5,222 research outputs found
A well-balanced meshless tsunami propagation and inundation model
We present a novel meshless tsunami propagation and inundation model. We
discretize the nonlinear shallow-water equations using a well-balanced scheme
relying on radial basis function based finite differences. The inundation model
relies on radial basis function generated extrapolation from the wet points
closest to the wet-dry interface into the dry region. Numerical results against
standard one- and two-dimensional benchmarks are presented.Comment: 20 pages, 13 figure
Teaching Practical Engineering for Freshman Students Using the RWTH - Mindstorms NXT Toolbox for MATLAB
Open Access
Malaria knowledge and utilization of chemoprophylaxis in the UK population and in UK passengers departing to malaria-endemic area
Experimental and numerical characterization method for forming behavior of thermoplastics reinforced with woven fabrics
The automotive and aviation industry has to achieve significant weight reduction in order to fulfil legal obligations. This leads to an increasing use of new materials or new material combinations like fibre-reinforced plastics (FRP) as they provide a high lightweight potential due to the combination of low density and high tensile strength. Meanwhile pre-impregnated sheets with a thermoplastic matrix reinforced with woven carbon fibres are commercially available. This has led in a significant cost reduction and hence, the FRP have become affordable for large scale production. The material properties, in particular the forming and failure behaviour of the FRP, differ strongly from that of conventional metal materials like steel or aluminium. Therefore, new material characterisation techniques, investigation methods as well as numerical models are required. The main focus of this paper lies on the development of a non-orthogonal material model for the FRP, its implementation in a commercial FE-software as well as on the use of a combined experimental-numerical procedure for material characterisation. Since the properties of these materials are strongly temperature dependent, the forming process of reinforced thermoplastics is typically carried out at elevated temperatures. Thus, temperature sensitivity has to be taken into account during experimental testing as well as in the model approach. The model parameterisation is carried out based on an iterative numerical optimization procedure. For this purpose, the experimentally obtained results are investigated by means of digital image correlation and linked with the numerical model in combination with an automated optimization process
Experimental-numerical approach to efficient TTT-generation for simulation of phase transformations in thermomechanical forming processes
Residual stresses in components are an important issue in most manufacturing processes, as they influence the performance of the final part. Regarding hot forming processes there is a great potential of defining a targeted residual stress state, due to numerous adjustment parameters like deformation state or temperature profile. In order to ensure appropriate numerical modelling of resulting residual stresses in a thermomechanical process, comprehensive material data regarding phase transformation are required. This paper presents an experimental-numerical procedure to efficiently determine time-temperature-transformation diagrams for cooling simulations after hot forming. The transformation behaviour of the steel alloys 42CrMo4 and 100Cr6 is determined by experiments as well as FE-simulations. Finally, the simulation model is validated by dilatometric experiments and metallographic investigations
Stress-state dependent fracture characterisation and modelling of an AZ31 magnesium sheet alloy at elevated temperatures
Due to a high specific strength, magnesium alloys have a high potential to be considered for lightweight solutions in automotive industry. For the numerical design of forming processes, it is important to describe the yielding as well as the fracture behaviour of a material as precisely as possible. In order to fully characterise the fracture behaviour of an AZ31 magnesium sheet alloy at elevated temperatures, a heated test setup for uniaxial tensile machines was developed. The setup allows an adjustment of the load application angle whereby a stress variation is achieved in the centre of the specimen. In order to determine the fracture strain for different temperatures and for varying stress states, a shear stress specimen (also known as butterfly specimen) was considered to perform mechanical experiments by means of this setup. Using numerical simulations, the specific stress development and strain value in the fracture zone, which is needed to calibrate stress state fracture models, was determined for each loading angle and temperature. For this purpose, an orthotropic yield criterion CPB06, which is suitable for depiction of the particular flow behaviour of magnesium alloys (e. g. compression-tension asymmetry), was used. By this means, sufficient data for the calibration of common stress state based fracture models could be provided and the MMC- (Modified Mohr-Coulomb) fracture model was parameterised
О возможности использования индуктивного параметрона для защиты от замыканий на землю в сетях с изолированной нейтралью
Показана возможность использования индуктивного параметрона как реагирующего органа в защитах от замыканий на землю в сетях с изолированной нейтралью. Защита с параметроном является селективной и равночувствительной, обладает достаточной чувствительностью
Эффективность использования жидкофазных огнетушащих составов на объектах энергетики
В данной статье рассматривается использование существующих огнетушащих составов. Более подробно освещается вопрос применения жидкофазных огнетушащих составов на объектах энергетики, дается их сравнительный анализ, и по соответствующим критериям оценки таких веществ определяется наиболее эффективный
Complementary Observables for the Determination of |Vub| in Inclusive Semileptonic B Decays
The determination of |Vub| from inclusive semileptonic B decays is limited by
uncertainties in modelling the decay distributions in b->ulnu transitions. The
largest uncertainties arise from the limited knowledge of the appropriate b
quark mass and Fermi momentum to use in the parameterization of the shape
function. This paper presents a new method in which these shape function
parameters are constrained by the same data used to measure |Vub|. The method
requires measurements of the momenta of both the charged lepton and the
neutrino in semileptonic B decays. From these quantities two complementary
observables can be constructed, one for discriminating between b->ulnu
transitions and background and the other for constraining the shape function.
Using this technique the uncertainties in |Vub| from the shape function may be
significantly reduced.Comment: 8 pages, 3 figure
Advanced Wear Simulation for Bulk Metal Forming Processes
In the recent decades the finite element method has become an essential tool for the cost-efficient virtual process design in the metal forming sector in order to counter the constantly increasing quality standards, particularly from the automotive industry as well as intensified international competition in the forging industry. An optimized process design taking precise tool wear prediction into account is a way to increase the cost-efficiency of the bulk metal forming processes. The main objective of the work presented in this paper is a modelling algorithm, which allows predicting die wear with respect to a geometry update during the forming simulation. Changes in the contact area caused by geometry update lead to the different die wear distribution. It primarily concerns the die areas, which undergo high thermal and mechanical loads
- …