Bond Strength of an Amorphous Calcium Phosphate–Containing Orthodontic Adhesive

Objective: To determine whether an amorphous calcium phosphate (ACP)-containing adhesive has an acceptable level of shear bond strength to be used as an orthodontic adhesive. Materials and Methods: Sixty extracted premolars were randomly divided into three groups for orthodontic bonding. Group 1 used a composite resin adhesive (Transbond XT), group 2 was bonded with an ACP-containing adhesive (Aegis Ortho), and group 3 used a resin-modified glass ionomer (Fuji Ortho LC). All bonded teeth were stored in distilled water at 37°C for 40 ± 2 hours prior to debonding. Shear bond strength and adhesive remnant index (ARI) were recorded for each specimen. Results: The mean shear bond strengths for the three test groups were: group 1 (15.2 ± 3.6 MPa), group 2 (6.6 ± 1.5 MPa), and group 3 (8.3 ± 2.8 MPa). A one-way analysis of variance showed a significant difference in bond strengths between the groups. A post hoc Tukey test showed group 1 to be significantly (P \u3c .001) greater than groups 2 and 3. A Kruskal-Wallis test and a Mann-Whitney U-test showed groups 1 and 3 exhibited lower ARI scores than group 2, but a majority of specimens in each group had greater than 50% of the cement removed along with the bracket during debonding. Conclusions: The ACP-containing adhesive demonstrated a low, but satisfactory bond strength needed to function as an orthodontic adhesive

A survey of high level frameworks in block-structured adaptive mesh refinement packages

pre-printOver the last decade block-structured adaptive mesh refinement (SAMR) has found increasing use in large, publicly available codes and frameworks. SAMR frameworks have evolved along different paths. Some have stayed focused on specific domain areas, others have pursued a more general functionality, providing the building blocks for a larger variety of applications. In this survey paper we examine a representative set of SAMR packages and SAMR-based codes that have been in existence for half a decade or more, have a reasonably sized and active user base outside of their home institutions, and are publicly available. The set consists of a mix of SAMR packages and application codes that cover a broad range of scientific domains. We look at their high-level frameworks, their design trade-offs and their approach to dealing with the advent of radical changes in hardware architecture. The codes included in this survey are BoxLib, Cactus, Chombo, Enzo, FLASH, and Uintah

Effect of Toothbrushing On Shade and Surface Roughness of Extrinsically Stained Pressable Ceramics

Statement of problem The effect of toothbrushing on extrinsically stained pressable ceramic materials is unknown. Purpose The purpose of this in vitro study was to investigate the effects of toothbrushing on the shade and surface roughness of extrinsically stained, pressable ceramics. Material and Methods Two materials, leucite-based (IPS Empress Esthetic [EE]; Ivoclar Vivadent AG) and lithium disilicate-based ceramic (IPS e.max Press [EP]; Ivoclar Vivadent AG), were studied. For each material, 24 disk-shaped specimens, 10 mm (diameter)×3 mm (height) were fabricated. Three different methods (n=8) of applying extrinsic stains were performed on each material: glazed only (G, control group); stained then glazed (SG); and stained and glazed together (T). The specimens were brushed with a multistation brushing machine under a load of 1.96 N at a rate of 90 strokes per minute with a soft and straight toothbrush (Oral-B #35) and a 1:1 toothpaste and distilled water slurry. Shade and roughness were measured at baseline and at 72, 144, 216, and 288 hours, which is equivalent to 3, 6, 9, and 12 years of simulated toothbrushing for 2 minutes twice a day. A repeated measures ANOVA with staining technique as a fixed factor was used to evaluate shade and roughness (α=.05). Results For EE groups, no significant change was found after 12 years of simulated toothbrushing regarding shade and surface roughness, irrespective of staining techniques (P\u3e.05). However, EP groups demonstrated a significant shade change and an increase in surface roughness after 12 years of simulated toothbrushing. Shade change was found to depend on the method of applying stain. For the EP-SG technique, a significant shade change was observed only at the 9- to 12-year interval (P=.047). However, the EP-T technique demonstrated a significant difference in shade between baseline and 3 years (P=.005) and in the 6- to 9-year interval (P=.005). Surface roughness was only significantly affected at baseline and 3 years for the EP-T group (P=.005). Conclusions For the shade and surface roughness of the EE groups, no statistically significant difference was found after 12 years of toothbrushing, irrespective of the staining technique. The shade and surface roughness of the EP groups were significantly statistically affected by toothbrushing time; only shade changes were found to depend on technique

Understanding, Assessing, and Mitigating Safety Risks in Artificial Intelligence Systems

Prepared for: Naval Air Warfare Development Center (NAVAIR)Traditional software safety techniques rely on validating software against a deductively defined specification of how the software should behave in particular situations. In the case of AI systems, specifications are often implicit or inductively defined. Data-driven methods are subject to sampling error since practical datasets cannot provide exhaustive coverage of all possible events in a real physical environment. Traditional software verification and validation approaches may not apply directly to these novel systems, complicating the operation of systems safety analysis (such as implemented in MIL-STD 882). However, AI offers advanced capabilities, and it is desirable to ensure the safety of systems that rely on these capabilities. When AI tech is deployed in a weapon system, robot, or planning system, unwanted events are possible. Several techniques can support the evaluation process for understanding the nature and likelihood of unwanted events in AI systems and making risk decisions on naval employment. This research considers the state of the art, evaluating which ones are most likely to be employable, usable, and correct. Techniques include software analysis, simulation environments, and mathematical determinations.Naval Air Warfare Development CenterNaval Postgraduate School, Naval Research Program (PE 0605853N/2098)Approved for public release. Distribution is unlimite

Physical Properties of Denture Base Resins Potentially Resistant to \u3cem\u3eCandida\u3c/em\u3e Adhesion

Purpose: The addition of anionic charge on denture base resins has been shown to inhibit Candida albicans adhesion and to facilitate adsorption of salivary defense molecules. The aim of this study was to evaluate the physical properties of a modified denture base resin for denture fabrication. Materials and Methods: Specimens made from heat polymerizing resin Lucitone 199 were used as the control group. The two experimental groups, E-10 and E-20, had 10% and 20%, respectively, of the monomer substituted with an experimental phosphate-containing monomer. Flexural strength and modulus, water sorption, solubility, and color stability tests were conducted to ensure compliance with ADA specification No. 12. Water diffusion coefficient into the resins and stainability were also assessed. ANOVA and Scheffé tests were performed for statistical significance. Results: There was an overall decline in all properties with the addition of the experimental phosphate compound. The flexural strength and modulus, water sorption and solubility for E-10, as well as the control were, however, within the ADA specifications. The diffusion coefficients were significantly different (p \u3c 0.05) for the three groups. Staining and color specimens showed no significant difference (p \u3e 0.05) among the three groups. Conclusions: Within the limitations of this study, the physical properties of the phosphate denture base resin at 10% should be suitable for denture fabrication based on the properties assessed

The Productive Longevity Of Perennial Grasses Swards Depending On The Npk Fertilizer Rates

The longevity and producing capacity of perennial grasses swards was studied on mineral soils at the LUA Research Institute of Agriculture in long-term experiment during 1974-2010. There were applied lime and mineral fertilizers with different NPK doses (0-400 kg ha-1) protractedly many years. In such way there formed soils with various content of P, K, organic matter content and pHKCl level as well. Research results showed that liming of soils and using of mineral fertilizer changed not only productivity of grass mixtures but also botanical composition. Mineral fertilizer N200P100K300 provided the highest yield of dry matter – 7.32 - 12.0 t ha-1 and optimal botanical composition of a sward during many years. On unlimed soils (pHKCL less then 4.0 in 1997) dry matter yields of grass sward was substantially lower and there was observed disappearance of seeded valuable grasses out of the sward and increase of herbs and non-seeded grasses –Festuca rubra L., Agrostis tenuis Sibth., Taraxacum officinale Wigg. and others. Liming of soils increased dry matter yield in treatments with high doses of N (300-400) fertilizer

Bonding with Self-etching Primers – Pumice or Pre-etch? An \u3cem\u3ein vitro\u3c/em\u3e Study

The purpose of this study was to compare the shear bond strengths (SBSs) of orthodontic brackets bonded with self-etching primer (SEP) using different enamel surface preparations. A two-by-two factorial study design was used. Sixty human premolars were harvested, cleaned, and randomly assigned to four groups (n = 15 per group). Teeth were bathed in saliva for 48 hours to form a pellicle. Treatments were assigned as follows: group 1 was pumiced for 10 seconds and pre-etched for 5 seconds with 37 per cent phosphoric acid before bonding with SEP (Transbond Plus). Group 2 was pumiced for 10 seconds before bonding. Group 3 was pre-etched for 5 seconds before bonding. Group 4 had no mechanical or chemical preparation before bonding. All teeth were stored in distilled water for 24 hours at 37°C before debonding. The SBS values and adhesive remnant index (ARI) score were recorded. The SBS values (±1 SD) for groups 1–4 were 22.9 ± 6.6, 16.1 ± 7.3, 36.2 ± 8.2, and 13.1 ± 10.1 MPa, respectively. Two-way analysis of variance and subsequent contrasts showed statistically significant differences among treatment groups. ARI scores indicated the majority of adhesive remained on the bracket for all four groups. Pre-etching the bonding surface for 5 seconds with 37 per cent phosphoric acid, instead of pumicing, when using SEPs to bond orthodontic brackets, resulted in greater SBSs

Bonding with Self-etching Primers – Pumice or Pre-etch? An \u3cem\u3ein vitro\u3c/em\u3e Study

The purpose of this study was to compare the shear bond strengths (SBSs) of orthodontic brackets bonded with self-etching primer (SEP) using different enamel surface preparations. A two-by-two factorial study design was used. Sixty human premolars were harvested, cleaned, and randomly assigned to four groups (n = 15 per group). Teeth were bathed in saliva for 48 hours to form a pellicle. Treatments were assigned as follows: group 1 was pumiced for 10 seconds and pre-etched for 5 seconds with 37 per cent phosphoric acid before bonding with SEP (Transbond Plus). Group 2 was pumiced for 10 seconds before bonding. Group 3 was pre-etched for 5 seconds before bonding. Group 4 had no mechanical or chemical preparation before bonding. All teeth were stored in distilled water for 24 hours at 37°C before debonding. The SBS values and adhesive remnant index (ARI) score were recorded. The SBS values (±1 SD) for groups 1–4 were 22.9 ± 6.6, 16.1 ± 7.3, 36.2 ± 8.2, and 13.1 ± 10.1 MPa, respectively. Two-way analysis of variance and subsequent contrasts showed statistically significant differences among treatment groups. ARI scores indicated the majority of adhesive remained on the bracket for all four groups. Pre-etching the bonding surface for 5 seconds with 37 per cent phosphoric acid, instead of pumicing, when using SEPs to bond orthodontic brackets, resulted in greater SBSs

Generalization Per Category: Theory And Application

The concept of Generalization Per Category (GPO is formalized. It is shown that GPC imposes lattice structures on entity types and their subtypes. A high level application oriented data definition language based on the GPC is outlined which allows the system to derive general entity types and organize their instances. Users are freed from undue efforts in the design of databases which are about entity types with rich varieties and high populations. Effective browsing of these databases and efficient execution of frequent queries against them are achieved by using the lattice structures among the entity types and their subtypes