Numerical simulation of solar radiation, air flow and temperature distribution in a naturally ventilated tunnel greenhouse

 Catherine Baxevanou1, Dimitrios Fidaros1, Thomas Bartzanas1, Constantinos Kittas1,2(1. Center for Research and Technology-Thessaly, Institute of Technology and Management of Agricultural Ecosystems, Technology Park of Thessaly, 1st Industrial Area, 38500 Volos;2. University of Thessaly, Department of Agriculture, Crop Production and Agricultural Environment, Fytokou St., N. Ionia, GR-38446, Magnesia, Greece) Abstract: The effect of solar radiation distribution in a typical agricultural building was numerically investigated, taking into account the thickness of the cover, its spectral optical and thermal properties.  A two dimensional mesh was used to render the building's geometry, and the Discrete Ordinate (DO) model for simulating the radiation, taking into accounts its spectral distribution in three wavelength bands.  Based on the meteorological data of October for the region of Volos (Greece), two parametric studies were carried out, dealing with the variation of intensity and angle of the incoming solar radiation and with the optical properties differentiation of covering materials.  The flow recirculation, due to the buoyancy effect, showed the importance of internal temperature gradients, although forced convection which resulted from natural ventilation was dominant.  It was concluded that cover material with high absorptivity deteriorate the natural ventilation increasing the air temperature by convection, and favoring the development of secondary recirculation where the air is trapped.  Furthermore, high absorptivity reduces the available Photosynthetically Active Radiation (PAR) but it distributes it equally inside the greenhouse.  Finally, the ability of the material to transmit the solar irradiance in the wavelengths corresponding to PAR with comparable absorptivity improved as the refractive index decreased.Keywords: greenhouse, microclimate, CFD, radiation, mixed heat transfer, ventilation, Greece Citation: Catherine Baxevanou, Dimitrios Fidaros, Thomas Bartzanas, Constantinos Kittas.  Numerical simulation of solar radiation, air flow and temperature distribution in a naturally ventilated tunnel greenhouse.  Agric Eng Int: CIGR Journal, 2010, 12(3): 48-67. &nbsp

Assessment of Various Trombe Wall Geometries with CFD Study

An investigation of the optimal geometric configuration of a Trombe wall is presented with simulation of the transfer phenomena, that take place during its operation, using computational fluid dynamics. A numerical model is developed for a 2D steady-state simulation of a Trombe wall cross-section operation, and it is validated against an energy balance model’s results. Then the developed model is used for the evaluation of 10 different geometrical configurations examining various air gap widths, storage wall thicknesses, ventilation slots distances, and ventilation slots diameters. The examined geometries were evaluated with respect to the achieved temperature at the air gap exit and at the room facing storage wall surface, the achieved mass air flow in the air gap, and the ability of warm air stream from the gap to enter the test room. The aim was to ventilate the whole space without leaving large areas where the air just recirculates unaffected by the Trombe wall operation. According to the above-described criteria, optimum solution is an air gap width of 5 to 8 cm with increased distance between ventilation slots and a configuration of upper ventilation slot with an inclination of 30 degrees

Design and Optimization of a Hybrid Solar–Wind Power Generation System for Greenhouses

The climate crisis and energy price increases make energy supply a crucial parameter in the design of greenhouses. One way to tackle both these issues is the local production of energy from renewable sources. Since the permitted photovoltaic power installation on a greenhouse roof is limited by the need for an adequate amount of photosynthetically active radiation at the crop level, the necessity of designing a hybrid production system combining different renewable sources, storage systems, and conventional sources arises. The present work addresses the multifactorial problem of the optimal design (in terms of energy production quality, produced electricity price and CO2 emissions) of a hybrid power generation system (photovoltaics/wind turbine/accumulators/oil generating unit) to meet greenhouse needs. The design accounts for the needs of production (for tomato cultivation) for different combinations of production and energy equipment (for microclimate management). Extended parametric studies for available solar and wind potential and energy demand are used to generalize the conclusions. Special attention is given to the contribution of various wind turbine sizes. The effect of greenhouse orientation and of photovoltaic modules arrangement on arched roofs is also examined and the different greenhouse energy systems are assessed in terms of energy cost and environmental footprint

Simulation of Radiation and Crop Activity in a Greenhouse Covered with Semitransparent Organic Photovoltaics

A solution to the problem of reduction of available photosynthetically active radiation (PAR) due to the cover with conventional opaque photovoltaics (PV) of greenhouses is the use of semitransparent PV. The question is how dense the semitransparent PV should be and how dense the coverage should be in order not to burden plant growth. The present paper assesses the effect of the use of semitransparent organic photovoltaics (OPV) on the greenhouse roof cover on the available PAR inside the greenhouse. The method used is to simulate the transmission of radiation through the cover and into the greenhouse with computational fluid dynamics (CFD) using the discrete ordinates (DO) model. Three combinations of OPV/cover that give a normal (perpendicular) transmittance to PAR of 30%, 45%, and 60%, defining the required PV covering, were examined. Then the radiation transmission during eight indicative solar days was simulated. The results are given in terms of available PAR radiation inside the greenhouse and of crop photosynthesis rate, comparing them with the results of a polyethylene cover without OPVs and external conditions. The reduction observed to the mean daily PAR radiation integral for the cases with normal PAR transmittance of 30%, 45%, and 60% in relation to the bare polyethylene (PE) was 77%, 66%, and 52%, respectively while the respective simulated reduction to the daily average photosynthesis rate was 33%, 21%, and 12%, respectively. Finally, the yearly power production from the OPV per greenhouse length meter for the cases with normal PAR transmittance of 30%, 45%, and 60% was 323, 242, and 158 kWh m−1 y−1, respectively. The results of this work could be further used for the optimization of greenhouse design for maximizing the PAR at the crop level