Design and Operation of Biomass Circulating Fluidized Bed Boiler with High Steam Parameter

Two circulating fluidized bed(CFB) boilers with capacity of 12 MWe and 25 MWe, respectively, with biomass as fuel, adopting the basic technology independently developed by Institute of Engineering Thermophysics (IET), Chinese Academy of Sciences, have been in commercial operation since March 2010 in China. This paper focuses on the design principles, the design specifications and operating results of the two CFB boilers

In-Orbit Instrument Performance Study and Calibration for POLAR Polarization Measurements

POLAR is a compact space-borne detector designed to perform reliable measurements of the polarization for transient sources like Gamma-Ray Bursts in the energy range 50-500keV. The instrument works based on the Compton Scattering principle with the plastic scintillators as the main detection material along with the multi-anode photomultiplier tube. POLAR has been launched successfully onboard the Chinese space laboratory TG-2 on 15th September, 2016. In order to reliably reconstruct the polarization information a highly detailed understanding of the instrument is required for both data analysis and Monte Carlo studies. For this purpose a full study of the in-orbit performance was performed in order to obtain the instrument calibration parameters such as noise, pedestal, gain nonlinearity of the electronics, threshold, crosstalk and gain, as well as the effect of temperature on the above parameters. Furthermore the relationship between gain and high voltage of the multi-anode photomultiplier tube has been studied and the errors on all measurement values are presented. Finally the typical systematic error on polarization measurements of Gamma-Ray Bursts due to the measurement error of the calibration parameters are estimated using Monte Carlo simulations.Comment: 43 pages, 30 figures, 1 table; Preprint accepted by NIM

Heterogeneous and flexible transmission of mcr-1 in hospital-associated escherichia coli

The recent emergence of a transferable colistin resistance mechanism, MCR-1, has gained global attention because of its threat to clinical treatment of infections caused by multidrug-resistant Gram-negative bacteria. However, the possible transmission route of mcr-1 among Enterobacteriaceae species in clinical settings is largely unknown. Here, we present a comprehensive genomic analysis of Escherichia coli isolates collected in a hospital in Hangzhou, China. We found that mcr-1-carrying isolates from clinical infections and feces of inpatients and healthy volunteers were genetically diverse and were not closely related phylogenetically, suggesting that clonal expansion is not involved in the spread of mcr-1. The mcr-1 gene was found on either chromosomes or plasmids, but in most of the E. coli isolates, mcr-1 was carried on plasmids. The genetic context of the plasmids showed considerable diversity as evidenced by the different functional insertion sequence (IS) elements, toxin-antitoxin (TA) systems, heavy metal resistance determinants, and Rep proteins of broad-host-range plasmids. Additionally, the genomic analysis revealed nosocomial transmission of mcr-1 and the coexistence of mcr-1 with other genes encoding β-lactamases and fluoroquinolone resistance in the E. coli isolates. These findings indicate that mcr-1 is heterogeneously disseminated in both commensal and pathogenic strains of E. coli, suggest the high flexibility of this gene in its association with diverse genetic backgrounds of the hosts, and provide new insights into the genome epidemiology of mcr-1 among hospital-associated E. coli strains. IMPORTANCE Colistin represents one of the very few available drugs for treating infections caused by extensively multidrug-resistant Gram-negative bacteria. The recently emergent mcr-1 colistin resistance gene threatens the clinical utility of colistin and has gained global attention. How mcr-1 spreads in hospital settings remains unknown and was investigated by whole-genome sequencing of mcr-1-carrying Escherichia coli in this study. The findings revealed extraordinary flexibility of mcr-1 in its spread among genetically diverse E. coli hosts and plasmids, nosocomial transmission of mcr-1-carrying E. coli, and the continuous emergence of novel Inc types of plasmids carrying mcr-1 and new mcr-1 variants. Additionally, mcr-1 was found to be frequently associated with other genes encoding β-lactams and fluoroquinolone resistance. These findings provide important information on the transmission and epidemiology of mcr-1 and are of significant public health importance as the information is expected to facilitate the control of this significant antibiotic resistance threat

Prevalence, risk factors, outcomes, and molecular epidemiology of mcr-1 -positive Enterobacteriaceae in patients and healthy adults from China: an epidemiological and clinical study

Background The mcr-1 gene confers transferable colistin resistance. mcr-1-positive Enterobacteriaceae (MCRPE) have attracted substantial medical, media, and political attention; however, so far studies have not addressed their clinical impact. Herein, we report the prevalence of MCRPE in human infections and carriage, clinical associations of mcr-1-positive Escherichia coli (MCRPEC) infection, and risk factors for MCRPEC carriage. Methods We undertook this study at two hospitals in Zhejiang and Guangdong, China. We did a retrospective cross-sectional assessment of prevalence of MCRPE infection from isolates of Gram-negative bacteria collected at the hospitals from 2007 to 2015 (prevalence study). We did a retrospective case-control study of risk factors for infection and mortality after infection, using all MCRPEC from infection isolates and a random sample of mcr-1-negative E coli infections from the retrospective collection between 2012 and 2015 (infection study). We also did a prospective case-control study to assess risk factors for carriage of MCRPEC in rectal swabs from inpatients with MCRPEC and mcr-1 negative at the hospitals and collected between May and December, 2015, compared with mcr-1-negative isolates from rectal swabs of inpatients (colonisation study). Strains were analysed for antibiotic resistance, plasmid typing, and transfer analysis, and strain relatedness. Findings We identified 21 621 non-duplicate isolates of Enterobacteriaceae, Acinetobacter spp, and Pseudomonas aeruginosa from 18 698 inpatients and 2923 healthy volunteers. Of 17 498 isolates associated with infection, mcr-1 was detected in 76 (1%) of 5332 E coli isolates, 13 (<1%) of 348 Klebsiella pneumoniae, one (<1%) of 890 Enterobacter cloacae, and one (1%) of 162 Enterobacter aerogenes. For the infection study, we included 76 mcr-1-positive clinical E coli isolates and 508 mcr-1-negative isolates. Overall, MCRPEC infection was associated with male sex (209 [41%] vs 47 [63%], adjusted p=0·011), immunosuppression (30 [6%] vs 11 [15%], adjusted p=0·011), and antibiotic use, particularly carbapenems (45 [9%] vs 18 [24%], adjusted p=0·002) and fluoroquinolones (95 [19%] vs 23 [30%], adjusted p=0·017), before hospital admission. For the colonisation study, we screened 2923 rectal swabs from healthy volunteers, of which 19 were MCRPEC, and 1200 rectal swabs from patients, of which 35 were MCRPEC. Antibiotic use before hospital admission (p<0·0001) was associated with MCRPEC carriage in 35 patients compared with 378 patients with mcr-1-negative E coli colonisation, whereas living next to a farm was associated with mcr-1-negative E coli colonisation (p=0·03, univariate test). mcr-1 could be transferred between bacteria at high frequencies (10−1 to 10−3), and plasmid types and MCRPEC multi-locus sequence types (MLSTs) were more variable in Guangdong than in Zhejiang and included the human pathogen ST131. MCRPEC also included 17 unreported ST clades. Interpretation In 2017, colistin will be formally banned from animal feeds in China and switched to human therapy. Infection with MRCPEC is associated with sex, immunosuppression, and previous antibiotic exposure, while colonisation is also associated with antibiotic exposure. MLST and plasmid analysis shows that MCRPEC are diversely spread throughout China and pervasive in Chinese communities

Assembly of 500,000 inter-specific catfish expressed sequence tags and large scale gene-associated marker development for whole genome association studies

Twelve cDNA libraries from two species of catfish have been sequenced, resulting in the generation of nearly 500,000 ESTs

Experimental and Numerical Study on Mixed Lubrication Performance of Journal Bearing Considering Misalignment and Thermal Effect

The shaft misalignment under mixed lubrication is an important factor affecting the running performance of the bearing, which can occur under heavy load and unsatisfactory assembly. This paper presents a misaligned journal mixed lubrication model coupling for the asperity contact effect, elastic deformation, viscosity&ndash;temperature, and viscosity&ndash;pressure effect. The finite difference method was employed to calculate the model, and an experimental apparatus designed in this paper was used to test the friction and temperature characteristics of the specimens. The results show that the pressure field, film thickness, and elastic deformation of the bearing conformed to asymmetric distribution along the axial direction under misalignment conditions and there was a notable end side effect. In addition, the frictional force and side leakage flow were evidently enhanced with the increase in the inclination angle in a certain range. The experimental results showed that there was a visible wear phenomenon on the end sides of the bush and shaft. The research results are beneficial for understanding the mixed lubrication mechanism of misaligned journal bearing

Experimental and Numerical Study on Mixed Lubrication Performance of Journal Bearing Considering Misalignment and Thermal Effect

The shaft misalignment under mixed lubrication is an important factor affecting the running performance of the bearing, which can occur under heavy load and unsatisfactory assembly. This paper presents a misaligned journal mixed lubrication model coupling for the asperity contact effect, elastic deformation, viscosity–temperature, and viscosity–pressure effect. The finite difference method was employed to calculate the model, and an experimental apparatus designed in this paper was used to test the friction and temperature characteristics of the specimens. The results show that the pressure field, film thickness, and elastic deformation of the bearing conformed to asymmetric distribution along the axial direction under misalignment conditions and there was a notable end side effect. In addition, the frictional force and side leakage flow were evidently enhanced with the increase in the inclination angle in a certain range. The experimental results showed that there was a visible wear phenomenon on the end sides of the bush and shaft. The research results are beneficial for understanding the mixed lubrication mechanism of misaligned journal bearing