A comparative evaluation of the shear bond strength of five different orthodontic bonding agents polymerized using halogen and light-emitting diode curing lights: An in vitro investigation

Purpose: With the introduction of photosensitive (light-activated) restorative materials in orthodontics, various methods have been suggested to enhance the polymerization of the materials used, including use of more powerful light curing devices. Bond strength is an important property and determines the amount of force delivered and the treatment duration. Many light-cured bonding materials have become popular but it is the need of the hour to determine the bonding agent that is the most efficient and has the desired bond strength. Aim: To evaluate and compare the shear bond strengths of five different orthodontic light cure bonding materials cured with traditional halogen light and low-intensity light-emitting diode (LED) light curing unit. Materials and Methods: 100 human maxillary premolar teeth, extracted for orthodontic purpose, were used to prepare the samples. 100 maxillary stainless steel bicuspid brackets of 0.018 slot of Roth prescription, manufactured by D-tech Company, were bonded to the prepared tooth surfaces of the mounted samples using five different orthodontic bracket bonding light-cured materials, namely, Enlight, Fuji Ortho LC (resin-modified glass ionomer cement), Orthobond LC, Relybond, and Transbond XT. The bond strength was tested on an Instron Universal testing machine (model no. 5582). Results: In Group 1 (halogen group), Enlight showed the highest shear bond strength (16.4 MPa) and Fuji Ortho LC showed the least bond strength (6.59 MPa) (P value 0.000). In Group 2 (LED group), Transbond showed the highest mean shear bond strength (14.6 MPa) and Orthobond LC showed the least mean shear bond strength (6.27 MPa) (P value 0.000). There was no statistically significant difference in the shear bond strength values of all samples cured using either halogen (mean 11.49 MPa) or LED (mean 11.20 MPa), as the P value was 0.713. Conclusion: Polymerization with both halogen and LED resulted in shear bond strength values which were above the clinically acceptable range given by Reynolds. The LED light curing units produced comparable shear bond strength to that of halogen curing units

Evaluation of relationship between nutritional status and oral health related quality of life in complete denture wearers

Introduction: The prevalence of malnutrition increases with old age, especially in developing countries like India, and it is the most common cause of morbidity and mortality, because of many factors out of which dentate status is one. Aim and Objective: The aim of this study is to evaluate and determine the effect of nutritional status and dietary intake on the oral health-related quality of life (OHRQOL) of elderly edentulous complete denture-wearing patients and to know whether elderly complete denture wearers have a higher risk of malnutrition. The objective was to assess the need to include dietary and nutritional counseling during prosthodontic rehabilitation of elderly edentulous patients. Materials and Methods: A cross-sectional study was conducted among 200 elderly denture-wearing patients above 60 years of age from Nagpur, Maharashtra. Mini-Nutritional Assessment (MNA) questionnaire was used to assess nutritional status, and Geriatric Oral Health Assessment Index (GOHAI) questionnaire was used to determine the OHRQOL of these patients. Descriptive statistics were used to analyze data using SPSS version 21 (SPSS Inc., Chicago, IL, USA). Results: Among the assessed participants, nearly 95% of them had total scores of GOHAI between 12 and 57 which require “needed dental care.” As per MNA, 10.5% had adequate nutrition, 70% were at risk of malnutrition, and remaining 19.5% of participants were malnourished. There was a significant correlation between GOHAI and MNA scores. Conclusion: Low nutritional status was associated with the poor OHRQOL among the elderly. A strong association was found between mean GOHAI and MNA scores and thereby nutritional status and OHRQOL. The use of conventional dentures increases the risk of malnutrition in the elderly due to inability to eat and chew food properly. Dietary analysis and counseling should be strictly incorporated into geriatric treatment planning during prosthetic rehabilitation

Effect of orthodontic pain on quality of life of patients undergoing orthodontic treatment

Introduction: Pain is an important aspect of oral health-related quality of life (OHRQOL). Understanding how patients' pain experiences during their treatment affect their quality of life (QOL) is important and the absence of pain/discomfort is important for achieving a high QOL. Aim and Objective: The objective of this study was to assess the relationship between pain and OHRQOL among patients wearing fixed orthodontic appliances and to evaluate whether patient motivation and counseling had an effect on the pain and discomfort. Materials and Methods: The McGill-Short-Form with visual analog scale and present pain intensity and Oral Health Impact Profile-14 indices were used to determine the intensity and severity of pain and to evaluate the QOL of 200 adolescents undergoing fixed orthodontic treatment during different phases of treatment. Results: There was a significant correlation found between pain and the QOL of patients undergoing orthodontic treatment. Overall score of OHRQOL increased significantly (mean 43.5 ± 10.9) in the initial phase of treatment where the incidence of severe to moderate pain was reported in 80% patients. Ninety-five percent patients felt pain or discomfort. After 1 day of appliance placement, more than 85% of patients experienced severe to mild pain whereas 9% of patients suffered very severe pain. Pain reduced over a week, and at the end of a month, 10.5% patients had moderate pain whereas majority, i.e., 58% of patients complained of only mild pain (P < 0.05). Conclusion: Pain is important sequelae of orthodontic treatment and has a significant effect on the QOL of orthodontic patients, especially during the initial phases of treatment. Patient motivation and counseling by the orthodontist have a profounding effect in reducing the pain and discomfort, improving the QOL, and an overall improvement in the patient compliance affecting the successful outcome of the treatment

Effect of repeated microwave disinfection on the surface hardness of a heat-cured denture base resin: An In vitro study

Statement of the Problem: Disinfection of complete dentures is very crucial to prevent cross-contamination and infection. Microwave disinfection is a quick, easy, and effective means to disinfect dentures. However, the effect of repeated microwave cycles on the surface hardness property of heat-cured polymethyl methacrylate (PMMA) resin is not known. Materials and Methods: A total of 60 samples of heat-cured PMMA resin were fabricated for surface hardness. Each group was divided into four groups, according to the number of microwave cycles (MWC) applied for disinfection: control group (no disinfection) 0MWC, 1MWC group, 3MWC group, and 5MWC group. Results: No significant change on the surface hardness of a heat-cured denture base resin on repeated microwave disinfection. Conclusion: The repeated microwave disinfection showed statistically nonsignificant change on the surface hardness of the PMMA resin. Microwave disinfection can be safely used in regular practice to avoid cross-contamination and can also be suggested to patients for the regular denture hygiene

Evaluation of the role of skull anthropometry for complete denture teeth selection: A cross-sectional study

Background: Success of complete denture treatment lies in the ability to make it indiscernible from the natural. The selection of the six maxillary anterior teeth is of utmost importance as it contributes most to denture esthetics. Although various techniques and methods to determine the width of maxillary anterior teeth and its relation to various body measurements were done, the simple technique of using circumference of head has been less documented, specifically for Indian population. Aims and Objective: The aim of this study was to determine whether a relationship exists between the widths of the upper six anterior teeth to head circumference and the objective was to decide whether head circumference can be used as a deciding criterion to select size of maxillary anterior teeth for Central Indian population. Materials and Methods: This study was done on 300 people who included 135 males and 165 females. The circumference of head (A) and the combined width of the six anterior maxillary teeth (B) were measured and the ratio of A: B was determined. Results: EPO Info software version 6 was used to derive the statistical analysis with unpaired Student's t-tests. In male students, the mean of the ratio between the head circumferences to the combined widths of the anterior maxillary teeth was 10.14:1. In female students, the mean of the ratio between the head circumferences to the widths of the anterior maxillary teeth was 10.09:1. The average circumference of head to mesiodistal width of six anterior teeth ratio was concluded to be 10. Conclusion: Within the limitations of this study, the results suggest that head circumference divided by 10 can be used to select a teeth set with the resulting value as the combined mesiodistal width of six anterior teeth. This can be used as a starting point for determining the width of the anterior maxillary teeth for edentulous patients, which can be further confirmed with the esthetic appearance and with other facial measurements

Knowledge and attitude about relining of complete dentures in clinical practice: A cross-sectional study

Background: Residual ridge resorption is crucial sequelae of tooth loss. Complete dentures are the most common way of rehabilitating edentulous patients. However, with continuing residual ridge resorption, dentures tend to become loose and unstable causing discomfort, chewing disability, and speech problems. Denture relining is an economical means of improving a denture's stability and retention. An understanding of the clinical indications and limitations of these materials and procedures is crucial for clinical success. Aim and Objective: The purpose of this survey was to assess knowledge, attitude, and practice in relining dentures among dental practitioners. Materials and Methods: The cross-sectional survey was conducted using a validated questionnaire on 200 (n = 200) dental practitioners in Nagpur city, Maharashtra. Data analysis was done using proportion test with SPSS EPI INFO software. Results: Although all 200 practitioners were aware of the relining procedure and were routinely carrying out the procedure in their dental clinics, 50% of the practitioners were unaware of the correct relining step by step procedure and were also not sure about the antimicrobial properties of the relining material available in the market. Conclusion: Awareness and scientific knowledge about the relining materials and procedure should be enhanced within general dental practitioners through CDE program and workshops. Steps should be taken to include relining procedure as a part of undergraduate clinical curriculum as well as internship program

Comparative evaluation of three gingival displacement materials for efficacy in tissue management and dimensional accuracy

Aim: Displacement of gingiva is essential for obtaining accurate impressions for the fabrication of fixed prostheses, particularly when the finish line is at or within the gingival sulcus. Various newer impression materials have been introduced to achieve gingival displacement while recording the impressions. A comparative evaluation of these new gingival displacement materials was deemed necessary for efficacy in tissue management and dimensional accuracy. Materials and Methods: Ten individuals were selected according to the inclusion and exclusion criteria for gingival displacement using retraction cord impregnated with aluminum chloride and two polyvinyl siloxane impression materials (Aquasil and NoCord VPS impression system) according to Latin block design. Intraoral scanner and Vernier caliper were used to study and compare the dimensional accuracy of each die obtained following which the dies were sectioned and evaluated under optical microscope with image analyzer to measure the amount of gingival retraction. Results and Conclusion: Statistical analysis showed that the amount of gingival retraction obtained by using retraction cord impregnated with aluminum chloride as gingival retraction agent was maximum as compared to NoCord followed by Aquasil. All three gingival displacement techniques could produce gingival displacement >0.2 mm which is the optimum amount of retraction required for impression making. All the three materials are found to be dimensionally accurate

Pre-Surgical Management of Unilateral Cleft Lip and Palate in a Neonate: A Clinical Report

Cleft lip and palate deformity is a congenital defect of the middle third of the face, consisting of fissures of the upper lip and/or palate. Naso-alveolar molding provides excellent results when considered and started early in the neonatal. Early treatment is important not only due to esthetic and functional concerns, but also for a positive psychological impact it has on the child. In the pre-surgical management, an interdisciplinary approach is necessary where an Orthodontist and a Prosthodontist play a major role. Also any treatment procedure in an infant becomes difficult due to the lack of co-operation from the child. This clinical report describes the multidisciplinary approach for complete pre-surgical management of a neonate with complete unilateral cleft of soft palate, hard palate, alveolar ridge and lip