51 research outputs found

    Formulation and characterization of self compacting concrete with silica fume

    Get PDF
    Self-compacting concrete (SCC) was elaborated using local materials and silica fume (SF) as admixture in 15% of cement quantity, two different Portland cements (PC) and two different superplasticizer that the chemical nature is polycarboxylate and plynaphtalene, the aggregates used are (AG 3/8 mm, AG 8/15 mm), coarse and fine sand (SC, SF) witch fineness modulus 3.2 and 1 in the order. The dosage of the different superplasticizer used is chosen after experimental spreading tests of each self compacting concrete formulation. Results of fresh concrete tests executed, as L-box and segregation resistance are on concordance whit values recommended by the French association of civil engendering. Also the mechanical characterization was conducted by compressive strength and splitting compression testing procedure, results values are in the range higher than 20 Mpa at the seven day by the compressive test for the all compositions, and the highest value was 40.93 MPa at the 28 day bay compressive test of the fourth’s formulation specimens, the values of splitting compressive tests of al formulation specimens at 7, 14 and 28 days, was situated between 2.01 and 4.40 MPa. In order to determine the superplasticizer saturation assay in of cement pasts used in self compacting concrete, the stady was completed by a rheological stady with a variable velocity gradient, so as to estimate the quantity of saturation assay of superplasticizer and the formulation, also the flow models of cement past

    External And Internal Control Compressors For Mobile Air-Conditioning Systems

    Get PDF

    Analysis of the Sub-Cooling on Refrigerating Systems Using R-410A or R-404A

    Get PDF

    Etude et Minimisation des consommations des systèmes de climatisation automobile

    No full text
    PARIS-MINES ParisTech (751062310) / SudocSudocFranceF

    Att leva med smärta vid endometrios : - en litteraturstudie

    No full text
    Bakgrund: Endometrios är en kronisk och gynekologisk sjukdom som påverkar kvinnor födda med livmoder. Det är ca 10 % av alla kvinnor i världen som lider av endometrios. Vid endometrios växer slemhinnan utanför livmodern och fastnar på fel ställen i kroppen, främst på organ i buken. Sjukdomen kan orsaka mycket smärtor och lidande för de kvinnor som drabbas. Syfte: Syftet var att beskriva kvinnors upplevelser av att leva med smärta vid endometrios  Metod: Enlitteraturstudie baserad på nio kvalitativa artiklar genom en systematisk sökning och en manuell sökning. Innehållsanalysen genomfördes enligt Granheim & Lundmans beskrivning med ett manifest förhållningssätt och med latenta inslag. Resultat: Analysen resulterade i fyra huvudkategorier: Ansträngda relationer, själslig smärta, hinder vid utbildning och karriär samt bristande energi. Ett övergripande tema kunde formuleras vilket var Den ständigt närvarande smärtan. I kategorin Ansträngda relationerframkom att smärta påverkar alla slags relationer, i Själslig smärtaframkom det att kvinnor blir isolerade och känner sig ensamma i sin sjukdom. Kategorin Hinder vid utbildning ochkarriärvisade att arbete och skolgång påverkas negativt av smärtan och i kategorin Bristande energikom det fram att kvinnor hade sömnsvårigheter och kunde inte utföra vissa aktiviteter som en konsekvens av smärtan. Slutsats: Sjuksköterskor bör ha kunskap om endometrios för att kunna ge goda råd och lindra onödigt lidande. Ett centralt fynd i denna studie var att smärta påverkade kvinnornas liv negativt. Kvinnorna upplevde att de var ensamma i sin sjukdom och varken omgivningen eller sjukvården hade förståelse för dem. Detta leder till höga kostnader för sjukvården, samhället och för kvinnorna på så sätt att deras arbete, utbildning och karriärer påverkas negativt.  Kvinnorna med endometrios behöver få kontinuitet inom vården från olika professioner för att kunna hantera smärtan. Därav är det viktigt att sjuksköterskan arbetar i team med andra professioner.

    The Effects of Calcium Carbonate Filler on HDPE Pipe

    No full text
    The objective of this work is the preparation and the characterization of high density polyethylene /calcium carbonate (HDPE/CaCO3) composites. Polyethylene composites, containing 10-35 wt. % of CaCO3 and HDPE with MFI (Melt Flow index) (0.550 g/10mn) were prepared with co-extrusion process using extruder type Cincinati 90D. Thermal and mechanical studies were made in order to determine the parameters for obtaining a material (corrugated pipe) with optimal properties. The composite viscosity increased with filler content, suggesting the formation of filler agglomerates. Thermal analysis shows that addition of 30 % CaCO3 increased the thermal stability of HDPE around 32°C, decreasing the processing temperature of composites in 15°C. Regarding to the mechanical tests, the ring stiffness of the composites decreased with the addition of CaCO3. According to the obtained results, we suggest that HDPE/CaCO3 composites could be used in the pipe production where tensile strengths higher than 25 MPa are not required and for service temperatures between 30°C and 70°C
    corecore