and left side, single values showed no significant differences up to 6% (twice if compared to the 3% threshold value). T-tests showed statistically significant differences between the groups for ramus + condyle height (index 2.5% vs 4.5%, P = 0.04), condylar height (index 3.7% vs 6.6%, P = 0.02) and mandibular length (index 1.4% vs 2.3%, P = 0.04). Overall CG group was more asymmetrical than NCG.CONCLUSIONS: In mixed dentition (CS1-2), a first appraisal of mandibular symmetry may be performed on orthopantomogram utilizing this modified Habets's method. This tracing method provides an early evaluation about mandibular symmetry and is able to show slight asymmetries in mixed dentition thereby reducing the number of cone beam computed tomograms performed

Anterior open-bite and sucking habits in Italian preschool children

Aim To evaluate the consequences of prolonged sucking habits on the development of the orofacial complex in deciduous dentition. Materials and Methods A cross-sectional study was carried out involving 235 preschool children. A questionnaire for children parents and clinical examinations were carried out by calibrated blinded examiners. The chi-square test and the T-Student test were used for statistical analysis. Results The prevalence of non-nutritive sucking habits (NNSH) in the sample was 74%. Anterior open-bite (AOB) was detected in 18%, and it was significantly related to non-nutritive sucking habits, bottle-feeding (only in the 3-year-old group) and persistent use of pacifier (p<0.05). Conclusions NNSH and type of feeding were important contributing factors in the development of anterior open-bite in deciduous dentition

Manual orthodontic vs. oscillating-rotating electric toothbrush in orthodontic patients: a randomised clinical trial

Studio controllato e randomizzato sull'efficacia dello spazzolamento manuale vs elettrico rotante-oscillante nei pazienti in trattamentoortodontico fiss

Modificazioni dei parametri cefalometrici lineari indotte da trattamento funzionale in pazienti di II^ classe da retrusione mandibolare

ricerca sui risultati dentali e scheletrici ottenuti con 3 differenti apparecchi funzionali in soggetti in II clase scheletrica da retrusione mandibolare, in soggetti in crescit

Three-dimensional superimposition to evaluate impacted canines movement during traction: a case report.

The aim was to evaluate impacted canines movement during traction, through superimposition of three-dimensional models acquired from Cone Beam CT (CBCT) before traction (T0) and three months after (T1), in order to highly precisely measure the movement of impacted canine

Clinical association between teeth malocclusions, wrong posture and ocular convergence disorders: an epidemiological investigation on primary school children

Background: As the various systems in the body are inter-connected to form a single structural unit, a pathological condition in one area can also affect other areas. There are many known correlations between the visual and motor system. The importance of visual function, particularly the paracentral peripheral field of view, in motor coordination, ambulation and the maintenance of balance has been amply demonstrated. In line with current medical principles, which are moving towards a more holistic view of the human body, this study aims to investigate, in an interdisciplinary manner, the incidence of dental malocclusions together with posture and eye convergence disorders. Methods: Six hundred and five children attending at the 3rd, 4th and 5th years of seven Genoa primary schools were examined. Each child underwent the following examinations: (i) dental/occlusal; (ii) orthoptic; and (iii) postural. Occlusal data concerned the presence of cross-bite, midline deviation with a mandibular shift, bad habits and deep or open bite. Postural assessment involved frontal and lateral inspection, investigation during trunk flexion and ambulation, and note of any asymmetry in the lower limbs. The recorded orthoptic data included those pertaining to ocular dominance, a cover test, convergence and the Brock string test. Results: A prevalence of cases with an unphysiological gait was found in patients with overjet (14.70%) or overbite (14.87%), while the percentage of patients with normal occlusion that showed an unphysiological gait was 13.08%. Also, about 93.8%-94.2% of children showed normal legs without dysmetry, with no difference in respect to the type of occlusion. Subjects with an open bite or deep bite showed a slightly different distribution of right or left dominant eyes. Conclusion: About 13% of children showed a pathological gait and, among them, vertical anomalies of occlusion (deep bite or open bite) were prevalent with respect to the other occlusal defects. The vertical dimension of occlusion revealed a slight relationship with the proper dominant eye. Postural, orthoptic, osteopathic and occlusal variables were often clinically associated, and therefore these disorders appear to request a multidisciplinary medical approach for their treatment