4,510 research outputs found
Study of advanced rotary combustion engines for commuter aircraft
Performance, weight, size, and maintenance data for advanced rotary aircraft engines suitable for comparative commuter aircraft system evaluation studies of alternate engine candidates are provided. These are turbocharged, turbocompounded, direct injected, stratified charge rotary engines. Hypothetical engines were defined (an RC4-74 at 895 kW and an RC6-87 at 1490 kW) based on the technologies and design approaches used in the highly advanced engine of a study of advanced general aviation rotary engines. The data covers the size range of shaft power from 597 kW (800 hp) to 1865 kW (2500 hp) and is in the form of drawings, tables, curves and written text. These include data on internal geometry and configuration, installation information, turbocharging and turbocompounding arrangements, design features and technologies, engine cooling, fuels, scaling for weight size BSFC and heat rejection for varying horsepower, engine operating and performance data, and TBO and maintenance requirements. The basic combustion system was developed and demonstrated; however the projected power densities and performance efficiencies require increases in engine internal pressures, thermal loading, and rotative speed
Testing of a one-bladed 30-meter-diameter rotor on the DOE/NASA Mod-O wind turbine
Tests were conducted on the DOE/NASA Mod-O 200-kW horizontal-axis wind turbine in a one-bladed rotor configuration. The objectives of the test were to evaluate the performance, loads, and dynamic characteristics of a one-bladed rotor, and then to compare these parameters with those of an aerodynamically similar two-bladed rotor configuration. Test operations showed that this intermediate-size (15.2-m radius) one-bladed rotor configuration can be operated successfully. Test results show that the one-bladed rotor had cyclic blade loads comparable to those of a two-bladed rotor. A moderate power penalty equivalent to a reduction in windspeed of 1 m/sec occurred with the one-bladed rotor when operated at a rotor speed 50 percent higher than that of the two-bladed rotor
Ab Initio Liquid Hydrogen Muon Cooling Simulations with ELMS in ICOOL
This paper presents new theoretical results on the passage of muons through
liquid hydrogen which have been confirmed in a recent experiment. These are
used to demonstrate that muon bunches may be compressed by ionisation cooling
more effectively than suggested by previous calculations.
Muon cooling depends on the differential cross section for energy loss and
scattering of muons. We have calculated this cross section for liquid H2 from
first principles and atomic data, avoiding traditional assumptions. Thence, 2-D
probability maps of energy loss and scattering in mm-scale thicknesses are
derived by folding, and stored in a database. Large first-order correlations
between energy loss and scattering are found for H2, which are absent in other
simulations. This code is named ELMS, Energy Loss & Multiple Scattering. Single
particle trajectories may then be tracked by Monte Carlo sampling from this
database on a scale of 1 mm or less. This processor has been inserted into the
cooling code ICOOL. Significant improvements in 6-D muon cooling are predicted
compared with previous predictions based on GEANT. This is examined in various
geometries. The large correlation effect is found to have only a small effect
on cooling. The experimental scattering observed for liquid H2 in the MUSCAT
experiment has recently been reported to be in good agreement with the ELMS
prediction, but in poor agreement with GEANT simulation.Comment: 6 pages, 3 figure
Self-similar magnetoresistance of Fibonacci ultrathin magnetic films
We study numerically the magnetic properties (magnetization and
magnetoresistance) of ultra-thin magnetic films (Fe/Cr) grown following the
Fibonacci sequence. We use a phenomenological model which includes Zeeman,
cubic anisotropy, bilinear and biquadratic exchange energies. Our physical
parameters are based on experimental data recently reported, which contain
biquadratic exchange coupling with magnitude comparable to the bilinear
exchange coupling. When biquadratic exchange coupling is sufficiently large a
striking self-similar pattern emerges.Comment: 5 pages, 5 EPS figures, REVTeX, accepted for publication in Phys.
Rev.
Advanced stratified charge rotary aircraft engine design study
A technology base of new developments which offered potential benefits to a general aviation engine was compiled and ranked. Using design approaches selected from the ranked list, conceptual design studies were performed of an advanced and a highly advanced engine sized to provide 186/250 shaft Kw/HP under cruise conditions at 7620/25,000 m/ft altitude. These are turbocharged, direct-injected stratified charge engines intended for commercial introduction in the early 1990's. The engine descriptive data includes tables, curves, and drawings depicting configuration, performance, weights and sizes, heat rejection, ignition and fuel injection system descriptions, maintenance requirements, and scaling data for varying power. An engine-airframe integration study of the resulting engines in advanced airframes was performed on a comparative basis with current production type engines. The results show airplane performance, costs, noise & installation factors. The rotary-engined airplanes display substantial improvements over the baseline, including 30 to 35% lower fuel usage
Linear-scaling time-dependent density-functional theory beyond the Tamm-Dancoff approximation: Obtaining efficiency and accuracy with in situ optimised local orbitals.
We present a solution of the full time-dependent density-functional theory (TDDFT) eigenvalue equation in the linear response formalism exhibiting a linear-scaling computational complexity with system size, without relying on the simplifying Tamm-Dancoff approximation (TDA). The implementation relies on representing the occupied and unoccupied subspaces with two different sets of in situ optimised localised functions, yielding a very compact and efficient representation of the transition density matrix of the excitation with the accuracy associated with a systematic basis set. The TDDFT eigenvalue equation is solved using a preconditioned conjugate gradient algorithm that is very memory-efficient. The algorithm is validated on a small test molecule and a good agreement with results obtained from standard quantum chemistry packages is found, with the preconditioner yielding a significant improvement in convergence rates. The method developed in this work is then used to reproduce experimental results of the absorption spectrum of bacteriochlorophyll in an organic solvent, where it is demonstrated that the TDA fails to reproduce the main features of the low energy spectrum, while the full TDDFT equation yields results in good qualitative agreement with experimental data. Furthermore, the need for explicitly including parts of the solvent into the TDDFT calculations is highlighted, making the treatment of large system sizes necessary that are well within reach of the capabilities of the algorithm introduced here. Finally, the linear-scaling properties of the algorithm are demonstrated by computing the lowest excitation energy of bacteriochlorophyll in solution. The largest systems considered in this work are of the same order of magnitude as a variety of widely studied pigment-protein complexes, opening up the possibility of studying their properties without having to resort to any semiclassical approximations to parts of the protein environment.T.J.Z. acknowledges the support of EPSRC under Grant No. EP/J017639/1 and the ARCHER eCSE programme. M.C.P. and P.D.H. acknowledge the support of EPSRC under Grant No. EP/J015059/1. The underlying data of this publication can be accessed via the following persistent URI: https://www.repository.cam.ac.uk/handle/1810/251293This is the author accepted manuscript. The final version is available from AIP via http://dx.doi.org/10.1063/1.493628
Job Growth in Early Transition: Comparing Two Paths
Small start-up firms are the engine of job creation in early transition and yet little is known about the characteristics of this new sector. We seek to identify patterns of job growth in this sector in terms of niches left from central planning and ask about differences in job creation across two different transition economies: Estonia, which experienced rapid destruction of the pre-existing firms, and the Czech Republic, which reduced the old sector gradually. We find job growth within industries to be quantitatively more important than job growth due to across-industry reallocation. Furthermore, the industrial composition of startups is strikingly similar in the two countries. We offer convergence to "western" industry firm-size distributions as an explanation. We also find regularities in wage evolution across new and old firms, including small differences in job quality across the two transition paths.http://deepblue.lib.umich.edu/bitstream/2027.42/39888/3/wp503.pd
Investigation of lunar surface chemical contamination by LEM descent engine and associated equipment Final report
Lunar surface contamination from LEM rocket exhaust - methods of minimizing sample contaminatio
Silicon-based molecular electronics
Molecular electronics on silicon has distinct advantages over its metallic
counterpart. We describe a theoretical formalism for transport through
semiconductor-molecule heterostructures, combining a semi-empirical treatment
of the bulk silicon bandstructure with a first-principles description of the
molecular chemistry and its bonding with silicon. Using this method, we
demonstrate that the presence of a semiconducting band-edge can lead to a novel
molecular resonant tunneling diode (RTD) that shows negative differential
resistance (NDR) when the molecular levels are driven by an STM potential into
the semiconducting band-gap. The peaks appear for positive bias on a p-doped
and negative for an n-doped substrate. Charging in these devices is compromised
by the RTD action, allowing possible identification of several molecular
highest occupied (HOMO) and lowest unoccupied (LUMO) levels. Recent experiments
by Hersam et al. [1] support our theoretical predictions.Comment: Author list is reverse alphabetical. All authors contributed equally.
Email: rakshit/liangg/ ghosha/[email protected]
Quantum Relaxation of Magnetisation in Magnetic Particles
At temperatures below the magnetic anisotropy energy, monodomain magnetic
systems (small particles, nanomagnetic devices, etc.) must relax quantum
mechanically. This quantum relaxation must be mediated by the coupling to both
nuclear spins and phonons (and electrons if either particle or substrate is
conducting. We analyze the effect of each of these couplings, and then combine
them. Conducting systems can be modelled by a "giant Kondo" Hamiltonian, with
nuclear spins added in as well. At low temperatures, even microscopic particles
on a conducting substrate (containing only spins) will have their
magnetisation frozen over millenia by a combination of electronic dissipation
and the "degeneracy blocking" caused by nuclear spins. Raising the temperature
leads to a sudden unblocking of the spin dynamics at a well defined
temperature. Insulating systems are quite different. The relaxation is strongly
enhanced by the coupling to nuclear spins. At short times the magnetisation of
an ensemble of particles relaxes logarithmically in time, after an initial very
fast decay; this relaxation proceeds entirely via the nuclear spins. At longer
times phonons take over, but the decay rate is still governed by the
temperature-dependent nuclear bias field acting on the particles - decay may be
exponential or power-law depending on the temperature. The most surprising
feature of the results is the pivotal role played by the nuclear spins. The
results are relevant to any experiments on magnetic particles in which
interparticle dipolar interactions are unimportant. They are also relevant to
future magnetic device technology.Comment: 30 pages, RevTex, e:mail , Submitted to J.Low
Temp.Phys. on 1 Nov. 199
- …